From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/4] drm/i915: decouple gen9 and gen10 dp signal levels.
Date: Fri, 25 Aug 2017 16:04:29 +0300 [thread overview]
Message-ID: <20170825130429.GS4914@intel.com> (raw)
In-Reply-To: <20170825124633.GQ4914@intel.com>
On Fri, Aug 25, 2017 at 03:46:33PM +0300, Ville Syrjälä wrote:
> On Wed, Aug 16, 2017 at 01:19:49PM -0700, Rodrigo Vivi wrote:
> > Let's decouple bxt, glk and cnl dp signal levels
> > from other DDIs to avoid confusion.
> >
> > No functional change. Only a reorg to avoid messing
> > with currently working DP signal levels when
> > moving voltage swing sequences around to match spec.
> >
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_ddi.c | 26 ++++++++++++++++----------
> > drivers/gpu/drm/i915/intel_dp.c | 10 ++++------
> > drivers/gpu/drm/i915/intel_drv.h | 1 +
> > 3 files changed, 21 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index dd2bdbe82b47..9891ad40d1dc 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -2063,23 +2063,29 @@ static uint32_t intel_ddi_dp_level(struct intel_dp *intel_dp)
> > return translate_signal_level(signal_levels);
> > }
> >
> > -uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
> > +u32 bxt_signal_levels(struct intel_dp *intel_dp)
> > {
> > struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> > struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
> > struct intel_encoder *encoder = &dport->base;
> > enum port port = dport->port;
> > - uint32_t level = intel_ddi_dp_level(intel_dp);
> > + u32 level = intel_ddi_dp_level(intel_dp);
> >
> > - if (IS_GEN9_BC(dev_priv))
> > - skl_ddi_set_iboost(encoder, level);
> > - else if (IS_GEN9_LP(dev_priv))
> > - bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type);
> > - else if (IS_CANNONLAKE(dev_priv)) {
> > + if (IS_CANNONLAKE(dev_priv))
> > cnl_ddi_vswing_sequence(encoder, level);
> > - /* DDI_BUF_CTL bits 27:24 are reserved on CNL */
> > - return 0;
> > - }
> > + else
> > + bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type);
> > +
> > + return 0;
> > +}
> > +
> > +uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
>
> skl_signal_levels() perhaps?
Oh, it actuall gets called on all older DDI platforms. So I guess the
name is OK, but the iboost call needs a platform check then,
>
> > +{
> > + struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> > + struct intel_encoder *encoder = &dport->base;
> > + uint32_t level = intel_ddi_dp_level(intel_dp);
> > +
> > + skl_ddi_set_iboost(encoder, level);
> > return DDI_BUF_TRANS_SELECT(level);
> > }
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 4fd4853b2250..1af4b227e758 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -3506,13 +3506,11 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp)
> > uint32_t signal_levels, mask = 0;
> > uint8_t train_set = intel_dp->train_set[0];
> >
> > - if (HAS_DDI(dev_priv)) {
> > + if (IS_GEN9_LP(dev_priv) || IS_CANNONLAKE(dev_priv)) {
> > + signal_levels = bxt_signal_levels(intel_dp);
> > + } else if (HAS_DDI(dev_priv)) {
> > signal_levels = ddi_signal_levels(intel_dp);
> > -
> > - if (IS_GEN9_LP(dev_priv) || IS_CANNONLAKE(dev_priv))
> > - signal_levels = 0;
> > - else
> > - mask = DDI_BUF_EMP_MASK;
> > + mask = DDI_BUF_EMP_MASK;
> > } else if (IS_CHERRYVIEW(dev_priv)) {
> > signal_levels = chv_signal_levels(intel_dp);
> > } else if (IS_VALLEYVIEW(dev_priv)) {
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index fa47285918f4..913cccc54ad2 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1272,6 +1272,7 @@ void intel_ddi_clock_get(struct intel_encoder *encoder,
> > struct intel_crtc_state *pipe_config);
> > void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
> > bool state);
> > +u32 bxt_signal_levels(struct intel_dp *intel_dp);
> > uint32_t ddi_signal_levels(struct intel_dp *intel_dp);
> > u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder);
> >
> > --
> > 2.13.2
>
> --
> Ville Syrjälä
> Intel OTC
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-08-25 13:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 20:19 [PATCH 1/4] drm/i915: Introduce intel_ddi_dp_level Rodrigo Vivi
2017-08-16 20:19 ` [PATCH 2/4] drm/i915: decouple gen9 and gen10 dp signal levels Rodrigo Vivi
2017-08-25 12:46 ` Ville Syrjälä
2017-08-25 13:04 ` Ville Syrjälä [this message]
2017-08-25 20:55 ` [PATCH 02/10] " Rodrigo Vivi
2017-08-16 20:19 ` [PATCH 3/4] drm/i915: Align vswing sequences with old ddi buffer registers Rodrigo Vivi
2017-08-16 20:19 ` [RFC PATCH 4/4] drm/i915: Enable voltage swing before enabling DDI_BUF_CTL Rodrigo Vivi
2017-08-25 13:02 ` Ville Syrjälä
2017-08-16 20:37 ` ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915: Introduce intel_ddi_dp_level Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170825130429.GS4914@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).