intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Subject: Re: [PATCH v10 20/23] i915/dp/fec: Add fec_enable to the crtc state.
Date: Tue, 27 Nov 2018 09:46:04 -0800	[thread overview]
Message-ID: <20181127174604.GI32069@intel.com> (raw)
In-Reply-To: <20181120183736.28054-21-manasi.d.navare@intel.com>

On Tue, Nov 20, 2018 at 10:37:33AM -0800, Manasi Navare wrote:
> From: Anusha Srivatsa <anusha.srivatsa@intel.com>
> 
> For DP 1.4 and above, Display Stream compression can be
> enabled only if Forward Error Correctin can be performed.
> 
> Add a crtc state for FEC. Currently, the state
> is determined by platform, DP and DSC being
> enabled. Moving forward we can use the state
> to have error correction on other scenarios too
> if needed.
> 
> v2:
> - Control compression_enable with the fec_enable
> parameter in crtc state and with intel_dp_supports_fec()
> (Ville)
> 
> - intel_dp_can_fec()/intel_dp_supports_fec()(manasi)
> 
> v3: Check for FEC support along with setting crtc state.
> 
> v4: add checks to intel_dp_source_supports_dsc.(manasi)
> - Move intel_dp_supports_fec() closer to
> intel_dp_supports_dsc() (Anusha)
> 
> v5: Move fec check to intel_dp_supports_dsc(Ville)
> 
> v6: Remove warning. rebase.
> 
> v7: change crtc state to include DP sink and fec capability
> of source.(Manasi)
> 
> v8: Set fec_enable in crtc in intel_dp_compute_config().
> 
> v9 (From Manasi):
> * Combine the !edp and !fec_support check
> * Derive dev_priv from intel_dp directly
> 
> v10 (From Manasi):
> * Rebase
> 
> Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

Manasi

> ---
>  drivers/gpu/drm/i915/intel_dp.c  | 27 ++++++++++++++++++++++-----
>  drivers/gpu/drm/i915/intel_drv.h |  3 +++
>  2 files changed, 25 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8b1694c631c7..94adbd988b91 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -545,7 +545,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
>  			dsc_slice_count =
>  				drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
>  								true);
> -		} else {
> +		} else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
>  			dsc_max_output_bpp =
>  				intel_dp_dsc_get_output_bpp(max_link_clock,
>  							    max_lanes,
> @@ -1710,14 +1710,25 @@ struct link_config_limits {
>  	int min_bpp, max_bpp;
>  };
>  
> -static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
> +static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp,
>  					 const struct intel_crtc_state *pipe_config)
>  {
>  	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>  
> -	/* FIXME: FEC needed for external DP until then reject DSC on DP */
> -	if (!intel_dp_is_edp(intel_dp))
> -		return false;
> +	return INTEL_GEN(dev_priv) >= 11 && pipe_config->cpu_transcoder != TRANSCODER_A;
> +}
> +
> +static bool intel_dp_supports_fec(struct intel_dp *intel_dp,
> +				  const struct intel_crtc_state *pipe_config)
> +{
> +	return intel_dp_source_supports_fec(intel_dp, pipe_config) &&
> +		drm_dp_sink_supports_fec(intel_dp->fec_capable);
> +}
> +
> +static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
> +					 const struct intel_crtc_state *pipe_config)
> +{
> +	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>  
>  	return INTEL_GEN(dev_priv) >= 10 &&
>  		pipe_config->cpu_transcoder != TRANSCODER_A;
> @@ -1726,6 +1737,9 @@ static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
>  static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,
>  				  const struct intel_crtc_state *pipe_config)
>  {
> +	if (!intel_dp_is_edp(intel_dp) && !pipe_config->fec_enable)
> +		return false;
> +
>  	return intel_dp_source_supports_dsc(intel_dp, pipe_config) &&
>  		drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd);
>  }
> @@ -2128,6 +2142,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
>  		return false;
>  
> +	pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) &&
> +				  intel_dp_supports_fec(intel_dp, pipe_config);
> +
>  	if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
>  		return false;
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 92e987fc3d9f..0dfddb907f10 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -945,6 +945,9 @@ struct intel_crtc_state {
>  		u8 slice_count;
>  	} dsc_params;
>  	struct drm_dsc_config dp_dsc_cfg;
> +
> +	/* Forward Error correction State */
> +	bool fec_enable;
>  };
>  
>  struct intel_crtc {
> -- 
> 2.19.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-11-27 17:46 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20 18:37 [PATCH v10 00/23] Respin of remaining DSC + FEC patches Manasi Navare
2018-11-20 18:37 ` [PATCH v10 01/23] drm/dsc: Modify DRM helper to return complete DSC color depth capabilities Manasi Navare
2018-11-27 13:47   ` Ville Syrjälä
2018-11-27 17:44   ` Srivatsa, Anusha
2018-11-20 18:37 ` [PATCH v10 02/23] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-20 18:37 ` [PATCH v10 03/23] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-20 18:37 ` [PATCH v10 04/23] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-20 18:37 ` [PATCH v10 05/23] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-20 18:37 ` [PATCH v10 06/23] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-20 18:37 ` [PATCH v10 07/23] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-20 18:37 ` [PATCH v10 08/23] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-27 13:57   ` Ville Syrjälä
2018-11-27 17:29     ` Manasi Navare
2018-11-20 18:37 ` [PATCH v10 09/23] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-20 18:37 ` [PATCH v10 10/23] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-20 18:37 ` [PATCH v10 11/23] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-20 18:37 ` [PATCH v10 12/23] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-20 18:37 ` [PATCH v10 13/23] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-20 18:37 ` [PATCH v10 14/23] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-20 18:37 ` [PATCH v10 15/23] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-20 18:37 ` [PATCH v10 16/23] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-20 18:37 ` [PATCH v10 17/23] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-20 18:37 ` [PATCH v10 18/23] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-20 18:37 ` [PATCH v10 19/23] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-20 18:37 ` [PATCH v10 20/23] i915/dp/fec: Add fec_enable to the crtc state Manasi Navare
2018-11-27 17:46   ` Manasi Navare [this message]
2018-11-20 18:37 ` [PATCH v10 21/23] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Manasi Navare
2018-11-20 18:37 ` [PATCH v10 22/23] i915/dp/fec: Configure the Forward Error Correction bits Manasi Navare
2018-11-27 17:47   ` Manasi Navare
2018-11-20 18:37 ` [PATCH v10 23/23] drm/i915/fec: Disable FEC state Manasi Navare
2018-11-20 18:58 ` ✗ Fi.CI.CHECKPATCH: warning for Respin of remaining DSC + FEC patches Patchwork
2018-11-20 19:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-20 19:29 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-21  6:54 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-29 20:57 ` [PATCH v10 00/23] " Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181127174604.GI32069@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=anusha.srivatsa@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).