intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 1/2] drm/i915/execlists: Delay updating ring register state after resume
Date: Thu, 16 Aug 2018 12:11:48 +0100	[thread overview]
Message-ID: <20180816111149.31403-1-chris@chris-wilson.co.uk> (raw)

Now that we reload both RING_HEAD and RING_TAIL when rebinding the
context, we do not need to scrub those registers immediately on resume.

v2: Handle the perma-pinned contexts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_lrc.c | 29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 841895cfb05f..3632521a5fb2 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -2775,13 +2775,14 @@ static int execlists_context_deferred_alloc(struct i915_gem_context *ctx,
 	return ret;
 }
 
-void intel_lr_context_resume(struct drm_i915_private *dev_priv)
+void intel_lr_context_resume(struct drm_i915_private *i915)
 {
 	struct intel_engine_cs *engine;
 	struct i915_gem_context *ctx;
 	enum intel_engine_id id;
 
-	/* Because we emit WA_TAIL_DWORDS there may be a disparity
+	/*
+	 * Because we emit WA_TAIL_DWORDS there may be a disparity
 	 * between our bookkeeping in ce->ring->head and ce->ring->tail and
 	 * that stored in context. As we only write new commands from
 	 * ce->ring->tail onwards, everything before that is junk. If the GPU
@@ -2791,28 +2792,20 @@ void intel_lr_context_resume(struct drm_i915_private *dev_priv)
 	 * So to avoid that we reset the context images upon resume. For
 	 * simplicity, we just zero everything out.
 	 */
-	list_for_each_entry(ctx, &dev_priv->contexts.list, link) {
-		for_each_engine(engine, dev_priv, id) {
+	list_for_each_entry(ctx, &i915->contexts.list, link) {
+		for_each_engine(engine, i915, id) {
 			struct intel_context *ce =
 				to_intel_context(ctx, engine);
-			u32 *reg;
-
-			if (!ce->state)
-				continue;
 
-			reg = i915_gem_object_pin_map(ce->state->obj,
-						      I915_MAP_WB);
-			if (WARN_ON(IS_ERR(reg)))
+			if (!ce->ring)
 				continue;
 
-			reg += LRC_STATE_PN * PAGE_SIZE / sizeof(*reg);
-			reg[CTX_RING_HEAD+1] = 0;
-			reg[CTX_RING_TAIL+1] = 0;
-
-			ce->state->obj->mm.dirty = true;
-			i915_gem_object_unpin_map(ce->state->obj);
-
 			intel_ring_reset(ce->ring, 0);
+
+			if (ce->pin_count) { /* otherwise done in context_pin */
+				ce->lrc_reg_state[CTX_RING_HEAD+1] = 0;
+				ce->lrc_reg_state[CTX_RING_TAIL+1] = 0;
+			}
 		}
 	}
 }
-- 
2.18.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2018-08-16 11:12 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-16 11:11 Chris Wilson [this message]
2018-08-16 11:11 ` [PATCH 2/2] drm/i915/execlists: Use coherent writes into the context image Chris Wilson
2018-08-16 11:54   ` Chris Wilson
2018-08-16 15:49   ` [PATCH v2] " Chris Wilson
2018-08-16 11:19 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/execlists: Delay updating ring register state after resume Patchwork
2018-08-16 11:20 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-08-16 11:36 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-08-16 16:25 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/execlists: Delay updating ring register state after resume (rev2) Patchwork
2018-08-16 16:26 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-08-16 16:43 ` ✓ Fi.CI.BAT: success " Patchwork
2018-08-16 20:09 ` ✓ Fi.CI.IGT: " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2018-09-13 17:32 [PATCH 1/2] drm/i915/execlists: Delay updating ring register state after resume Chris Wilson
2018-09-13 17:50 ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180816111149.31403-1-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).