Re: ✗ Fi.CI.BAT: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev3)

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Tue, Feb 27, 2018 at 12:08:25PM +0200, Ville Syrjälä wrote:
> On Wed, Feb 07, 2018 at 10:57:59AM -0000, Patchwork wrote:
> > == Series Details ==
> > 
> > Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev3)
> > URL   : https://patchwork.freedesktop.org/series/36068/
> > State : warning
> > 
> > == Summary ==
> > 
> > Series 36068v3 YCBCR 4:2:0/4:4:4 output support for LSPCON
> > https://patchwork.freedesktop.org/api/1.0/series/36068/revisions/3/mbox/
> > 
> > Test debugfs_test:
> >         Subgroup read_all_entries:
> >                 pass       -> DMESG-WARN (fi-elk-e7500) fdo#103989 +11
> >                 pass       -> DMESG-WARN (fi-ilk-650)
> >                 pass       -> DMESG-WARN (fi-snb-2600)
> >                 pass       -> DMESG-WARN (fi-byt-j1900)
> >                 pass       -> DMESG-WARN (fi-byt-n2820)
> >                 pass       -> DMESG-WARN (fi-bsw-n3050)
> 
> Looks like all of these are due to missing readout in
> i9xx/ilk_get_pipe_config().

OK, just to be clear. I don't think there's much use in me looking at
this stuff until this obvious fail is fixed. So fix this and repost
whatever changed, and then we can see what fails remain.

> 
> >         Subgroup basic-s4-devices:
> >                 pass       -> DMESG-WARN (fi-blb-e6850)
> >                 pass       -> DMESG-WARN (fi-pnv-d510)
> >                 pass       -> DMESG-WARN (fi-ilk-650)
> >                 pass       -> DMESG-WARN (fi-snb-2520m)
> >                 pass       -> DMESG-WARN (fi-snb-2600)
> >                 pass       -> DMESG-WARN (fi-ivb-3520m)
> >                 pass       -> DMESG-WARN (fi-ivb-3770)
> >                 pass       -> DMESG-WARN (fi-byt-j1900)
> >                 pass       -> DMESG-WARN (fi-byt-n2820)
> >                 pass       -> DMESG-WARN (fi-hsw-4770)
> 
> The hsw case must be something a bit more subtle since you did add
> something to hsw_get_pipe_config(). I can't immediately see what would
> cause this. Probably best to fix the other platforms first and get
> a new set of results with the extra noise removed, and then we can see
> if you hit the same warn on the other platforms as you have on hsw.
> 
> -- 
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx