Re: [PATCH 25/24] drm/i915/icl: fix gmbus gpio pin mapping

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Thu, May 24, 2018 at 05:36:37PM -0700, Lucas De Marchi wrote:
> On Thu, May 24, 2018 at 04:42:36PM -0700, Paulo Zanoni wrote:
> > From: Mahesh Kumar <mahesh1.kumar@intel.com>
> > 
> > ICP has GPIO pin 1/2 mapped to combo-phy ports & GPIO pins 9/10/11/12
> > mapped to tc ports[1-4].
> > This patch defines GPIOCTL registers for GPIO pins 9-12 & uses them in GPIO
> > pin mapping table.
> > 
> > Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > Cc: Madhav Chauhan <madhav.chauhan@intel.com>
> > Cc: Lucas De Marchi <lucas.demarchi@intel.com>
> > Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h   |  4 ++++
> >  drivers/gpu/drm/i915/intel_hdmi.c |  2 +-
> >  drivers/gpu/drm/i915/intel_i2c.c  | 12 ++++++------
> >  3 files changed, 11 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 452356a4af07..e48b717769b2 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -3015,6 +3015,10 @@ enum i915_power_well_id {
> >  #define GPIOF			_MMIO(0x5024)
> >  #define GPIOG			_MMIO(0x5028)
> >  #define GPIOH			_MMIO(0x502c)
> > +#define GPIOJ			_MMIO(0x5034)
> > +#define GPIOK			_MMIO(0x5038)
> > +#define GPIOL			_MMIO(0x503C)
> > +#define GPIOM			_MMIO(0x5040)
> 
> I was reviewing again this and I think again I was puzzled why the spec
> has them as 0xc5034, ...
> 
> Probably same conclusion as I had when I first reviewed this. Maybe it
> would be nice to add a comment to PCH_GPIO* saying PCH_GPIOA is used
> only for calculation the gpio base and remove the rest. I can send this
> is a separate patch, what do you think?
> 
> -------8<-------
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6953419881c4..40b9aa57078b 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7442,12 +7442,8 @@ enum {
>  #define  PORTE_HOTPLUG_SHORT_DETECT	(1 << 0)
>  #define  PORTE_HOTPLUG_LONG_DETECT	(2 << 0)
>  
> +/* Used just for calculating the gpio base for PCH */
>  #define PCH_GPIOA               _MMIO(0xc5010)
> -#define PCH_GPIOB               _MMIO(0xc5014)
> -#define PCH_GPIOC               _MMIO(0xc5018)
> -#define PCH_GPIOD               _MMIO(0xc501c)
> -#define PCH_GPIOE               _MMIO(0xc5020)
> -#define PCH_GPIOF               _MMIO(0xc5024)

Maybe just have

#define PCH_GPIO_BASE ...

and throw out the PCH_GPIO/GMBUS defines entirely?

>  
>  #define PCH_GMBUS0		_MMIO(0xc5100)
>  #define PCH_GMBUS1		_MMIO(0xc5104)
> -------8<-------
> 
> 
> Other than that,
> 
> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
> 
> >  # define GPIO_CLOCK_DIR_MASK		(1 << 0)
> >  # define GPIO_CLOCK_DIR_IN		(0 << 1)
> >  # define GPIO_CLOCK_DIR_OUT		(1 << 1)
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index 75f02a0e7d39..3db2459c79b1 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -2276,7 +2276,7 @@ static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv,
> >  		ddc_pin = bxt_port_to_ddc_pin(dev_priv, port);
> >  	else if (HAS_PCH_CNP(dev_priv))
> >  		ddc_pin = cnp_port_to_ddc_pin(dev_priv, port);
> > -	else if (IS_ICELAKE(dev_priv))
> > +	else if (HAS_PCH_ICP(dev_priv))
> >  		ddc_pin = icl_port_to_ddc_pin(dev_priv, port);
> >  	else
> >  		ddc_pin = g4x_port_to_ddc_pin(dev_priv, port);
> > diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> > index e6875509bcd9..b91e418028cb 100644
> > --- a/drivers/gpu/drm/i915/intel_i2c.c
> > +++ b/drivers/gpu/drm/i915/intel_i2c.c
> > @@ -77,12 +77,12 @@ static const struct gmbus_pin gmbus_pins_cnp[] = {
> >  };
> >  
> >  static const struct gmbus_pin gmbus_pins_icp[] = {
> > -	[GMBUS_PIN_1_BXT] = { "dpa", GPIOA },
> > -	[GMBUS_PIN_2_BXT] = { "dpb", GPIOB },
> > -	[GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOC },
> > -	[GMBUS_PIN_10_TC2_ICP] = { "tc2", GPIOD },
> > -	[GMBUS_PIN_11_TC3_ICP] = { "tc3", GPIOE },
> > -	[GMBUS_PIN_12_TC4_ICP] = { "tc4", GPIOF },
> > +	[GMBUS_PIN_1_BXT] = { "dpa", GPIOB },
> > +	[GMBUS_PIN_2_BXT] = { "dpb", GPIOC },
> > +	[GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ },
> > +	[GMBUS_PIN_10_TC2_ICP] = { "tc2", GPIOK },
> > +	[GMBUS_PIN_11_TC3_ICP] = { "tc3", GPIOL },
> > +	[GMBUS_PIN_12_TC4_ICP] = { "tc4", GPIOM },
> >  };
> >  
> >  /* pin is expected to be valid */
> > -- 
> > 2.14.3
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx