From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/5] drm/i915: move adjusted_x/y from crtc to cache.
Date: Mon, 9 Oct 2017 20:12:03 +0300 [thread overview]
Message-ID: <20171009171203.GH10981@intel.com> (raw)
In-Reply-To: <1505850249-23527-2-git-send-email-juhapekka.heikkila@gmail.com>
On Tue, Sep 19, 2017 at 10:44:05PM +0300, Juha-Pekka Heikkila wrote:
> Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 8 ++++++++
> drivers/gpu/drm/i915/intel_display.c | 10 ++++++----
> drivers/gpu/drm/i915/intel_drv.h | 2 --
> drivers/gpu/drm/i915/intel_fbc.c | 11 ++++++++---
> 4 files changed, 22 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 6d7d871..17960ba 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1095,6 +1095,14 @@ struct intel_fbc {
> int src_w;
> int src_h;
> bool visible;
> + /*
> + * Display surface base address adjustement for
> + * pageflips. Note that on gen4+ this only adjusts up
> + * to a tile, offsets within a tile are handled in
> + * the hw itself (with the TILEOFF register).
> + */
> + int adjusted_x;
> + int adjusted_y;
> } plane;
>
> struct {
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 8599e42..92e8370 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3307,6 +3307,7 @@ static void i9xx_update_primary_plane(struct intel_plane *primary,
> int x = plane_state->main.x;
> int y = plane_state->main.y;
> unsigned long irqflags;
> + struct intel_fbc *fbc = &dev_priv->fbc;
>
> linear_offset = intel_fb_xy_to_linear(x, y, plane_state, 0);
>
> @@ -3315,8 +3316,8 @@ static void i9xx_update_primary_plane(struct intel_plane *primary,
> else
> crtc->dspaddr_offset = linear_offset;
>
> - crtc->adjusted_x = x;
> - crtc->adjusted_y = y;
> + fbc->state_cache.plane.adjusted_x = x;
> + fbc->state_cache.plane.adjusted_y = y;
This shouldn't be here. Just doing the update in
intel_fbc_update_state_cache() should be good enough.
>
> spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>
> @@ -3577,6 +3578,7 @@ static void skylake_update_primary_plane(struct intel_plane *plane,
> int dst_w = drm_rect_width(&plane_state->base.dst);
> int dst_h = drm_rect_height(&plane_state->base.dst);
> unsigned long irqflags;
> + struct intel_fbc *fbc = &dev_priv->fbc;
>
> /* Sizes are 0 based */
> src_w--;
> @@ -3586,8 +3588,8 @@ static void skylake_update_primary_plane(struct intel_plane *plane,
>
> crtc->dspaddr_offset = surf_addr;
>
> - crtc->adjusted_x = src_x;
> - crtc->adjusted_y = src_y;
> + fbc->state_cache.plane.adjusted_x = src_x;
> + fbc->state_cache.plane.adjusted_y = src_y;
ditto
>
> spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 3078076..62aada7 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -807,8 +807,6 @@ struct intel_crtc {
> * gen4+ this only adjusts up to a tile, offsets within a tile are
> * handled in the hw itself (with the TILEOFF register). */
> u32 dspaddr_offset;
> - int adjusted_x;
> - int adjusted_y;
>
> struct intel_crtc_state *config;
>
> diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c
> index 58a772d..dc059808 100644
> --- a/drivers/gpu/drm/i915/intel_fbc.c
> +++ b/drivers/gpu/drm/i915/intel_fbc.c
> @@ -71,7 +71,10 @@ static inline bool no_fbc_on_multiple_pipes(struct drm_i915_private *dev_priv)
> */
> static unsigned int get_crtc_fence_y_offset(struct intel_crtc *crtc)
> {
> - return crtc->base.y - crtc->adjusted_y;
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + struct intel_fbc *fbc = &dev_priv->fbc;
> +
> + return crtc->base.y - fbc->state_cache.plane.adjusted_y;
> }
>
> /*
> @@ -727,8 +730,8 @@ static bool intel_fbc_hw_tracking_covers_screen(struct intel_crtc *crtc)
>
> intel_fbc_get_plane_source_size(&fbc->state_cache, &effective_w,
> &effective_h);
> - effective_w += crtc->adjusted_x;
> - effective_h += crtc->adjusted_y;
> + effective_w += fbc->state_cache.plane.adjusted_x;
> + effective_h += fbc->state_cache.plane.adjusted_y;
>
> return effective_w <= max_w && effective_h <= max_h;
> }
> @@ -757,6 +760,8 @@ static void intel_fbc_update_state_cache(struct intel_crtc *crtc,
> cache->plane.src_w = drm_rect_width(&plane_state->base.src) >> 16;
> cache->plane.src_h = drm_rect_height(&plane_state->base.src) >> 16;
> cache->plane.visible = plane_state->base.visible;
> + cache->plane.adjusted_x = plane_state->main.x;
> + cache->plane.adjusted_y = plane_state->main.y;
>
> if (!cache->plane.visible)
> return;
> --
> 2.7.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-10-09 17:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-19 19:44 [PATCH 0/5] drm/i915: Skylake plane update/disable unifications [v5] Juha-Pekka Heikkila
2017-09-19 19:44 ` [PATCH 1/5] drm/i915: move adjusted_x/y from crtc to cache Juha-Pekka Heikkila
2017-10-09 17:12 ` Ville Syrjälä [this message]
2017-09-19 19:44 ` [PATCH 2/5] drm/i915: Unify skylake plane update Juha-Pekka Heikkila
2017-09-19 19:44 ` [PATCH 3/5] drm/i915: Unify skylake plane disable Juha-Pekka Heikkila
2017-09-19 19:44 ` [PATCH 4/5] drm/i915: dspaddr_offset doesn't need to be more than local variable Juha-Pekka Heikkila
2017-10-09 17:13 ` Ville Syrjälä
2017-09-19 19:44 ` [PATCH 5/5] drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y Juha-Pekka Heikkila
2017-10-09 17:14 ` Ville Syrjälä
2017-09-19 21:13 ` ✓ Fi.CI.BAT: success for drm/i915: Skylake plane update/disable unifications [v5] Patchwork
2017-09-20 1:00 ` ✓ Fi.CI.IGT: " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2017-10-17 20:08 [PATCH 0/5] drm/i915: Skylake plane update/disable unifications [v6] Juha-Pekka Heikkila
2017-10-17 20:08 ` [PATCH 1/5] drm/i915: move adjusted_x/y from crtc to cache Juha-Pekka Heikkila
2017-10-18 14:43 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171009171203.GH10981@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=juhapekka.heikkila@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox