From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: "José Roberto de Souza" <jose.souza@intel.com>
Cc: intel-gfx@lists.freedesktop.org,
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: Re: [PATCH v2 6/9] drm/i915/psr/bdw+: Enable CRC check in the static frame on the sink side
Date: Fri, 20 Apr 2018 14:16:55 -0700 [thread overview]
Message-ID: <20180420211655.GF1310@intel.com> (raw)
In-Reply-To: <20180418224311.16577-6-jose.souza@intel.com>
On Wed, Apr 18, 2018 at 03:43:08PM -0700, José Roberto de Souza wrote:
> Sink can be configured to calculate the CRC over the static frame and
> compare with the CRC calculated and transmited in the VSC SDP by
> source, if there is a mismatch sink will do a short pulse in HPD
> and set DP_PSR_LINK_CRC_ERROR on DP_PSR_ERROR_STATUS.
good idea, but first we need to stop using sink crc for the tests :(
and make sure the interrupts are being handled correct...
(I was going to mention an extra requirement that was to make sure
that you implement the needed Wa, but I noticed you already took care
of this)
>
> Also spec recommends to disable MAX_SLEEP as a trigger to exit PSR when
> CRC check is enabled to improve power savings.
my first impression was that this should be a separated patch
in case we needed to revert it doesn't revert both functionalities...
however I saw this was Display WA #0388 with a mention:
"This becomes standard required programming for all subsequent projects."
so yeah, it belongs here. Maybe good to at least referrence this wa number.
>
> Spec: 7723
>
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
>
> Changes from v1:
> - printing a debug message when sink assert a error
>
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> drivers/gpu/drm/i915/intel_psr.c | 24 +++++++++++++++++-------
> 2 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index fb106026a1f4..d3efbd654889 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4016,6 +4016,7 @@ enum {
> #define EDP_PSR_SKIP_AUX_EXIT (1<<12)
> #define EDP_PSR_TP1_TP2_SEL (0<<11)
> #define EDP_PSR_TP1_TP3_SEL (1<<11)
> +#define EDP_PSR_CRC_ENABLE (1<<10) /* BDW+ */
> #define EDP_PSR_TP2_TP3_TIME_500us (0<<8)
> #define EDP_PSR_TP2_TP3_TIME_100us (1<<8)
> #define EDP_PSR_TP2_TP3_TIME_2500us (2<<8)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index 558b08a43f9e..1920e7d03e06 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -290,6 +290,8 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
> dpcd_val |= DP_PSR_ENABLE_PSR2;
> if (dev_priv->psr.link_standby)
> dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
> + if (!dev_priv->psr.psr2_enabled && INTEL_GEN(dev_priv) >= 8)
> + dpcd_val |= DP_PSR_CRC_VERIFICATION;
> drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>
> drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> @@ -377,6 +379,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
> else
> val |= EDP_PSR_TP1_TP2_SEL;
>
> + if (INTEL_GEN(dev_priv) >= 8)
> + val |= EDP_PSR_CRC_ENABLE;
> +
> val |= I915_READ(EDP_PSR_CTL) & EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK;
> I915_WRITE(EDP_PSR_CTL, val);
> }
> @@ -602,10 +607,12 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
> * preventing other hw tracking issues now we can rely
> * on frontbuffer tracking.
> */
> - I915_WRITE(EDP_PSR_DEBUG,
> - EDP_PSR_DEBUG_MASK_MEMUP |
> - EDP_PSR_DEBUG_MASK_HPD |
> - EDP_PSR_DEBUG_MASK_LPSP);
> + u32 val = EDP_PSR_DEBUG_MASK_MEMUP | EDP_PSR_DEBUG_MASK_HPD
> + | EDP_PSR_DEBUG_MASK_LPSP;
> +
> + if (INTEL_GEN(dev_priv) >= 8)
> + val |= EDP_PSR_DEBUG_MASK_MAX_SLEEP;
> + I915_WRITE(EDP_PSR_DEBUG, val);
> }
> }
>
> @@ -1161,14 +1168,17 @@ void intel_psr_hpd_short_pulse_handle(struct intel_dp *intel_dp)
> goto dpcd_error;
> }
>
> - if (val & DP_PSR_RFB_STORAGE_ERROR) {
> - DRM_DEBUG_KMS("PSR RFB storage error, exiting PSR\n");
> + if (val & (DP_PSR_RFB_STORAGE_ERROR | DP_PSR_LINK_CRC_ERROR)) {
> + if (val & DP_PSR_RFB_STORAGE_ERROR)
> + DRM_DEBUG_KMS("PSR RFB storage error, exiting PSR\n");
> + if (val & DP_PSR_LINK_CRC_ERROR)
> + DRM_DEBUG_KMS("PSR Link CRC error, exiting PSR\n");
> intel_psr_exit(dev_priv);
> }
> /* clear status register */
> drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ERROR_STATUS, val);
>
> - /* TODO: handle other PSR/PSR2 errors */
> + /* TODO: handle PSR2 errors */
> dpcd_error:
> intel_psr_schedule_activate_work(dev_priv);
> not_enabled:
> --
> 2.17.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-04-20 21:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-18 22:43 [PATCH v2 1/9] drm/i915/psr: Move specific HSW+ WARN_ON to HSW+ function José Roberto de Souza
2018-04-18 22:43 ` [PATCH v2 2/9] drm/i915/psr: Move PSR exit specific code to hardware specific function José Roberto de Souza
2018-05-16 0:42 ` Dhinakaran Pandiyan
2018-04-18 22:43 ` [PATCH v2 3/9] drm/i915/psr: Remove intel_crtc_state parameter from disable() José Roberto de Souza
2018-04-19 11:18 ` Ville Syrjälä
2018-04-18 22:43 ` [PATCH v2 4/9] drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink José Roberto de Souza
2018-04-26 22:29 ` Dhinakaran Pandiyan
2018-04-30 23:02 ` Souza, Jose
2018-04-18 22:43 ` [PATCH v2 5/9] drm/i915/psr: Handle PSR RFB storage error José Roberto de Souza
2018-04-26 22:37 ` Dhinakaran Pandiyan
2018-04-30 23:28 ` Souza, Jose
2018-05-08 22:16 ` Dhinakaran Pandiyan
2018-04-18 22:43 ` [PATCH v2 6/9] drm/i915/psr/bdw+: Enable CRC check in the static frame on the sink side José Roberto de Souza
2018-04-20 21:16 ` Rodrigo Vivi [this message]
2018-04-25 21:02 ` Souza, Jose
2018-05-16 0:38 ` Dhinakaran Pandiyan
2018-04-18 22:43 ` [PATCH v2 7/9] drm/i915/dp: Move code to check if aux ch is busy to a function José Roberto de Souza
2018-04-26 22:51 ` Dhinakaran Pandiyan
2018-04-30 23:39 ` Souza, Jose
2018-05-08 21:29 ` Pandiyan, Dhinakaran
2018-04-18 22:43 ` [PATCH v2 8/9] drm/i915/dp: Improve intel_dp_aux_is_busy() José Roberto de Souza
2018-05-08 22:10 ` Dhinakaran Pandiyan
2018-04-18 22:43 ` [PATCH v2 9/9] drm/i915/dp: Avoid concurrent access when HW is using aux ch José Roberto de Souza
2018-04-18 22:48 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [v2,1/9] drm/i915/psr: Move specific HSW+ WARN_ON to HSW+ function Patchwork
2018-04-18 22:51 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-04-18 23:09 ` ✓ Fi.CI.BAT: success " Patchwork
2018-04-19 0:53 ` ✗ Fi.CI.IGT: failure " Patchwork
2018-04-26 0:41 ` [PATCH v2 1/9] " Dhinakaran Pandiyan
2018-04-30 22:54 ` Souza, Jose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180420211655.GF1310@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jose.souza@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).