intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "José Roberto de Souza" <jose.souza@intel.com>
Cc: intel-gfx@lists.freedesktop.org, Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH v2 2/6] drm/i915: Unset reset pch handshake when PCH is not present in one place
Date: Fri, 14 Sep 2018 17:54:08 +0300	[thread overview]
Message-ID: <20180914145408.GH5565@intel.com> (raw)
In-Reply-To: <20180914141849.2046-2-jose.souza@intel.com>

On Fri, Sep 14, 2018 at 07:18:45AM -0700, José Roberto de Souza wrote:
> Right now RESET_PCH_HANDSHAKE_ENABLE is enabled all the times inside
> of intel_power_domains_init_hw() and if PCH is NOP it is unsed in
> i915_gem_init_hw().
> So making skl_pch_reset_handshake() handle both cases and calling
> it for the missing gens in intel_power_domains_init_hw().
> Ivybridge have a different register and bits but with the same
> objective so moving it too.
> 
> v2(Rodrigo):
> - handling IVYBRIDGE case inside intel_pch_reset_handshake()
> 
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_gem.c         | 12 ------------
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 19 ++++++++++++++++---
>  2 files changed, 16 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 89834ce19acd..b389e084c8c6 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -5296,18 +5296,6 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv)
>  		I915_WRITE(MI_PREDICATE_RESULT_2, IS_HSW_GT3(dev_priv) ?
>  			   LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED);
>  
> -	if (HAS_PCH_NOP(dev_priv)) {
> -		if (IS_IVYBRIDGE(dev_priv)) {
> -			u32 temp = I915_READ(GEN7_MSG_CTL);
> -			temp &= ~(WAIT_FOR_PCH_FLR_ACK | WAIT_FOR_PCH_RESET_ACK);
> -			I915_WRITE(GEN7_MSG_CTL, temp);
> -		} else if (INTEL_GEN(dev_priv) >= 7) {
> -			u32 temp = I915_READ(HSW_NDE_RSTWRN_OPT);
> -			temp &= ~RESET_PCH_HANDSHAKE_ENABLE;
> -			I915_WRITE(HSW_NDE_RSTWRN_OPT, temp);
> -		}
> -	}
> -
>  	intel_gt_workarounds_apply(dev_priv);
>  
>  	i915_gem_init_swizzling(dev_priv);
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 1bcd0e51fca1..bca1976fdb1d 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3241,10 +3241,22 @@ static void icl_mbus_init(struct drm_i915_private *dev_priv)
>  
>  static void intel_pch_reset_handshake(struct drm_i915_private *dev_priv)
>  {
> -	u32 val = I915_READ(HSW_NDE_RSTWRN_OPT);
> +	u32 val;
> +
> +	if (IS_IVYBRIDGE(dev_priv)) {
> +		if (HAS_PCH_NOP(dev_priv)) {
> +			val = I915_READ(GEN7_MSG_CTL);
> +			val &= ~(WAIT_FOR_PCH_FLR_ACK | WAIT_FOR_PCH_RESET_ACK);
> +			I915_WRITE(GEN7_MSG_CTL, val);
> +		}
> +
> +		return;
> +	}

I'd go with if-else since both sides are pretty much equal.

> +
> +	val = I915_READ(HSW_NDE_RSTWRN_OPT);
>  
>  	/* BXT don't have PCH and it requires that this bit is always unset */
> -	if (HAS_PCH_SPLIT(dev_priv))
> +	if (HAS_PCH_SPLIT(dev_priv) && !HAS_PCH_NOP(dev_priv))
>  		val |= RESET_PCH_HANDSHAKE_ENABLE;
>  	else
>  		val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> @@ -3756,7 +3768,8 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
>  		mutex_lock(&power_domains->lock);
>  		vlv_cmnlane_wa(dev_priv);
>  		mutex_unlock(&power_domains->lock);
> -	}
> +	} else if (IS_IVYBRIDGE(dev_priv) || INTEL_GEN(dev_priv) >= 7)
> +		intel_pch_reset_handshake(dev_priv);
>  
>  	/*
>  	 * Keep all power wells enabled for any dependent HW access during
> -- 
> 2.19.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-09-14 14:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-14 14:18 [PATCH v2 1/6] drm/i915/runtime_pm: Share code to enable/disable PCH reset handshake José Roberto de Souza
2018-09-14 14:18 ` [PATCH v2 2/6] drm/i915: Unset reset pch handshake when PCH is not present in one place José Roberto de Souza
2018-09-14 14:54   ` Ville Syrjälä [this message]
2018-09-14 14:18 ` [PATCH v2 3/6] drm/i915: Do not modifiy reserved bit in gens that do not have IPC José Roberto de Souza
2018-09-14 15:36   ` Rodrigo Vivi
2018-09-14 14:52 ` [PATCH v2 1/6] drm/i915/runtime_pm: Share code to enable/disable PCH reset handshake Ville Syrjälä
2018-09-14 15:37   ` Rodrigo Vivi
2018-09-17 21:28     ` Souza, Jose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180914145408.GH5565@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jose.souza@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).