intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Cc: "intel-gfx@lists.freedesktop.org" <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 01/10] drm/i915: Eliminate some encoder->crtc usage from DP code
Date: Thu, 9 Nov 2017 16:36:08 +0200	[thread overview]
Message-ID: <20171109143608.GQ10981@intel.com> (raw)
In-Reply-To: <1510192529.8287.22.camel@dk-H97M-D3H>

On Thu, Nov 09, 2017 at 01:35:01AM +0000, Pandiyan, Dhinakaran wrote:
> 
> On Tue, 2017-10-31 at 22:51 +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > Extract the current crtc from the crtc state rather than via
> > the legacy encoder->crtc pointer whenever possible.
> > 
> 
> There are still some encoder->crtc remaining. How much of a problem is
> this?

The ones that are left are link training and sink crc stuff mostly IIRC.
Those should get cleaned up, but they require a bit more than a trivial
conversion.

It's not a real problem having those. Things should still work
correctly given that we do update the legacy pointers somewhere.

> 
> 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_dp.c | 63 +++++++++++++++++++----------------------
> >  1 file changed, 29 insertions(+), 34 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index d27c0145ac91..4f64d83537d9 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -129,10 +129,12 @@ static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
> >  	return enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> >  }
> >  
> > -static void intel_dp_link_down(struct intel_dp *intel_dp);
> > +static void intel_dp_link_down(struct intel_encoder *encoder,
> > +			       const struct intel_crtc_state *old_crtc_state);
> >  static bool edp_panel_vdd_on(struct intel_dp *intel_dp);
> >  static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
> > -static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp);
> > +static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
> > +					   const struct intel_crtc_state *crtc_state);
> >  static void vlv_steal_power_sequencer(struct drm_device *dev,
> >  				      enum pipe pipe);
> >  static void intel_dp_unset_edid(struct intel_dp *intel_dp);
> > @@ -1858,7 +1860,7 @@ static void intel_dp_prepare(struct intel_encoder *encoder,
> >  	struct drm_i915_private *dev_priv = to_i915(dev);
> >  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> >  	enum port port = dp_to_dig_port(intel_dp)->port;
> > -	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> > +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> >  	const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
> >  
> >  	intel_dp_set_link_params(intel_dp, pipe_config->port_clock,
> > @@ -2491,10 +2493,10 @@ static void ironlake_edp_pll_on(struct intel_dp *intel_dp,
> >  	udelay(200);
> >  }
> >  
> > -static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
> > +static void ironlake_edp_pll_off(struct intel_dp *intel_dp,
> > +				 const struct intel_crtc_state *old_crtc_state)
> >  {
> > -	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > -	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
> > +	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
> >  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> >  
> >  	assert_pipe_disabled(dev_priv, crtc->pipe);
> > @@ -2624,7 +2626,7 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
> >  	struct drm_device *dev = encoder->base.dev;
> >  	struct drm_i915_private *dev_priv = to_i915(dev);
> >  	enum port port = dp_to_dig_port(intel_dp)->port;
> > -	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> > +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> >  
> >  	if (encoder->type == INTEL_OUTPUT_EDP)
> >  		pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
> > @@ -2723,12 +2725,10 @@ static void g4x_disable_dp(struct intel_encoder *encoder,
> >  			   const struct intel_crtc_state *old_crtc_state,
> >  			   const struct drm_connector_state *old_conn_state)
> >  {
> > -	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > -
> >  	intel_disable_dp(encoder, old_crtc_state, old_conn_state);
> >  
> >  	/* disable the port before the pipe on g4x */
> > -	intel_dp_link_down(intel_dp);
> > +	intel_dp_link_down(encoder, old_crtc_state);
> >  }
> >  
> >  static void ilk_disable_dp(struct intel_encoder *encoder,
> > @@ -2754,33 +2754,29 @@ static void ilk_post_disable_dp(struct intel_encoder *encoder,
> >  				const struct drm_connector_state *old_conn_state)
> >  {
> >  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > -	enum port port = dp_to_dig_port(intel_dp)->port;
> > +	enum port port = encoder->port;
> >  
> > -	intel_dp_link_down(intel_dp);
> > +	intel_dp_link_down(encoder, old_crtc_state);
> >  
> >  	/* Only ilk+ has port A */
> >  	if (port == PORT_A)
> > -		ironlake_edp_pll_off(intel_dp);
> > +		ironlake_edp_pll_off(intel_dp, old_crtc_state);
> >  }
> >  
> >  static void vlv_post_disable_dp(struct intel_encoder *encoder,
> >  				const struct intel_crtc_state *old_crtc_state,
> >  				const struct drm_connector_state *old_conn_state)
> >  {
> > -	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > -
> > -	intel_dp_link_down(intel_dp);
> > +	intel_dp_link_down(encoder, old_crtc_state);
> >  }
> >  
> >  static void chv_post_disable_dp(struct intel_encoder *encoder,
> >  				const struct intel_crtc_state *old_crtc_state,
> >  				const struct drm_connector_state *old_conn_state)
> >  {
> > -	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > -	struct drm_device *dev = encoder->base.dev;
> > -	struct drm_i915_private *dev_priv = to_i915(dev);
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> >  
> > -	intel_dp_link_down(intel_dp);
> > +	intel_dp_link_down(encoder, old_crtc_state);
> >  
> >  	mutex_lock(&dev_priv->sb_lock);
> >  
> > @@ -2909,7 +2905,7 @@ static void intel_enable_dp(struct intel_encoder *encoder,
> >  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> >  	struct drm_device *dev = encoder->base.dev;
> >  	struct drm_i915_private *dev_priv = to_i915(dev);
> > -	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> > +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> >  	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
> >  	enum pipe pipe = crtc->pipe;
> >  
> > @@ -2919,7 +2915,7 @@ static void intel_enable_dp(struct intel_encoder *encoder,
> >  	pps_lock(intel_dp);
> >  
> >  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > -		vlv_init_panel_power_sequencer(intel_dp);
> > +		vlv_init_panel_power_sequencer(encoder, pipe_config);
> >  
> >  	intel_dp_enable_port(intel_dp, pipe_config);
> >  
> > @@ -3047,13 +3043,13 @@ static void vlv_steal_power_sequencer(struct drm_device *dev,
> >  	}
> >  }
> >  
> > -static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
> > +static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
> > +					   const struct intel_crtc_state *crtc_state)
> >  {
> > -	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > -	struct intel_encoder *encoder = &intel_dig_port->base;
> > +	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> >  	struct drm_device *dev = encoder->base.dev;
> >  	struct drm_i915_private *dev_priv = to_i915(dev);
> > -	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> >  
> >  	lockdep_assert_held(&dev_priv->pps_mutex);
> >  
> > @@ -3084,7 +3080,7 @@ static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
> >  	intel_dp->pps_pipe = crtc->pipe;
> >  
> >  	DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n",
> > -		      pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port));
> > +		      pipe_name(intel_dp->pps_pipe), port_name(encoder->port));
> >  
> >  	/* init power sequencer on this pipe and port */
> >  	intel_dp_init_panel_power_sequencer(dev, intel_dp);
> > @@ -3624,13 +3620,13 @@ void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
> >  }
> >  
> >  static void
> > -intel_dp_link_down(struct intel_dp *intel_dp)
> > +intel_dp_link_down(struct intel_encoder *encoder,
> > +		   const struct intel_crtc_state *old_crtc_state)
> >  {
> > -	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > -	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
> > -	enum port port = intel_dig_port->port;
> > -	struct drm_device *dev = intel_dig_port->base.base.dev;
> > -	struct drm_i915_private *dev_priv = to_i915(dev);
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > +	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
> > +	enum port port = encoder->port;
> >  	uint32_t DP = intel_dp->DP;
> >  
> >  	if (WARN_ON(HAS_DDI(dev_priv)))
> > @@ -5493,7 +5489,6 @@ static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
> >  
> >  	dig_port = dp_to_dig_port(intel_dp);
> >  	encoder = &dig_port->base;
> > -	intel_crtc = to_intel_crtc(encoder->base.crtc);
> >  
> >  	if (!intel_crtc) {
> >  		DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-11-09 14:36 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-31 20:51 [PATCH 00/10] drm/i915: Nuke dig_port->port and assorted cleanups Ville Syrjala
2017-10-31 20:51 ` [PATCH 01/10] drm/i915: Eliminate some encoder->crtc usage from DP code Ville Syrjala
2017-11-09  1:35   ` Pandiyan, Dhinakaran
2017-11-09 14:36     ` Ville Syrjälä [this message]
2017-10-31 20:51 ` [PATCH 02/10] drm/i915: Eliminate some encoder->crtc usage from DSI code Ville Syrjala
2017-11-09  1:36   ` Pandiyan, Dhinakaran
2017-11-09 14:43     ` Ville Syrjälä
2017-10-31 20:51 ` [PATCH 03/10] drm/i915: Eliminate some encoder->crtc usage from SDVO code Ville Syrjala
2017-10-31 20:51 ` [PATCH 04/10] drm/i915: Eliminate some encoder->crtc usage from TV code Ville Syrjala
2017-10-31 20:51 ` [PATCH 05/10] drm/i915: Pass crtc state to DPIO PHY functions Ville Syrjala
2017-10-31 20:51 ` [PATCH 06/10] drm/i915: Eliminate crtc->config usage from CRT code Ville Syrjala
2017-10-31 20:51 ` [PATCH 07/10] drm/i915: Replace dig_port->port with encoder port for BXT DPLL selection Ville Syrjala
2017-10-31 20:51 ` [PATCH 08/10] drm/i915: Nuke intel_digital_port->port Ville Syrjala
2017-11-09  1:37   ` Pandiyan, Dhinakaran
2017-11-09 13:50     ` Ville Syrjälä
2017-11-09 15:24   ` [PATCH v2 " Ville Syrjala
2017-10-31 20:51 ` [PATCH 09/10] drm/i915: Clean up PPS code calling conventions Ville Syrjala
2017-10-31 20:51 ` [PATCH 10/10] drm/i915: Clean up DP code local variables and " Ville Syrjala
2017-11-09  3:01   ` Pandiyan, Dhinakaran
2017-11-09 15:27     ` Ville Syrjälä
2017-11-09 15:27   ` [PATCH v2 " Ville Syrjala
2017-10-31 22:31 ` ✗ Fi.CI.BAT: warning for drm/i915: Nuke dig_port->port and assorted cleanups Patchwork
2017-11-01  9:55 ` [PATCH 00/10] " Jani Nikula
2017-11-09  3:08   ` Pandiyan, Dhinakaran
2017-11-09 18:26     ` Ville Syrjälä
2017-11-09 16:01 ` ✓ Fi.CI.BAT: success for drm/i915: Nuke dig_port->port and assorted cleanups (rev3) Patchwork
2017-11-09 16:59 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171109143608.GQ10981@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dhinakaran.pandiyan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).