From: Manasi Navare <manasi.d.navare@intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 13/23] drm/i915/dp: Do not enable PSR2 if DSC is enabled
Date: Thu, 23 Aug 2018 12:22:29 -0700 [thread overview]
Message-ID: <20180823192228.GA3015@intel.com> (raw)
In-Reply-To: <20180809055513.GC3343@intel.com>
Thanks Rodrigo for your review. Please find the answers below:
On Wed, Aug 08, 2018 at 10:55:13PM -0700, Rodrigo Vivi wrote:
> On Tue, Jul 31, 2018 at 02:07:09PM -0700, Manasi Navare wrote:
> > If a eDP panel supports both PSR2 and VDSC, our HW cannot
> > support both at a time. Give priority to PSR2 if a requested
> > resolution can be supported without compression else enable
> > VDSC and keep PSR2 disabled.
>
> what about PSR1 on PSR2 panels? could it be enabled with VSC?
> or is there any restriction?
>
PSR1 can be enabled simultaneously with VDSC. Its only the PSR2 with selective updates
that cannot work along with DSC.
Manasi
> >
> > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > Cc: Jani Nikula <jani.nikula@intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_psr.c | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> > index 4bd5768..fdb028f 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -441,6 +441,16 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
> > if (!dev_priv->psr.sink_psr2_support)
> > return false;
> >
> > + /*
> > + * DSC and PSR2 cannot be enabled simultaneously. If a requested
> > + * resolution requires DSC to be enabled, priority is given to DSC
> > + * over PSR2.
> > + */
> > + if (crtc_state->dsc_params.compression_enable) {
> > + DRM_DEBUG_KMS("PSR2 cannot be enabled since DSC is enabled\n");
> > + return false;
> > + }
>
> one concern I had when I first saw this patch is the order, but
> I saw that psr compute config is the last one inside dp compute config,
> so we are good...
>
> only "concern" now is about PSR1 restrictions.
>
> But if not restriction with PSR1 and VSC:
>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
>
>
> > +
> > if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
> > psr_max_h = 4096;
> > psr_max_v = 2304;
> > --
> > 2.7.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-08-23 19:19 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-31 21:06 [PATCH v2 00/23] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-07-31 21:06 ` [PATCH v2 01/23] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-07-31 22:17 ` Srivatsa, Anusha
2018-07-31 21:06 ` [PATCH v2 02/23] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-07-31 22:32 ` Srivatsa, Anusha
2018-09-11 11:22 ` Singh, Gaurav K
2018-07-31 21:06 ` [PATCH v2 03/23] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-07-31 23:33 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 04/23] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-08-17 19:21 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 05/23] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-08-17 19:20 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 06/23] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-07-31 21:07 ` [PATCH v2 07/23] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-08-17 19:31 ` Srivatsa, Anusha
2018-08-23 20:08 ` Manasi Navare
2018-08-23 19:40 ` Harry Wentland
2018-08-23 20:12 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 08/23] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-08-23 20:01 ` Harry Wentland
2018-08-28 21:12 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 09/23] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-09-10 19:41 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 10/23] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-07-31 21:16 ` Chris Wilson
2018-08-03 19:18 ` Manasi Navare
2018-08-03 19:43 ` Chris Wilson
2018-08-03 19:55 ` Manasi Navare
2018-08-23 19:58 ` Harry Wentland
2018-07-31 21:07 ` [PATCH v2 11/23] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-08-17 19:51 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 12/23] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-08-28 23:40 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 13/23] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-08-09 5:55 ` Rodrigo Vivi
2018-08-23 19:22 ` Manasi Navare [this message]
2018-08-23 20:26 ` Rodrigo Vivi
2018-08-23 20:34 ` Dhinakaran Pandiyan
2018-08-23 20:57 ` Rodrigo Vivi
2018-08-29 6:52 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 14/23] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-07-31 21:07 ` [PATCH v2 15/23] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-08-28 22:18 ` Srivatsa, Anusha
2018-08-28 22:47 ` Manasi Navare
2018-08-28 23:31 ` Manasi Navare
2018-09-05 20:04 ` Manasi Navare
2018-09-05 20:33 ` Manasi Navare
2018-09-07 2:14 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 16/23] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-09-05 21:10 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 17/23] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-08-31 18:21 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 18/23] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-08-06 19:41 ` [PATCH v3] " Manasi Navare
2018-08-06 19:50 ` Manasi Navare
2018-07-31 21:07 ` [PATCH v2 19/23] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-08-28 22:57 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 20/23] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-08-31 18:35 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 21/23] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-07-31 21:07 ` [PATCH v2 22/23] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-08-06 19:41 ` [PATCH v3] " Manasi Navare
2018-08-31 18:52 ` Srivatsa, Anusha
2018-07-31 21:07 ` [PATCH v2 23/23] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-08-31 21:42 ` Srivatsa, Anusha
2018-07-31 22:07 ` ✗ Fi.CI.BAT: failure for Display Stream Compression enabling on eDP/DP Patchwork
2018-07-31 22:08 ` Patchwork
2018-07-31 22:40 ` Patchwork
2018-08-06 19:40 ` ✗ Fi.CI.BAT: failure for Display Stream Compression enabling on eDP/DP (rev2) Patchwork
2018-08-06 20:15 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev3) Patchwork
2018-08-06 20:25 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-08-06 20:31 ` ✓ Fi.CI.BAT: success " Patchwork
2018-08-07 0:21 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180823192228.GA3015@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).