intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout
Date: Tue, 13 Nov 2018 18:00:27 +0200	[thread overview]
Message-ID: <20181113160027.GC9144@intel.com> (raw)
In-Reply-To: <d4b14123-d7e4-6b99-3781-eb049138c1e9@redhat.com>

On Mon, Oct 22, 2018 at 09:41:36PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 22-10-18 16:19, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > Let's make sure the DSI port is actually on before we go
> > poking at the plane register to determine which way
> > it's rotated. Otherwise we could be looking at a plane
> > that is feeding a HDMI port for instance.
> > 
> > And in order to read the plane register we need the power
> > well to be on. Make sure that is indeed the case. We'll
> > also make sure the plane is actually enabled before we
> > trust the rotation bit to tell us the truth.
> > 
> > v2: s/intel_dsi/vlv_dsi/
> > 
> > Cc: Hans de Goede <hdegoede@redhat.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Ok, this series correctly detects the panel being upside-down
> on the BYT tablet with an upside down panel which I have, so
> this series is:
> 
> Tested-by: Hans de Goede <hdegoede@redhat.com>
> 
> I assume that most tablets like this one will have the general->rotate_180
> bit set so that the firmware setup / EFI console will show up the right way
> up. So I think going ahead with this is fine.

Thanks. Pushed patch 1 and 2, with Maarten's irc r-b for patch 1.

I might leave patch 3 to sit for a while longer.

> 
> Regards,
> 
> Hans
> 
> 
> 
> 
> > ---
> >   drivers/gpu/drm/i915/vlv_dsi.c | 56 ++++++++++++++++++++++++++--------
> >   1 file changed, 43 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> > index ee0cd5d0bf91..dcc59f653e5b 100644
> > --- a/drivers/gpu/drm/i915/vlv_dsi.c
> > +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> > @@ -1647,27 +1647,57 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
> >   	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
> >   };
> >   
> > -static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> > +static enum drm_panel_orientation
> > +vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
> >   {
> >   	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > -	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> > -	enum i9xx_plane_id i9xx_plane;
> > +	struct intel_encoder *encoder = connector->encoder;
> > +	enum intel_display_power_domain power_domain;
> > +	enum drm_panel_orientation orientation;
> > +	struct intel_plane *plane;
> > +	struct intel_crtc *crtc;
> > +	enum pipe pipe;
> >   	u32 val;
> >   
> > -	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> > -		if (connector->encoder->crtc_mask == BIT(PIPE_B))
> > -			i9xx_plane = PLANE_B;
> > -		else
> > -			i9xx_plane = PLANE_A;
> > +	if (!encoder->get_hw_state(encoder, &pipe))
> > +		return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> >   
> > -		val = I915_READ(DSPCNTR(i9xx_plane));
> > -		if (val & DISPPLANE_ROTATE_180)
> > -			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> > -	}
> > +	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > +	plane = to_intel_plane(crtc->base.primary);
> > +
> > +	power_domain = POWER_DOMAIN_PIPE(pipe);
> > +	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> > +		return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +
> > +	val = I915_READ(DSPCNTR(plane->i9xx_plane));
> > +
> > +	if (!(val & DISPLAY_PLANE_ENABLE))
> > +		orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +	else if (val & DISPPLANE_ROTATE_180)
> > +		orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> > +	else
> > +		orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> > +
> > +	intel_display_power_put(dev_priv, power_domain);
> >   
> >   	return orientation;
> >   }
> >   
> > +static enum drm_panel_orientation
> > +vlv_dsi_get_panel_orientation(struct intel_connector *connector)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > +	enum drm_panel_orientation orientation;
> > +
> > +	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> > +		orientation = vlv_dsi_get_hw_panel_orientation(connector);
> > +		if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> > +			return orientation;
> > +	}
> > +
> > +	return DRM_MODE_PANEL_ORIENTATION_NORMAL;
> > +}
> > +
> >   static void intel_dsi_add_properties(struct intel_connector *connector)
> >   {
> >   	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > @@ -1685,7 +1715,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
> >   		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
> >   
> >   		connector->base.display_info.panel_orientation =
> > -			intel_dsi_get_panel_orientation(connector);
> > +			vlv_dsi_get_panel_orientation(connector);
> >   		drm_connector_init_panel_orientation_property(
> >   				&connector->base,
> >   				connector->panel.fixed_mode->hdisplay,
> > 

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-11-13 16:00 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-19 19:59 [PATCH 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout Ville Syrjala
2018-10-19 19:59 ` [PATCH 2/3] drm/i915: Determine DSI panel orientation from VBT Ville Syrjala
2018-10-22 13:07   ` Jani Nikula
2018-10-22 13:25     ` Ville Syrjälä
2018-10-22 14:20   ` [PATCH v2 " Ville Syrjala
2018-10-22 14:52     ` Jani Nikula
2018-10-19 19:59 ` [PATCH 3/3] drm/i915: Remove the hardware readout path for DSI panel orientation Ville Syrjala
2018-10-19 20:11   ` Chris Wilson
2018-10-19 20:12     ` Chris Wilson
2018-10-22 13:09   ` Jani Nikula
2018-10-22 14:02     ` Hans de Goede
2018-10-22 14:20   ` [PATCH v2 " Ville Syrjala
2018-10-22 12:51 ` [PATCH 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout Jani Nikula
2018-10-22 13:13   ` Ville Syrjälä
2018-10-22 14:19 ` [PATCH v2 " Ville Syrjala
2018-10-22 19:41   ` Hans de Goede
2018-11-13 16:00     ` Ville Syrjälä [this message]
2018-10-22 16:26 ` ✗ Fi.CI.SPARSE: warning for series starting with [v2,1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout (rev4) Patchwork
2018-10-22 16:49 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-22 19:53 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181113160027.GC9144@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).