From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
intel-gfx@lists.freedesktop.org,
Keith Packard <keithp@keithp.com>,
dri-devel@lists.freedesktop.org
Subject: Re: [RFC][PATCH 11/11] drm: Sprinkle lockdep asserts for edid/display_info
Date: Tue, 6 Mar 2018 14:18:10 +0200 [thread overview]
Message-ID: <20180306121810.GF5453@intel.com> (raw)
In-Reply-To: <20180306093127.GO22212@phenom.ffwll.local>
On Tue, Mar 06, 2018 at 10:31:27AM +0100, Daniel Vetter wrote:
> On Tue, Feb 27, 2018 at 02:57:00PM +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > edid and display_info are protected by mode_config.mutex. Add lockdep
> > asserts to make sure we're not accessing things w/o the lock.
> >
> > FIXME: pretty sure this will blow up with amdgpu as they seem
> > to be doing edid updates even from the modeset path. Need to figure
> > out what to do about that. Maybe protect the edid/display info with
> > with connection_mutex instead of mode_config.mutex?
>
> Imo not doing EDID udpates from the modeset path is the right fix. I can't
> think of any reasonable reason to do that at least. Can you point me at
> the relevant amdgpu code pls (I'm lazy, sry)?
It was some MST thing I believe... (should have written it down)
amdgpu_dm_atomic_check() -> dm_update_crtcs_state() ->
create_stream_for_sink() -> dm_dp_mst_dc_sink_create() ->
get_edid/update_edid_property
>
> Otherwise I think this is a real good patch.
>
> Thanks, Daniel
>
> >
> > Cc: Keith Packard <keithp@keithp.com>
> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Cc: Harry Wentland <harry.wentland@amd.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/drm_connector.c | 4 ++++
> > drivers/gpu/drm/drm_edid.c | 2 ++
> > drivers/gpu/drm/drm_probe_helper.c | 2 +-
> > 3 files changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> > index 122060792b6f..a9f3536f4e94 100644
> > --- a/drivers/gpu/drm/drm_connector.c
> > +++ b/drivers/gpu/drm/drm_connector.c
> > @@ -1374,6 +1374,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
> > size_t size = 0;
> > int ret;
> >
> > + lockdep_assert_held(&dev->mode_config.mutex);
> > +
> > /* ignore requests to set edid when overridden */
> > if (connector->override_edid)
> > return 0;
> > @@ -1770,6 +1772,8 @@ void drm_connector_reset_display_info(struct drm_connector *connector)
> > {
> > struct drm_display_info *info = &connector->display_info;
> >
> > + lockdep_assert_held(&connector->dev->mode_config.mutex);
> > +
> > memset(info, 0, sizeof(*info));
> > }
> > EXPORT_SYMBOL_GPL(drm_connector_reset_display_info);
> > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > index 618093c4a039..7f9e9236114b 100644
> > --- a/drivers/gpu/drm/drm_edid.c
> > +++ b/drivers/gpu/drm/drm_edid.c
> > @@ -4440,6 +4440,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> > struct drm_display_info *info = &connector->display_info;
> > u32 quirks = edid_get_quirks(edid);
> >
> > + lockdep_assert_held(&connector->dev->mode_config.mutex);
> > +
> > info->width_mm = edid->width_cm * 10;
> > info->height_mm = edid->height_cm * 10;
> >
> > diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> > index 7dc7e635d7e4..2a2afcf72788 100644
> > --- a/drivers/gpu/drm/drm_probe_helper.c
> > +++ b/drivers/gpu/drm/drm_probe_helper.c
> > @@ -400,7 +400,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
> > enum drm_connector_status old_status;
> > struct drm_modeset_acquire_ctx ctx;
> >
> > - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
> > + lockdep_assert_held(&dev->mode_config.mutex);
> >
> > drm_modeset_acquire_init(&ctx, 0);
> >
> > --
> > 2.13.6
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-03-06 12:18 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 12:56 [RFC][PATCH 00/11] drm: Try to make display info less nuts Ville Syrjala
2018-02-27 12:56 ` [RFC][PATCH 01/11] drm/gma500: Fill display_info.{width, height}_mm from .get_modes() Ville Syrjala
2018-02-27 12:56 ` [RFC][PATCH 02/11] drm/i915: " Ville Syrjala
2018-02-27 12:56 ` [RFC][PATCH 03/11] drm/shmobile: Don't fill display_info.{width, height}_mm at init time Ville Syrjala
2018-02-27 12:56 ` [RFC][PATCH 04/11] drm: Split the display info into static and dynamic parts Ville Syrjala
2018-02-27 13:08 ` Maxime Ripard
2018-02-27 13:23 ` Philipp Zabel
2018-02-28 4:58 ` Archit Taneja
2018-02-28 8:46 ` Sharma, Shashank
2018-02-28 9:17 ` Stefan Agner
2018-02-28 21:11 ` Alex Deucher
2018-03-02 7:59 ` Linus Walleij
2018-03-06 9:41 ` Daniel Vetter
2018-02-27 12:56 ` [RFC][PATCH 05/11] drm/edid: Clear display info fully Ville Syrjala
2018-02-28 8:58 ` Sharma, Shashank
2018-03-06 9:33 ` Daniel Vetter
2018-03-06 9:42 ` Daniel Vetter
2018-03-06 9:52 ` Daniel Vetter
2018-02-27 12:56 ` [RFC][PATCH 06/11] drm/edid: Don't call drm_add_display_info() with an invalid EDID Ville Syrjala
2018-03-06 9:45 ` Daniel Vetter
2018-02-27 12:56 ` [RFC][PATCH 07/11] drm/probe-helper: Avoid iterating the list twice on ww backoff Ville Syrjala
2018-03-06 9:49 ` Daniel Vetter
2018-03-06 11:48 ` Ville Syrjälä
2018-02-27 12:56 ` [RFC][PATCH 08/11] drm: Add drm_connector_fill_modes() Ville Syrjala
2018-03-06 10:00 ` Daniel Vetter
2018-03-06 10:30 ` Ville Syrjälä
2018-02-27 12:56 ` [RFC][PATCH 09/11] drm: Fix getconnector locking Ville Syrjala
2018-03-06 9:55 ` Daniel Vetter
2018-02-27 12:56 ` [RFC][PATCH 10/11] drm: Fix debugfs edid_override locking Ville Syrjala
2018-03-06 9:56 ` Daniel Vetter
2018-02-27 12:57 ` [RFC][PATCH 11/11] drm: Sprinkle lockdep asserts for edid/display_info Ville Syrjala
2018-03-06 9:31 ` Daniel Vetter
2018-03-06 12:18 ` Ville Syrjälä [this message]
2018-03-06 16:23 ` Harry Wentland
2018-03-06 17:13 ` Daniel Vetter
2018-03-06 18:32 ` Harry Wentland
2018-03-07 16:26 ` Daniel Vetter
2018-02-27 14:06 ` ✓ Fi.CI.BAT: success for drm: Try to make display info less nuts Patchwork
2018-02-27 20:14 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180306121810.GF5453@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=keithp@keithp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).