From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Shankar, Uma" <uma.shankar@intel.com>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Lin, Johnson" <johnson.lin@intel.com>
Subject: Re: [PATCH 3/4] drm/i915: Rename pipe CSC to use ilk_ prefix
Date: Wed, 28 Feb 2018 15:05:27 +0200 [thread overview]
Message-ID: <20180228130527.GF5453@intel.com> (raw)
In-Reply-To: <E7C9878FBA1C6D42A1CA3F62AEB6945F7F121DE9@BGSMSX104.gar.corp.intel.com>
On Fri, Feb 23, 2018 at 01:05:25PM +0000, Shankar, Uma wrote:
>
>
> >-----Original Message-----
> >From: Ville Syrjala [mailto:ville.syrjala@linux.intel.com]
> >Sent: Friday, February 23, 2018 3:13 AM
> >To: intel-gfx@lists.freedesktop.org
> >Cc: Lin, Johnson <johnson.lin@intel.com>; Shankar, Uma
> ><uma.shankar@intel.com>; Sharma, Shashank <shashank.sharma@intel.com>
> >Subject: [PATCH 3/4] drm/i915: Rename pipe CSC to use ilk_ prefix
> >
> >From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> >The pipe CSC was introduced by ILK, so change everything related to use ilk_ as
> >the prefix.
> >
>
> Looks ok to me.
> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Patches 2 and 3 pushed to dinq. Thanks for the review.
Patch 4 still needs an r-b...
>
> >Cc: Johnson Lin <johnson.lin@intel.com>
> >Cc: Uma Shankar <uma.shankar@intel.com>
> >Cc: Shashank Sharma <shashank.sharma@intel.com>
> >Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >---
> > drivers/gpu/drm/i915/intel_color.c | 39 +++++++++++++++++++-------------------
> > 1 file changed, 19 insertions(+), 20 deletions(-)
> >
> >diff --git a/drivers/gpu/drm/i915/intel_color.c
> >b/drivers/gpu/drm/i915/intel_color.c
> >index c9af260be113..af1e61d3bacd 100644
> >--- a/drivers/gpu/drm/i915/intel_color.c
> >+++ b/drivers/gpu/drm/i915/intel_color.c
> >@@ -66,13 +66,13 @@
> > * of the CTM coefficient and we write the value from bit 3. We also round the
> > * value.
> > */
> >-#define I9XX_CSC_COEFF_FP(coeff, fbits) \
> >+#define ILK_CSC_COEFF_FP(coeff, fbits) \
> > (clamp_val(((coeff) >> (32 - (fbits) - 3)) + 4, 0, 0xfff) & 0xff8)
> >
> >-#define I9XX_CSC_COEFF_LIMITED_RANGE \
> >- I9XX_CSC_COEFF_FP(CTM_COEFF_LIMITED_RANGE, 9)
> >-#define I9XX_CSC_COEFF_1_0 \
> >- ((7 << 12) | I9XX_CSC_COEFF_FP(CTM_COEFF_1_0, 8))
> >+#define ILK_CSC_COEFF_LIMITED_RANGE \
> >+ ILK_CSC_COEFF_FP(CTM_COEFF_LIMITED_RANGE, 9)
> >+#define ILK_CSC_COEFF_1_0 \
> >+ ((7 << 12) | ILK_CSC_COEFF_FP(CTM_COEFF_1_0, 8))
> >
> > static bool crtc_state_is_legacy_gamma(struct drm_crtc_state *state) { @@ -
> >108,7 +108,7 @@ static u64 *ctm_mult_by_limited(u64 *result, const u64 *input)
> > return result;
> > }
> >
> >-static void i9xx_load_ycbcr_conversion_matrix(struct intel_crtc *intel_crtc)
> >+static void ilk_load_ycbcr_conversion_matrix(struct intel_crtc
> >+*intel_crtc)
> > {
> > int pipe = intel_crtc->pipe;
> > struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); @@ -
> >132,8 +132,7 @@ static void i9xx_load_ycbcr_conversion_matrix(struct
> >intel_crtc *intel_crtc)
> > I915_WRITE(PIPE_CSC_MODE(pipe), 0);
> > }
> >
> >-/* Set up the pipe CSC unit. */
> >-static void i9xx_load_csc_matrix(struct drm_crtc_state *crtc_state)
> >+static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)
> > {
> > struct drm_crtc *crtc = crtc_state->crtc;
> > struct drm_i915_private *dev_priv = to_i915(crtc->dev); @@ -143,7
> >+142,7 @@ static void i9xx_load_csc_matrix(struct drm_crtc_state *crtc_state)
> > struct intel_crtc_state *intel_crtc_state = to_intel_crtc_state(crtc_state);
> >
> > if (intel_crtc_state->ycbcr420) {
> >- i9xx_load_ycbcr_conversion_matrix(intel_crtc);
> >+ ilk_load_ycbcr_conversion_matrix(intel_crtc);
> > return;
> > } else if (crtc_state->ctm) {
> > struct drm_color_ctm *ctm =
> >@@ -175,21 +174,21 @@ static void i9xx_load_csc_matrix(struct drm_crtc_state
> >*crtc_state)
> >
> > if (abs_coeff < CTM_COEFF_0_125)
> > coeffs[i] |= (3 << 12) |
> >- I9XX_CSC_COEFF_FP(abs_coeff, 12);
> >+ ILK_CSC_COEFF_FP(abs_coeff, 12);
> > else if (abs_coeff < CTM_COEFF_0_25)
> > coeffs[i] |= (2 << 12) |
> >- I9XX_CSC_COEFF_FP(abs_coeff, 11);
> >+ ILK_CSC_COEFF_FP(abs_coeff, 11);
> > else if (abs_coeff < CTM_COEFF_0_5)
> > coeffs[i] |= (1 << 12) |
> >- I9XX_CSC_COEFF_FP(abs_coeff, 10);
> >+ ILK_CSC_COEFF_FP(abs_coeff, 10);
> > else if (abs_coeff < CTM_COEFF_1_0)
> >- coeffs[i] |= I9XX_CSC_COEFF_FP(abs_coeff, 9);
> >+ coeffs[i] |= ILK_CSC_COEFF_FP(abs_coeff, 9);
> > else if (abs_coeff < CTM_COEFF_2_0)
> > coeffs[i] |= (7 << 12) |
> >- I9XX_CSC_COEFF_FP(abs_coeff, 8);
> >+ ILK_CSC_COEFF_FP(abs_coeff, 8);
> > else
> > coeffs[i] |= (6 << 12) |
> >- I9XX_CSC_COEFF_FP(abs_coeff, 7);
> >+ ILK_CSC_COEFF_FP(abs_coeff, 7);
> > }
> > } else {
> > /*
> >@@ -203,9 +202,9 @@ static void i9xx_load_csc_matrix(struct drm_crtc_state
> >*crtc_state)
> > for (i = 0; i < 3; i++) {
> > if (intel_crtc_state->limited_color_range)
> > coeffs[i * 3 + i] =
> >- I9XX_CSC_COEFF_LIMITED_RANGE;
> >+ ILK_CSC_COEFF_LIMITED_RANGE;
> > else
> >- coeffs[i * 3 + i] = I9XX_CSC_COEFF_1_0;
> >+ coeffs[i * 3 + i] = ILK_CSC_COEFF_1_0;
> > }
> > }
> >
> >@@ -651,14 +650,14 @@ void intel_color_init(struct drm_crtc *crtc)
> > dev_priv->display.load_csc_matrix =
> >cherryview_load_csc_matrix;
> > dev_priv->display.load_luts = cherryview_load_luts;
> > } else if (IS_HASWELL(dev_priv)) {
> >- dev_priv->display.load_csc_matrix = i9xx_load_csc_matrix;
> >+ dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
> > dev_priv->display.load_luts = haswell_load_luts;
> > } else if (IS_BROADWELL(dev_priv) || IS_GEN9_BC(dev_priv) ||
> > IS_BROXTON(dev_priv)) {
> >- dev_priv->display.load_csc_matrix = i9xx_load_csc_matrix;
> >+ dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
> > dev_priv->display.load_luts = broadwell_load_luts;
> > } else if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
> >- dev_priv->display.load_csc_matrix = i9xx_load_csc_matrix;
> >+ dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
> > dev_priv->display.load_luts = glk_load_luts;
> > } else {
> > dev_priv->display.load_luts = i9xx_load_luts;
> >--
> >2.16.1
>
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-02-28 13:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-22 21:42 [PATCH 1/4] drm/uapi: The ctm matrix uses sign-magnitude representation Ville Syrjala
2018-02-22 21:42 ` [PATCH 2/4] drm/i915: Remove the pointless 1:1 matrix copy Ville Syrjala
2018-02-23 12:44 ` Shankar, Uma
2018-02-22 21:42 ` [PATCH 3/4] drm/i915: Rename pipe CSC to use ilk_ prefix Ville Syrjala
2018-02-23 13:05 ` Shankar, Uma
2018-02-28 13:05 ` Ville Syrjälä [this message]
2018-02-22 21:42 ` [PATCH 4/4] drm/i915: Don't mangle the CTM on pre-HSW Ville Syrjala
2018-02-23 13:33 ` Shankar, Uma
2018-02-23 13:52 ` Ville Syrjälä
2018-02-28 13:11 ` Shankar, Uma
2018-02-28 13:19 ` Ville Syrjälä
2018-02-22 22:17 ` ✓ Fi.CI.BAT: success for series starting with [1/4] drm/uapi: The ctm matrix uses sign-magnitude representation Patchwork
2018-02-23 5:55 ` ✗ Fi.CI.IGT: warning " Patchwork
2018-02-23 12:39 ` [PATCH 1/4] " Shankar, Uma
2018-02-23 13:52 ` Brian Starkey
2018-02-23 14:04 ` Ville Syrjälä
2018-02-28 12:56 ` [Intel-gfx] " Ville Syrjälä
2018-02-23 16:26 ` Harry Wentland
2018-02-23 16:54 ` Ville Syrjälä
2018-03-06 7:51 ` Daniel Vetter
2018-03-06 15:41 ` Harry Wentland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180228130527.GF5453@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=johnson.lin@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).