[PATCH 09/10] drm/i915: Use existing power well IDs where possible

[Imre Deak <imre.deak@intel.com>]

There is no need for separate IDs for power wells on a new platform with
the same functionality as an other power well on a previous platform, we
can just reuse the ID from the previous platform. This is only possible
after the previous patches where we removed dependence on the actual
enum values.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h         |  3 ---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 12 ++++++------
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b6076f712db5..19b4eac1cc8a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1045,9 +1045,6 @@ enum i915_power_well_id {
 	SKL_DISP_PW_MISC_IO,
 	SKL_DISP_PW_1,
 	SKL_DISP_PW_2,
-	BXT_DPIO_CMN_BC,
-	ICL_DISP_PW_1,
-	ICL_DISP_PW_2,
 };
 
 #define PUNIT_REG_PWRGT_CTRL			0x60
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 56161d0dc3ca..b7acf54d8a72 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -772,7 +772,7 @@ static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
 	if (power_well->count > 0)
 		bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
 
-	power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_BC);
+	power_well = lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC);
 	if (power_well->count > 0)
 		bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
 
@@ -2456,7 +2456,7 @@ static const struct i915_power_well_desc bxt_power_wells[] = {
 		.name = "dpio-common-bc",
 		.domains = BXT_DPIO_CMN_BC_POWER_DOMAINS,
 		.ops = &bxt_dpio_cmn_power_well_ops,
-		.id = BXT_DPIO_CMN_BC,
+		.id = VLV_DISP_PW_DPIO_CMN_BC,
 		{
 			.bxt.phy = DPIO_PHY0,
 		},
@@ -2515,7 +2515,7 @@ static const struct i915_power_well_desc glk_power_wells[] = {
 		.name = "dpio-common-b",
 		.domains = GLK_DPIO_CMN_B_POWER_DOMAINS,
 		.ops = &bxt_dpio_cmn_power_well_ops,
-		.id = BXT_DPIO_CMN_BC,
+		.id = VLV_DISP_PW_DPIO_CMN_BC,
 		{
 			.bxt.phy = DPIO_PHY0,
 		},
@@ -2764,7 +2764,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 		/* Handled by the DMC firmware */
 		.domains = 0,
 		.ops = &hsw_power_well_ops,
-		.id = ICL_DISP_PW_1,
+		.id = SKL_DISP_PW_1,
 		{
 			.hsw.regs = &hsw_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_PW_1,
@@ -3584,7 +3584,7 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
 	 *    The AUX IO power wells will be enabled on demand.
 	 */
 	mutex_lock(&power_domains->lock);
-	well = lookup_power_well(dev_priv, ICL_DISP_PW_1);
+	well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
 	intel_power_well_enable(dev_priv, well);
 	mutex_unlock(&power_domains->lock);
 
@@ -3625,7 +3625,7 @@ static void icl_display_core_uninit(struct drm_i915_private *dev_priv)
 	 *    disabled at this point.
 	 */
 	mutex_lock(&power_domains->lock);
-	well = lookup_power_well(dev_priv, ICL_DISP_PW_1);
+	well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
 	intel_power_well_disable(dev_priv, well);
 	mutex_unlock(&power_domains->lock);
 
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx