From: Daniel Scheller <d.scheller.oss@gmail.com>
To: clinton.a.taylor@intel.com
Cc: Intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH V2] drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.
Date: Sun, 17 Jun 2018 19:16:59 +0200 [thread overview]
Message-ID: <20180617191659.020cd839@lt530> (raw)
In-Reply-To: <1528926529-28676-1-git-send-email-clinton.a.taylor@intel.com>
Am Wed, 13 Jun 2018 14:48:49 -0700
schrieb clinton.a.taylor@intel.com:
> From: Clint Taylor <clinton.a.taylor@intel.com>
>
> On GLK NUC platforms the HDMI retiming buffer needs additional disabled
> time to correctly sync to a faster incoming signal.
>
> When measured on a scope the highspeed lines of the HDMI clock turn off
> for ~400uS during a normal resolution change. The HDMI retimer on the
> GLK NUC appears to require at least a full frame of quiet time before a
> new faster clock can be correctly sync'd. The worst case scenario appears
> to be 23.98Hz modes which requires a wait of 41.25ms. Add a quirk to the
> driver for GLK NUC that waits 42ms.
>
> V2: Add more devices to the quirk list
>
> Cc: Imre Deak <imre.deak@intel.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887
> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
on an ASRock J5005-ITX with a 0x3184 GLK GPU for the last five days,
HDMI signal issues when the pixel clock goes up are gone.
> ---
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/intel_ddi.c | 8 ++++++++
> drivers/gpu/drm/i915/intel_display.c | 19 +++++++++++++++++++
> 3 files changed, 28 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index be8c2f0..da196b4 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -656,6 +656,7 @@ enum intel_sbi_destination {
> #define QUIRK_BACKLIGHT_PRESENT (1<<3)
> #define QUIRK_PIN_SWIZZLED_PAGES (1<<5)
> #define QUIRK_INCREASE_T12_DELAY (1<<6)
> +#define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7)
>
> struct intel_fbdev;
> struct intel_fbc_work;
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index ca73387..bc3d012 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1791,6 +1791,9 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
> I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
> }
>
> +/* Quirk time computed based on 24fps frame time of 41.25ms */
> +#define DDI_DISABLED_QUIRK_TIME 42
> +
> void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
> enum transcoder cpu_transcoder)
> {
> @@ -1800,6 +1803,11 @@ void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
> val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
> val |= TRANS_DDI_PORT_NONE;
> I915_WRITE(reg, val);
> +
> + if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME) {
> + msleep(DDI_DISABLED_QUIRK_TIME);
> + DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n");
> + }
> }
>
> int intel_ddi_toggle_hdcp_signalling(struct intel_encoder *intel_encoder,
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 8251e18..40e0306 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -14749,6 +14749,17 @@ static void quirk_increase_t12_delay(struct drm_device *dev)
> DRM_INFO("Applying T12 delay quirk\n");
> }
>
> +/* GeminiLake NUC HDMI outputs require additional off time
> + * this allows the onboard retimer to correctly sync to signal
> + */
> +static void quirk_increase_ddi_disabled_time(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = to_i915(dev);
> +
> + dev_priv->quirks |= QUIRK_INCREASE_DDI_DISABLED_TIME;
> + DRM_INFO("Applying Increase DDI Disabled quirk\n");
> +}
> +
> struct intel_quirk {
> int device;
> int subsystem_vendor;
> @@ -14835,6 +14846,14 @@ static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
>
> /* Toshiba Satellite P50-C-18C */
> { 0x191B, 0x1179, 0xF840, quirk_increase_t12_delay },
> +
> + /* GeminiLake NUC */
> + { 0x3185, 0x8086, 0x2072, quirk_increase_ddi_disabled_time },
> + { 0x3184, 0x8086, 0x2072, quirk_increase_ddi_disabled_time },
> + /* ASRock ITX*/
> + { 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
> + { 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
> +
> };
>
> static void intel_init_quirks(struct drm_device *dev)
Best regards,
Daniel Scheller
--
https://github.com/herrnst
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-06-17 17:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 23:12 [PATCH] drm/i915/glk: Add Quirk for GLK NUC HDMI port issues clinton.a.taylor
2018-06-07 23:47 ` ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2018-06-07 23:48 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-06-08 0:06 ` ✓ Fi.CI.BAT: success " Patchwork
2018-06-08 2:46 ` ✓ Fi.CI.IGT: " Patchwork
2018-06-08 13:31 ` [PATCH] " Imre Deak
2018-06-08 15:48 ` Clint Taylor
2018-06-13 21:48 ` [PATCH V2] " clinton.a.taylor
2018-06-17 17:16 ` Daniel Scheller [this message]
2018-06-25 10:33 ` Imre Deak
2018-06-27 22:26 ` Clint Taylor
2018-06-28 10:05 ` Imre Deak
2018-06-28 18:14 ` [PATCH v3] " clinton.a.taylor
2018-06-29 9:09 ` Imre Deak
2018-07-03 20:26 ` Clint Taylor
2018-07-03 20:16 ` [PATCH v4] " clinton.a.taylor
2018-07-04 10:05 ` Imre Deak
2018-07-04 21:28 ` Daniel Scheller
2018-06-13 21:53 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/glk: Add Quirk for GLK NUC HDMI port issues. (rev2) Patchwork
2018-06-13 21:54 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-06-13 22:13 ` ✓ Fi.CI.BAT: success " Patchwork
2018-06-14 2:36 ` ✓ Fi.CI.IGT: " Patchwork
2018-06-28 18:43 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/glk: Add Quirk for GLK NUC HDMI port issues. (rev3) Patchwork
2018-06-28 18:44 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-06-28 18:59 ` ✓ Fi.CI.BAT: success " Patchwork
2018-06-28 22:05 ` ✓ Fi.CI.IGT: " Patchwork
2018-07-03 20:26 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/glk: Add Quirk for GLK NUC HDMI port issues. (rev4) Patchwork
2018-07-03 20:27 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-07-03 20:43 ` ✓ Fi.CI.BAT: success " Patchwork
2018-07-04 3:13 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180617191659.020cd839@lt530 \
--to=d.scheller.oss@gmail.com \
--cc=Intel-gfx@lists.freedesktop.org \
--cc=clinton.a.taylor@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).