Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel. [ 0.000000] Linux version 5.1.0-rc2-00601-g38d37fb (kbuild@lkp-kbuild03) (gcc version 7.3.0 (Debian 7.3.0-1)) #1 SMP Sun Mar 31 04:09:20 CST 2019 [ 0.000000] Command line: ip=::::lkp-skl-d01::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.6 branch=linux-devel/devel-hourly-2019040422 commit=38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/vmlinuz-5.1.0-rc2-00601-g38d37fb max_uptime=900 RESULT_ROOT=/result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ra mdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009916bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000009916c000-0x000000009916cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009916d000-0x00000000991b6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000991b7000-0x000000009920afff] usable [ 0.000000] BIOS-e820: [mem 0x000000009920b000-0x0000000099a0bfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000099a0c000-0x000000009f19efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009f19f000-0x000000009f3f6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009f3f7000-0x000000009f444fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009f445000-0x000000009fabefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009ffff000-0x000000009fffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000a00fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000259ffffff] usable [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] printk: bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 0.000000] tsc: Detected 3400.000 MHz processor [ 0.001452] tsc: Detected 3408.000 MHz TSC [ 0.001452] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.012057] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.017616] last_pfn = 0x25a000 max_arch_pfn = 0x400000000 [ 0.023081] MTRR default type: write-back [ 0.027071] MTRR fixed ranges enabled: [ 0.030803] 00000-9FFFF write-back [ 0.034362] A0000-BFFFF uncachable [ 0.037920] C0000-FFFFF write-protect [ 0.041738] MTRR variable ranges enabled: [ 0.045731] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.051199] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.056666] 2 base 00A8000000 mask 7FF8000000 uncachable [ 0.062134] 3 base 00A4000000 mask 7FFC000000 uncachable [ 0.067602] 4 base 00A2000000 mask 7FFE000000 uncachable [ 0.073070] 5 base 00A1800000 mask 7FFF800000 uncachable [ 0.078539] 6 disabled [ 0.081056] 7 disabled [ 0.083575] 8 disabled [ 0.086089] 9 disabled [ 0.089459] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Memory KASLR using RDRAND RDTSC... [ 0.099557] last_pfn = 0xa0000 max_arch_pfn = 0x400000000 [ 0.104936] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.110156] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.115363] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.126323] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] [ 0.131893] mpc: fcba0-fcd54 [ 0.134986] Base memory trampoline at [(____ptrval____)] 92000 size 24576 [ 0.141704] Using GB pages for direct mapping [ 0.146042] BRK [0x10f001000, 0x10f001fff] PGTABLE [ 0.150815] BRK [0x10f002000, 0x10f002fff] PGTABLE [ 0.155587] BRK [0x10f003000, 0x10f003fff] PGTABLE [ 0.160378] BRK [0x10f004000, 0x10f004fff] PGTABLE [ 0.165137] BRK [0x10f005000, 0x10f005fff] PGTABLE [ 0.170004] BRK [0x10f006000, 0x10f006fff] PGTABLE [ 0.174716] BRK [0x10f007000, 0x10f007fff] PGTABLE [ 0.179504] BRK [0x10f008000, 0x10f008fff] PGTABLE [ 0.184295] BRK [0x10f009000, 0x10f009fff] PGTABLE [ 0.189078] BRK [0x10f00a000, 0x10f00afff] PGTABLE [ 0.193845] BRK [0x10f00b000, 0x10f00bfff] PGTABLE [ 0.198623] RAMDISK: [mem 0x5cdf1000-0x7fffffff] [ 0.203202] ACPI: Early table checksum verification disabled [ 0.208841] ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL ) [ 0.214568] ACPI: XSDT 0x000000009F4170A0 0000C4 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.223074] ACPI: FACP 0x000000009F439770 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.231579] ACPI: DSDT 0x000000009F4171F8 022574 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.240083] ACPI: FACS 0x000000009FABEF80 000040 [ 0.244684] ACPI: APIC 0x000000009F439880 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.253189] ACPI: FPDT 0x000000009F439940 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.261692] ACPI: FIDT 0x000000009F439988 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.270198] ACPI: MCFG 0x000000009F439A28 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.278703] ACPI: HPET 0x000000009F439A68 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.287209] ACPI: SSDT 0x000000009F439AA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.295716] ACPI: SSDT 0x000000009F439E10 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.304223] ACPI: UEFI 0x000000009F43F1C8 000042 (v01 00000000 00000000) [ 0.312727] ACPI: LPIT 0x000000009F43F210 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.321234] ACPI: SSDT 0x000000009F43F2A8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.329737] ACPI: SSDT 0x000000009F43F4F0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.338244] ACPI: SSDT 0x000000009F4420A0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) [ 0.346748] ACPI: DBGP 0x000000009F442C88 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.355252] ACPI: DBG2 0x000000009F442CC0 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.363758] ACPI: SSDT 0x000000009F442D18 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913) [ 0.372261] ACPI: SSDT 0x000000009F443330 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.380765] ACPI: SLIC 0x000000009F4441A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.389269] ACPI: DMAR 0x000000009F444320 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.397771] ACPI: ASF! 0x000000009F4443C8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.406284] ACPI: Local APIC address 0xfee00000 [ 0.410806] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.416736] No NUMA configuration found [ 0.420449] Faking a node at [mem 0x0000000000000000-0x0000000259ffffff] [ 0.427148] NODE_DATA(0) allocated [mem 0x259fd5000-0x259ffffff] [ 0.433253] cma: Reserved 200 MiB at 0x000000024d400000 [ 0.438360] Zone ranges: [ 0.440864] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.447027] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.453189] Normal [mem 0x0000000100000000-0x0000000259ffffff] [ 0.459351] Device empty [ 0.462213] Movable zone start for each node [ 0.466466] Early memory node ranges [ 0.470022] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.476273] node 0: [mem 0x0000000000100000-0x000000009916bfff] [ 0.482520] node 0: [mem 0x00000000991b7000-0x000000009920afff] [ 0.488769] node 0: [mem 0x0000000099a0c000-0x000000009f19efff] [ 0.495017] node 0: [mem 0x000000009ffff000-0x000000009fffffff] [ 0.501267] node 0: [mem 0x0000000100000000-0x0000000259ffffff] [ 0.507588] Zeroed struct page in unavailable ranges: 5905 pages [ 0.507589] Initmem setup node 0 [mem 0x0000000000001000-0x0000000259ffffff] [ 0.520534] On node 0 totalpages: 2066671 [ 0.524525] DMA zone: 64 pages used for memmap [ 0.529122] DMA zone: 25 pages reserved [ 0.533113] DMA zone: 3995 pages, LIFO batch:0 [ 0.537786] DMA32 zone: 10086 pages used for memmap [ 0.542748] DMA32 zone: 645460 pages, LIFO batch:63 [ 0.559972] Normal zone: 22144 pages used for memmap [ 0.564934] Normal zone: 1417216 pages, LIFO batch:63 [ 0.570756] Reserving Intel graphics memory at [mem 0xa2000000-0xa3ffffff] [ 0.577634] ACPI: PM-Timer IO Port: 0x1808 [ 0.581555] ACPI: Local APIC address 0xfee00000 [ 0.586072] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.591969] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.597869] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.603772] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.609672] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.615574] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.621475] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.627376] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.633302] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.640220] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.646562] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.653776] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.660383] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.667598] ACPI: IRQ0 used by override. [ 0.671510] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.678718] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.685921] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.693125] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.700328] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.707533] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.714737] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.721940] ACPI: IRQ9 used by override. [ 0.725846] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.733050] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.740255] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.747457] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.754661] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.761864] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.769068] Using ACPI (MADT) for SMP configuration information [ 0.774971] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.780092] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) [ 0.790593] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.795544] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.800846] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.807258] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.813680] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.820102] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.826523] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.832944] PM: Registered nosave memory: [mem 0x9916c000-0x9916cfff] [ 0.839364] PM: Registered nosave memory: [mem 0x9916d000-0x991b6fff] [ 0.845788] PM: Registered nosave memory: [mem 0x9920b000-0x99a0bfff] [ 0.852208] PM: Registered nosave memory: [mem 0x9f19f000-0x9f3f6fff] [ 0.858630] PM: Registered nosave memory: [mem 0x9f3f7000-0x9f444fff] [ 0.865051] PM: Registered nosave memory: [mem 0x9f445000-0x9fabefff] [ 0.871472] PM: Registered nosave memory: [mem 0x9fabf000-0x9fffefff] [ 0.877897] PM: Registered nosave memory: [mem 0xa0000000-0xa00fffff] [ 0.884319] PM: Registered nosave memory: [mem 0xa0100000-0xa1ffffff] [ 0.890752] PM: Registered nosave memory: [mem 0xa2000000-0xa3ffffff] [ 0.897184] PM: Registered nosave memory: [mem 0xa4000000-0xf7ffffff] [ 0.903615] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.910050] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff] [ 0.916478] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.922901] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.929323] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.935745] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.942165] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.948589] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.955010] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.961432] [mem 0xa4000000-0xf7ffffff] available for PCI devices [ 0.967505] Booting paravirtualized kernel on bare hardware [ 0.973059] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.075052] random: get_random_bytes called from start_kernel+0x95/0x4cd with crng_init=0 [ 1.083059] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 1.090804] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 1.098763] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 1.105095] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 1.109360] Built 1 zonelists, mobility grouping on. Total pages: 2034352 [ 1.116201] Policy zone: Normal [ 1.119326] Kernel command line: ip=::::lkp-skl-d01::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.6 branch=linux-devel/devel-hourly-2019040422 commit=38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/vmlinuz-5.1.0-rc2-00601-g38d37fb max_uptime=900 RESULT_ROOT=/result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw [ 1.203136] sysrq: sysrq always enabled. [ 1.219554] Memory: 2087708K/8266684K available (12291K kernel code, 2323K rwdata, 4108K rodata, 2444K init, 5552K bss, 809212K reserved, 204800K cma-reserved) [ 1.233668] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 1.240140] Kernel/User page tables isolation: enabled [ 1.245268] ftrace: allocating 41346 entries in 162 pages [ 1.262468] rcu: Hierarchical RCU implementation. [ 1.267001] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 1.273770] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). [ 1.281062] Tasks RCU enabled. [ 1.284187] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.291825] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 1.300297] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 1.306509] spurious 8259A interrupt: IRQ7. [ 1.312527] Console: colour VGA+ 80x25 [ 0.000000] Linux version 5.1.0-rc2-00601-g38d37fb (kbuild@lkp-kbuild03) (gcc version 7.3.0 (Debian 7.3.0-1)) #1 SMP Sun Mar 31 04:09:20 CST 2019 [ 0.000000] Command line: ip=::::lkp-skl-d01::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.6 branch=linux-devel/devel-hourly-2019040422 commit=38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/vmlinuz-5.1.0-rc2-00601-g38d37fb max_uptime=900 RESULT_ROOT=/result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ra mdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009916bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000009916c000-0x000000009916cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009916d000-0x00000000991b6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000991b7000-0x000000009920afff] usable [ 0.000000] BIOS-e820: [mem 0x000000009920b000-0x0000000099a0bfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000099a0c000-0x000000009f19efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009f19f000-0x000000009f3f6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009f3f7000-0x000000009f444fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009f445000-0x000000009fabefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009ffff000-0x000000009fffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000a00fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000259ffffff] usable [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] printk: bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 0.000000] tsc: Detected 3400.000 MHz processor [ 0.001452] tsc: Detected 3408.000 MHz TSC [ 0.001452] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.012057] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.017616] last_pfn = 0x25a000 max_arch_pfn = 0x400000000 [ 0.023081] MTRR default type: write-back [ 0.027071] MTRR fixed ranges enabled: [ 0.030803] 00000-9FFFF write-back [ 0.034362] A0000-BFFFF uncachable [ 0.037920] C0000-FFFFF write-protect [ 0.041738] MTRR variable ranges enabled: [ 0.045731] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.051199] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.056666] 2 base 00A8000000 mask 7FF8000000 uncachable [ 0.062134] 3 base 00A4000000 mask 7FFC000000 uncachable [ 0.067602] 4 base 00A2000000 mask 7FFE000000 uncachable [ 0.073070] 5 base 00A1800000 mask 7FFF800000 uncachable [ 0.078539] 6 disabled [ 0.081056] 7 disabled [ 0.083575] 8 disabled [ 0.086089] 9 disabled [ 0.089459] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.099557] last_pfn = 0xa0000 max_arch_pfn = 0x400000000 [ 0.104936] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.110156] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.115363] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.126323] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] [ 0.131893] mpc: fcba0-fcd54 [ 0.134986] Base memory trampoline at [(____ptrval____)] 92000 size 24576 [ 0.141704] Using GB pages for direct mapping [ 0.146042] BRK [0x10f001000, 0x10f001fff] PGTABLE [ 0.150815] BRK [0x10f002000, 0x10f002fff] PGTABLE [ 0.155587] BRK [0x10f003000, 0x10f003fff] PGTABLE [ 0.160378] BRK [0x10f004000, 0x10f004fff] PGTABLE [ 0.165137] BRK [0x10f005000, 0x10f005fff] PGTABLE [ 0.170004] BRK [0x10f006000, 0x10f006fff] PGTABLE [ 0.174716] BRK [0x10f007000, 0x10f007fff] PGTABLE [ 0.179504] BRK [0x10f008000, 0x10f008fff] PGTABLE [ 0.184295] BRK [0x10f009000, 0x10f009fff] PGTABLE [ 0.189078] BRK [0x10f00a000, 0x10f00afff] PGTABLE [ 0.193845] BRK [0x10f00b000, 0x10f00bfff] PGTABLE [ 0.198623] RAMDISK: [mem 0x5cdf1000-0x7fffffff] [ 0.203202] ACPI: Early table checksum verification disabled [ 0.208841] ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL ) [ 0.214568] ACPI: XSDT 0x000000009F4170A0 0000C4 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.223074] ACPI: FACP 0x000000009F439770 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.231579] ACPI: DSDT 0x000000009F4171F8 022574 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.240083] ACPI: FACS 0x000000009FABEF80 000040 [ 0.244684] ACPI: APIC 0x000000009F439880 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.253189] ACPI: FPDT 0x000000009F439940 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.261692] ACPI: FIDT 0x000000009F439988 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.270198] ACPI: MCFG 0x000000009F439A28 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.278703] ACPI: HPET 0x000000009F439A68 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.287209] ACPI: SSDT 0x000000009F439AA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.295716] ACPI: SSDT 0x000000009F439E10 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.304223] ACPI: UEFI 0x000000009F43F1C8 000042 (v01 00000000 00000000) [ 0.312727] ACPI: LPIT 0x000000009F43F210 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.321234] ACPI: SSDT 0x000000009F43F2A8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.329737] ACPI: SSDT 0x000000009F43F4F0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.338244] ACPI: SSDT 0x000000009F4420A0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) [ 0.346748] ACPI: DBGP 0x000000009F442C88 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.355252] ACPI: DBG2 0x000000009F442CC0 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.363758] ACPI: SSDT 0x000000009F442D18 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913) [ 0.372261] ACPI: SSDT 0x000000009F443330 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.380765] ACPI: SLIC 0x000000009F4441A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.389269] ACPI: DMAR 0x000000009F444320 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.397771] ACPI: ASF! 0x000000009F4443C8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.406284] ACPI: Local APIC address 0xfee00000 [ 0.410806] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.416736] No NUMA configuration found [ 0.420449] Faking a node at [mem 0x0000000000000000-0x0000000259ffffff] [ 0.427148] NODE_DATA(0) allocated [mem 0x259fd5000-0x259ffffff] [ 0.433253] cma: Reserved 200 MiB at 0x000000024d400000 [ 0.438360] Zone ranges: [ 0.440864] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.447027] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.453189] Normal [mem 0x0000000100000000-0x0000000259ffffff] [ 0.459351] Device empty [ 0.462213] Movable zone start for each node [ 0.466466] Early memory node ranges [ 0.470022] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.476273] node 0: [mem 0x0000000000100000-0x000000009916bfff] [ 0.482520] node 0: [mem 0x00000000991b7000-0x000000009920afff] [ 0.488769] node 0: [mem 0x0000000099a0c000-0x000000009f19efff] [ 0.495017] node 0: [mem 0x000000009ffff000-0x000000009fffffff] [ 0.501267] node 0: [mem 0x0000000100000000-0x0000000259ffffff] [ 0.507588] Zeroed struct page in unavailable ranges: 5905 pages [ 0.507589] Initmem setup node 0 [mem 0x0000000000001000-0x0000000259ffffff] [ 0.520534] On node 0 totalpages: 2066671 [ 0.524525] DMA zone: 64 pages used for memmap [ 0.529122] DMA zone: 25 pages reserved [ 0.533113] DMA zone: 3995 pages, LIFO batch:0 [ 0.537786] DMA32 zone: 10086 pages used for memmap [ 0.542748] DMA32 zone: 645460 pages, LIFO batch:63 [ 0.559972] Normal zone: 22144 pages used for memmap [ 0.564934] Normal zone: 1417216 pages, LIFO batch:63 [ 0.570756] Reserving Intel graphics memory at [mem 0xa2000000-0xa3ffffff] [ 0.577634] ACPI: PM-Timer IO Port: 0x1808 [ 0.581555] ACPI: Local APIC address 0xfee00000 [ 0.586072] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.591969] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.597869] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.603772] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.609672] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.615574] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.621475] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.627376] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.633302] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.640220] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.646562] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.653776] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.660383] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.667598] ACPI: IRQ0 used by override. [ 0.671510] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.678718] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.685921] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.693125] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.700328] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.707533] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.714737] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.721940] ACPI: IRQ9 used by override. [ 0.725846] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.733050] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.740255] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.747457] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.754661] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.761864] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.769068] Using ACPI (MADT) for SMP configuration information [ 0.774971] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.780092] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) [ 0.790593] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.795544] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.800846] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.807258] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.813680] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.820102] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.826523] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.832944] PM: Registered nosave memory: [mem 0x9916c000-0x9916cfff] [ 0.839364] PM: Registered nosave memory: [mem 0x9916d000-0x991b6fff] [ 0.845788] PM: Registered nosave memory: [mem 0x9920b000-0x99a0bfff] [ 0.852208] PM: Registered nosave memory: [mem 0x9f19f000-0x9f3f6fff] [ 0.858630] PM: Registered nosave memory: [mem 0x9f3f7000-0x9f444fff] [ 0.865051] PM: Registered nosave memory: [mem 0x9f445000-0x9fabefff] [ 0.871472] PM: Registered nosave memory: [mem 0x9fabf000-0x9fffefff] [ 0.877897] PM: Registered nosave memory: [mem 0xa0000000-0xa00fffff] [ 0.884319] PM: Registered nosave memory: [mem 0xa0100000-0xa1ffffff] [ 0.890752] PM: Registered nosave memory: [mem 0xa2000000-0xa3ffffff] [ 0.897184] PM: Registered nosave memory: [mem 0xa4000000-0xf7ffffff] [ 0.903615] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.910050] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff] [ 0.916478] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.922901] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.929323] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.935745] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.942165] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.948589] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.955010] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.961432] [mem 0xa4000000-0xf7ffffff] available for PCI devices [ 0.967505] Booting paravirtualized kernel on bare hardware [ 0.973059] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.075052] random: get_random_bytes called from start_kernel+0x95/0x4cd with crng_init=0 [ 1.083059] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 1.090804] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 1.098763] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 1.105095] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 1.109360] Built 1 zonelists, mobility grouping on. Total pages: 2034352 [ 1.116201] Policy zone: Normal APPEND dmesg: /result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0/dmesg already exists [ 1.119326] Kernel command line: ip=::::lkp-skl-d01::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.6 branch=linux-devel/devel-hourly-2019040422 commit=38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/vmlinuz-5.1.0-rc2-00601-g38d37fb max_uptime=900 RESULT_ROOT=/result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw [ 1.203136] sysrq: sysrq always enabled. [ 1.219554] Memory: 2087708K/8266684K available (12291K kernel code, 2323K rwdata, 4108K rodata, 2444K init, 5552K bss, 809212K reserved, 204800K cma-reserved) [ 1.233668] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 1.240140] Kernel/User page tables isolation: enabled [ 1.245268] ftrace: allocating 41346 entries in 162 pages [ 1.262468] rcu: Hierarchical RCU implementation. [ 1.267001] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 1.273770] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). [ 1.281062] Tasks RCU enabled. [ 1.284187] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.291825] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 1.300297] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 1.306509] spurious 8259A interrupt: IRQ7. [ 1.312527] Console: colour VGA+ 80x25 [ 2.827154] printk: console [tty0] enabled [ 2.831261] printk: console [ttyS0] enabled [ 2.831261] printk: console [ttyS0] enabled [ 2.839595] printk: bootconsole [earlyser0] disabled [ 2.839595] printk: bootconsole [earlyser0] disabled [ 2.849508] ACPI: Core revision 20190215 [ 2.853818] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 2.863060] hpet clockevent registered [ 2.867003] APIC: Switch to symmetric I/O mode setup [ 2.872154] DMAR: Host address width 39 [ 2.876172] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 2.881677] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 2.890252] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 2.895750] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 2.903893] DMAR: RMRR base: 0x0000009f271000 end: 0x0000009f290fff [ 2.910351] DMAR: RMRR base: 0x000000a1800000 end: 0x000000a3ffffff [ 2.916806] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 2.923347] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 2.928935] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 2.928935] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 2.945593] DMAR-IR: Enabled IRQ remapping in xapic mode [ 2.951035] x2apic: IRQ remapping doesn't support X2APIC mode [ 2.956944] enabled ExtINT on CPU#0 [ 2.964450] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 2.971578] ENABLING IO-APIC IRQs [ 2.975042] init IO_APIC IRQs [ 2.978161] apic 2 pin 0 not connected [ 2.982150] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 2.995828] IOAPIC[0]: Set routing entry (2-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:1) [ 3.003938] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.017617] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 3.025700] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.039354] IOAPIC[0]: Set routing entry (2-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:1) [ 3.047436] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.061112] IOAPIC[0]: Set routing entry (2-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:1) [ 3.069209] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.082879] IOAPIC[0]: Set routing entry (2-5 -> 0xef -> IRQ 5 Mode:0 Active:0 Dest:1) [ 3.090962] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.104616] IOAPIC[0]: Set routing entry (2-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:1) [ 3.112700] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.126354] IOAPIC[0]: Set routing entry (2-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:1) [ 3.134438] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.148094] IOAPIC[0]: Set routing entry (2-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:1) [ 3.156178] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.169832] IOAPIC[0]: Set routing entry (2-9 -> 0xef -> IRQ 9 Mode:1 Active:0 Dest:1) [ 3.177917] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.191571] IOAPIC[0]: Set routing entry (2-10 -> 0xef -> IRQ 10 Mode:0 Active:0 Dest:1) [ 3.200445] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.214100] IOAPIC[0]: Set routing entry (2-11 -> 0xef -> IRQ 11 Mode:0 Active:0 Dest:1) [ 3.222359] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.236013] IOAPIC[0]: Set routing entry (2-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:1) [ 3.244271] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.257926] IOAPIC[0]: Set routing entry (2-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:1) [ 3.266184] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.279839] IOAPIC[0]: Set routing entry (2-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:1) [ 3.288095] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 3.301774] IOAPIC[0]: Set routing entry (2-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:1) [ 3.310043] apic 2 pin 16 not connected [ 3.314099] apic 2 pin 17 not connected [ 3.318151] apic 2 pin 18 not connected [ 3.322199] apic 2 pin 19 not connected [ 3.326246] apic 2 pin 20 not connected [ 3.330295] apic 2 pin 21 not connected [ 3.334343] apic 2 pin 22 not connected [ 3.338390] apic 2 pin 23 not connected [ 3.342437] apic 2 pin 24 not connected [ 3.346485] apic 2 pin 25 not connected [ 3.350533] apic 2 pin 26 not connected [ 3.354581] apic 2 pin 27 not connected [ 3.358629] apic 2 pin 28 not connected [ 3.362678] apic 2 pin 29 not connected [ 3.366726] apic 2 pin 30 not connected [ 3.370772] apic 2 pin 31 not connected [ 3.374821] apic 2 pin 32 not connected [ 3.378869] apic 2 pin 33 not connected [ 3.382918] apic 2 pin 34 not connected [ 3.386967] apic 2 pin 35 not connected [ 3.391015] apic 2 pin 36 not connected [ 3.395062] apic 2 pin 37 not connected [ 3.399110] apic 2 pin 38 not connected [ 3.403159] apic 2 pin 39 not connected [ 3.407207] apic 2 pin 40 not connected [ 3.411256] apic 2 pin 41 not connected [ 3.415305] apic 2 pin 42 not connected [ 3.419355] apic 2 pin 43 not connected [ 3.423402] apic 2 pin 44 not connected [ 3.427450] apic 2 pin 45 not connected [ 3.431498] apic 2 pin 46 not connected [ 3.435546] apic 2 pin 47 not connected [ 3.439595] apic 2 pin 48 not connected [ 3.443641] apic 2 pin 49 not connected [ 3.447689] apic 2 pin 50 not connected [ 3.451739] apic 2 pin 51 not connected [ 3.455786] apic 2 pin 52 not connected [ 3.459835] apic 2 pin 53 not connected [ 3.463881] apic 2 pin 54 not connected [ 3.467929] apic 2 pin 55 not connected [ 3.471978] apic 2 pin 56 not connected [ 3.476024] apic 2 pin 57 not connected [ 3.480074] apic 2 pin 58 not connected [ 3.484121] apic 2 pin 59 not connected [ 3.488167] apic 2 pin 60 not connected [ 3.492214] apic 2 pin 61 not connected [ 3.496262] apic 2 pin 62 not connected [ 3.500311] apic 2 pin 63 not connected [ 3.504357] apic 2 pin 64 not connected [ 3.508406] apic 2 pin 65 not connected [ 3.512452] apic 2 pin 66 not connected [ 3.516500] apic 2 pin 67 not connected [ 3.520550] apic 2 pin 68 not connected [ 3.524598] apic 2 pin 69 not connected [ 3.528647] apic 2 pin 70 not connected [ 3.532702] apic 2 pin 71 not connected [ 3.536756] apic 2 pin 72 not connected [ 3.540809] apic 2 pin 73 not connected [ 3.544864] apic 2 pin 74 not connected [ 3.548918] apic 2 pin 75 not connected [ 3.552973] apic 2 pin 76 not connected [ 3.557029] apic 2 pin 77 not connected [ 3.561080] apic 2 pin 78 not connected [ 3.565127] apic 2 pin 79 not connected [ 3.569175] apic 2 pin 80 not connected [ 3.573224] apic 2 pin 81 not connected [ 3.577273] apic 2 pin 82 not connected [ 3.581322] apic 2 pin 83 not connected [ 3.585372] apic 2 pin 84 not connected [ 3.589421] apic 2 pin 85 not connected [ 3.593468] apic 2 pin 86 not connected [ 3.597517] apic 2 pin 87 not connected [ 3.601567] apic 2 pin 88 not connected [ 3.605615] apic 2 pin 89 not connected [ 3.609664] apic 2 pin 90 not connected [ 3.613712] apic 2 pin 91 not connected [ 3.617761] apic 2 pin 92 not connected [ 3.621811] apic 2 pin 93 not connected [ 3.625859] apic 2 pin 94 not connected [ 3.629907] apic 2 pin 95 not connected [ 3.633954] apic 2 pin 96 not connected [ 3.638000] apic 2 pin 97 not connected [ 3.642050] apic 2 pin 98 not connected [ 3.646098] apic 2 pin 99 not connected [ 3.650146] apic 2 pin 100 not connected [ 3.654279] apic 2 pin 101 not connected [ 3.658414] apic 2 pin 102 not connected [ 3.662549] apic 2 pin 103 not connected [ 3.666682] apic 2 pin 104 not connected [ 3.670817] apic 2 pin 105 not connected [ 3.674950] apic 2 pin 106 not connected [ 3.679083] apic 2 pin 107 not connected [ 3.683216] apic 2 pin 108 not connected [ 3.687352] apic 2 pin 109 not connected [ 3.691489] apic 2 pin 110 not connected [ 3.695624] apic 2 pin 111 not connected [ 3.699761] apic 2 pin 112 not connected [ 3.703894] apic 2 pin 113 not connected [ 3.708028] apic 2 pin 114 not connected [ 3.712161] apic 2 pin 115 not connected [ 3.716295] apic 2 pin 116 not connected [ 3.720429] apic 2 pin 117 not connected [ 3.724564] apic 2 pin 118 not connected [ 3.728698] apic 2 pin 119 not connected [ 3.732994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 3.744032] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns [ 3.754733] Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=3408000) [ 3.755726] pid_max: default: 32768 minimum: 301 [ 3.756738] LSM: Security Framework initializing [ 3.758727] Yama: becoming mindful. [ 3.759729] SELinux: Initializing. [ 3.760732] *** VALIDATE SELinux *** [ 3.763406] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 3.764084] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 3.764741] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 3.765737] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 3.766816] *** VALIDATE proc *** [ 3.767755] *** VALIDATE cgroup1 *** [ 3.768726] *** VALIDATE cgroup2 *** [ 3.769743] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 3.770726] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 3.771729] mce: CPU supports 10 MCE banks [ 3.772733] mce: CPU0: Thermal monitoring enabled (TM1) [ 3.773739] process: using mwait in idle threads [ 3.774727] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 3.775726] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 3.776728] Spectre V2 : Mitigation: Full generic retpoline [ 3.777726] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 3.778726] Speculative Store Bypass: Vulnerable [ 3.779939] Freeing SMP alternatives memory: 40K [ 3.782764] Using local APIC timer interrupts. [ 3.782764] calibrating APIC timer ... [ 3.784725] ... lapic delta = 149994 [ 3.784725] ... PM-Timer delta = 357940 [ 3.784725] ... PM-Timer result ok [ 3.784725] ..... delta 149994 [ 3.784725] ..... mult: 6442193 [ 3.784725] ..... calibration result: 23999 [ 3.784725] ..... CPU clock speed is 3407.0859 MHz. [ 3.784725] ..... host bus clock speed is 23.0999 MHz. [ 3.784734] smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 3.785782] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 3.786727] ... version: 4 [ 3.787726] ... bit width: 48 [ 3.788726] ... generic registers: 4 [ 3.789726] ... value mask: 0000ffffffffffff [ 3.790726] ... max period: 00007fffffffffff [ 3.791726] ... fixed-purpose events: 3 [ 3.792726] ... event mask: 000000070000000f [ 3.793753] rcu: Hierarchical SRCU implementation. [ 3.796349] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 3.796771] smp: Bringing up secondary CPUs ... [ 3.797770] x86: Booting SMP configuration: [ 3.798727] .... node #0, CPUs: #1 [ 2.415245] masked ExtINT on CPU#1 [ 3.807293] #2 [ 2.415245] masked ExtINT on CPU#2 [ 3.812874] #3 [ 2.415245] masked ExtINT on CPU#3 [ 3.818452] #4 [ 2.415245] masked ExtINT on CPU#4 [ 3.824160] #5 [ 2.415245] masked ExtINT on CPU#5 [ 3.829793] #6 [ 2.415245] masked ExtINT on CPU#6 [ 3.835368] #7 [ 2.415245] masked ExtINT on CPU#7 [ 3.840952] smp: Brought up 1 node, 8 CPUs [ 3.841726] smpboot: Max logical packages: 1 [ 3.842726] smpboot: Total of 8 processors activated (54528.00 BogoMIPS) [ 3.877730] node 0 initialised, 1291241 pages in 33ms [ 3.883748] devtmpfs: initialized [ 3.884762] x86/mm: Memory block size: 128MB [ 3.886251] PM: Registering ACPI NVS region [mem 0x9916c000-0x9916cfff] (4096 bytes) [ 3.886727] PM: Registering ACPI NVS region [mem 0x9f445000-0x9fabefff] (6791168 bytes) [ 3.888751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 3.889733] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 3.891131] pinctrl core: initialized pinctrl subsystem [ 3.891833] PM: RTC time: 16:26:18, date: 2019-04-12 [ 3.892819] NET: Registered protocol family 16 [ 3.893892] audit: initializing netlink subsys (disabled) [ 3.895730] audit: type=2000 audit(1555086375.175:1): state=initialized audit_enabled=0 res=1 [ 3.903727] cpuidle: using governor menu [ 3.908747] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 3.915727] ACPI: bus type PCI registered [ 3.920727] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 3.926774] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 3.936727] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 3.943731] PCI: Using configuration type 1 for base access [ 3.950753] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 3.957727] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 3.964783] ACPI: Added _OSI(Module Device) [ 3.968727] ACPI: Added _OSI(Processor Device) [ 3.973726] ACPI: Added _OSI(3.0 _SCP Extensions) [ 3.977726] ACPI: Added _OSI(Processor Aggregator Device) [ 3.983726] ACPI: Added _OSI(Linux-Dell-Video) [ 3.988726] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 3.993726] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 4.020493] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 4.029372] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 4.037851] ACPI: Dynamic OEM Table Load: [ 4.041729] ACPI: SSDT 0xFFFF94D806BD2000 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 4.051045] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 4.057863] ACPI: Dynamic OEM Table Load: [ 4.062729] ACPI: SSDT 0xFFFF94D8064C1800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 4.070998] ACPI: Dynamic OEM Table Load: [ 4.075728] ACPI: SSDT 0xFFFF94D806BCF900 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913) [ 4.084933] ACPI: Dynamic OEM Table Load: [ 4.088728] ACPI: SSDT 0xFFFF94D8064B1800 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913) [ 4.097907] ACPI: Dynamic OEM Table Load: [ 4.102729] ACPI: SSDT 0xFFFF94D806BD2800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 4.111133] ACPI: Dynamic OEM Table Load: [ 4.115728] ACPI: SSDT 0xFFFF94D8064B1A00 000119 (v02 PmRef ApHwp 00003000 INTL 20120913) [ 4.124980] ACPI: Dynamic OEM Table Load: [ 4.128728] ACPI: SSDT 0xFFFF94D8064B1C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 4.141848] ACPI: Interpreter enabled [ 4.145751] ACPI: (supports S0 S3 S4 S5) [ 4.149726] ACPI: Using IOAPIC for interrupt routing [ 4.154749] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.164910] ACPI: Enabled 7 GPEs in block 00 to 7F [ 4.171438] ACPI: Power Resource [PG00] (on) [ 4.175984] ACPI: Power Resource [PG01] (on) [ 4.180805] ACPI: Power Resource [PG02] (on) [ 4.186889] ACPI: Power Resource [WRST] (off) [ 4.191938] ACPI: Power Resource [WRST] (off) [ 4.196939] ACPI: Power Resource [WRST] (off) [ 4.200935] ACPI: Power Resource [WRST] (off) [ 4.205824] ACPI: Power Resource [WRST] (off) [ 4.210942] ACPI: Power Resource [WRST] (off) [ 4.214935] ACPI: Power Resource [WRST] (off) [ 4.219935] ACPI: Power Resource [WRST] (off) [ 4.224760] ACPI: Power Resource [WRST] (off) [ 4.229935] ACPI: Power Resource [WRST] (off) [ 4.233937] ACPI: Power Resource [WRST] (off) [ 4.238938] ACPI: Power Resource [WRST] (off) [ 4.243935] ACPI: Power Resource [WRST] (off) [ 4.248934] ACPI: Power Resource [WRST] (off) [ 4.252935] ACPI: Power Resource [WRST] (off) [ 4.257884] ACPI: Power Resource [WRST] (off) [ 4.262935] ACPI: Power Resource [WRST] (off) [ 4.267937] ACPI: Power Resource [WRST] (off) [ 4.271936] ACPI: Power Resource [WRST] (off) [ 4.276815] ACPI: Power Resource [WRST] (off) [ 4.289877] ACPI: Power Resource [FN00] (off) [ 4.294783] ACPI: Power Resource [FN01] (off) [ 4.298783] ACPI: Power Resource [FN02] (off) [ 4.303781] ACPI: Power Resource [FN03] (off) [ 4.308781] ACPI: Power Resource [FN04] (off) [ 4.313488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 4.319730] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 4.329438] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 4.338726] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 4.347963] PCI host bridge to bus 0000:00 [ 4.352728] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 4.359726] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 4.366726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 4.373726] pci_bus 0000:00: root bus resource [mem 0xa4000000-0xf7ffffff window] [ 4.381726] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 4.389726] pci_bus 0000:00: root bus resource [bus 00-3e] [ 4.394731] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 [ 4.401944] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 4.407762] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.413852] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 [ 4.420734] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 4.427730] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 4.434728] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 4.440874] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 4.446744] pci 0000:00:14.0: reg 0x10: [mem 0xf7030000-0xf703ffff 64bit] [ 4.453781] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 4.459804] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 4.465743] pci 0000:00:14.2: reg 0x10: [mem 0xf704e000-0xf704efff 64bit] [ 4.472861] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 4.479748] pci 0000:00:16.0: reg 0x10: [mem 0xf704d000-0xf704dfff 64bit] [ 4.486789] pci 0000:00:16.0: PME# supported from D3hot [ 4.491819] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 4.497740] pci 0000:00:17.0: reg 0x10: [mem 0xf7048000-0xf7049fff] [ 4.504731] pci 0000:00:17.0: reg 0x14: [mem 0xf704c000-0xf704c0ff] [ 4.510731] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 4.516731] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 4.522731] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 4.528731] pci 0000:00:17.0: reg 0x24: [mem 0xf704b000-0xf704b7ff] [ 4.534759] pci 0000:00:17.0: PME# supported from D3hot [ 4.539828] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 4.546786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.552868] pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100 [ 4.558908] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 4.565739] pci 0000:00:1f.2: reg 0x10: [mem 0xf7044000-0xf7047fff] [ 4.571835] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 4.577750] pci 0000:00:1f.3: reg 0x10: [mem 0xf7040000-0xf7043fff 64bit] [ 4.584753] pci 0000:00:1f.3: reg 0x20: [mem 0xf7020000-0xf702ffff 64bit] [ 4.591768] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 4.597861] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 4.604785] pci 0000:00:1f.4: reg 0x10: [mem 0xf704a000-0xf704a0ff 64bit] [ 4.611794] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 4.617889] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 [ 4.623751] pci 0000:00:1f.6: reg 0x10: [mem 0xf7000000-0xf701ffff] [ 4.629827] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 4.636841] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.641781] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400 [ 4.647862] pci 0000:02:00.0: supports D1 D2 [ 4.652819] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 4.657777] pci_bus 0000:03: extended config space not accessible [ 4.664792] pci 0000:02:00.0: PCI bridge to [bus 03] [ 4.670653] ACPI: PCI Interrupt Link [LNKA] (IRQs *7 12) [ 4.676761] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10) [ 4.681759] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5) [ 4.686761] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *11) [ 4.692759] ACPI: PCI Interrupt Link [LNKE] (IRQs *7 11) [ 4.698759] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 10) [ 4.703759] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 5) [ 4.708759] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 12) *11 [ 4.715734] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 4.716725] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 4.730728] pci 0000:00:02.0: vgaarb: bridge control possible [ 4.735726] vgaarb: loaded [ 4.738773] SCSI subsystem initialized [ 4.742737] ACPI: bus type USB registered [ 4.746734] usbcore: registered new interface driver usbfs [ 4.752730] usbcore: registered new interface driver hub [ 4.758742] usbcore: registered new device driver usb [ 4.763737] pps_core: LinuxPPS API ver. 1 registered [ 4.768726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.777728] PTP clock support registered [ 4.784734] EDAC MC: Ver: 3.0.0 [ 4.787776] PCI: Using ACPI for IRQ routing [ 4.798477] PCI: pci_cache_line_size set to 64 bytes [ 4.803757] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 4.809726] e820: reserve RAM buffer [mem 0x9916c000-0x9bffffff] [ 4.815726] e820: reserve RAM buffer [mem 0x9920b000-0x9bffffff] [ 4.822726] e820: reserve RAM buffer [mem 0x9f19f000-0x9fffffff] [ 4.828726] e820: reserve RAM buffer [mem 0x25a000000-0x25bffffff] [ 4.834758] NetLabel: Initializing [ 4.838726] NetLabel: domain hash size = 128 [ 4.842726] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 4.848734] NetLabel: unlabeled traffic allowed by default [ 4.854883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 4.860727] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 4.868737] clocksource: Switched to clocksource tsc-early [ 4.884928] VFS: Disk quotas dquot_6.6.0 [ 4.889018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.896069] *** VALIDATE hugetlbfs *** [ 4.899995] pnp: PnP ACPI init [ 4.903345] system 00:00: [io 0x0a00-0x0a3f] has been reserved [ 4.909429] system 00:00: [io 0x0a40-0x0a7f] has been reserved [ 4.915514] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.922916] pnp 00:01: [dma 0 disabled] [ 4.926939] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 4.933660] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 4.941149] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 4.948683] system 00:04: [io 0x0680-0x069f] has been reserved [ 4.954770] system 00:04: [io 0xffff] has been reserved [ 4.960245] system 00:04: [io 0xffff] has been reserved [ 4.965720] system 00:04: [io 0xffff] has been reserved [ 4.971193] system 00:04: [io 0x1800-0x18fe] has been reserved [ 4.977274] system 00:04: [io 0x164e-0x164f] has been reserved [ 4.983358] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.990364] system 00:05: [io 0x0800-0x087f] has been reserved [ 4.996450] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.003411] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.010125] system 00:07: [io 0x1854-0x1857] has been reserved [ 5.016208] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 5.024058] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 5.030837] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 5.037615] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 5.044394] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 5.051173] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 5.057951] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 5.065078] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 5.071859] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 5.078647] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 5.085788] system 00:08: [mem 0xf7fe0000-0xf7ffffff] has been reserved [ 5.092577] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.099567] system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved [ 5.106351] system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved [ 5.113133] system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved [ 5.119914] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 5.127040] system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved [ 5.133820] system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 5.140599] system 00:09: [mem 0xfe410000-0xfe7fffff] has been reserved [ 5.147377] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.154505] system 00:0a: [io 0xff00-0xfffe] has been reserved [ 5.160591] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.168222] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 5.175003] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 5.181784] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved [ 5.188562] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.196046] pnp: PnP ACPI: found 12 devices [ 5.205709] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 5.214825] pci 0000:00:01.0: PCI bridge to [bus 01] [ 5.219956] pci 0000:02:00.0: PCI bridge to [bus 03] [ 5.225096] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 5.230492] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 5.236837] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 5.243183] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 5.250223] pci_bus 0000:00: resource 7 [mem 0xa4000000-0xf7ffffff window] [ 5.257261] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 5.264391] NET: Registered protocol family 2 [ 5.268991] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 5.277080] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 5.284611] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 5.291559] TCP: Hash tables configured (established 65536 bind 65536) [ 5.298272] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 5.304545] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 5.311282] NET: Registered protocol family 1 [ 5.315874] RPC: Registered named UNIX socket transport module. [ 5.321970] RPC: Registered udp transport module. [ 5.326848] RPC: Registered tcp transport module. [ 5.331723] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.338347] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 5.347017] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 5.360744] IOAPIC[0]: Set routing entry (2-16 -> 0xef -> IRQ 16 Mode:1 Active:1 Dest:1) [ 5.369505] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x690 took 22030 usecs [ 5.377165] PCI: CLS 0 bytes, default 64 [ 5.381273] Unpacking initramfs... [ 12.618565] Freeing initrd memory: 575548K [ 12.628753] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 12.635363] software IO TLB: mapped [mem 0x9b19f000-0x9f19f000] (64MB) [ 12.642233] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 12.650388] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.656299] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.662124] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 12.667685] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 12.673509] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 12.679170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns [ 12.689422] clocksource: Switched to clocksource tsc [ 12.699023] Initialise system trusted keyrings [ 12.703633] Key type blacklist registered [ 12.707820] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 12.715293] zbud: loaded [ 12.718248] 9p: Installing v9fs 9p2000 file system support [ 12.739002] NET: Registered protocol family 38 [ 12.743613] Key type asymmetric registered [ 12.747870] Asymmetric key parser 'x509' registered [ 12.752920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 12.760573] io scheduler mq-deadline registered [ 12.765277] io scheduler kyber registered [ 12.769491] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 12.776752] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 12.790499] IOAPIC[0]: Set routing entry (2-16 -> 0xef -> IRQ 16 Mode:1 Active:1 Dest:1) [ 12.798869] pcieport 0000:00:01.0: Signaling PME with IRQ 122 [ 12.804932] pcieport 0000:00:1c.0: Signaling PME with IRQ 123 [ 12.810878] aer 0000:00:1c.0:pcie002: AER enabled with IRQ 123 [ 12.816962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.823850] intel_idle: MWAIT substates: 0x142120 [ 12.828719] intel_idle: v0.4.1 model 0x5E [ 12.833171] intel_idle: lapic_timer_reliable_states 0xffffffff [ 12.839292] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 12.847888] ACPI: Sleep Button [SLPB] [ 12.851733] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 12.860326] ACPI: Power Button [PWRB] [ 12.864168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 12.871813] ACPI: Power Button [PWRF] [ 12.937125] thermal LNXTHERM:00: registered as thermal_zone0 [ 12.942955] ACPI: Thermal Zone [TZ00] (28 C) [ 12.947498] thermal LNXTHERM:01: registered as thermal_zone1 [ 12.953323] ACPI: Thermal Zone [TZ01] (30 C) [ 12.957805] ERST DBG: ERST support is disabled. [ 12.962671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 12.998380] Non-volatile memory driver v1.3 [ 13.002770] Linux agpgart interface v0.103 [ 13.007537] rdac: device handler registered [ 13.011956] hp_sw: device handler registered [ 13.016397] emc: device handler registered [ 13.020718] alua: device handler registered [ 13.025071] MACsec IEEE 802.1AE [ 13.028406] libphy: Fixed MDIO Bus: probed [ 13.032702] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 13.039918] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 13.045834] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 13.051831] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 13.057994] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) [ 13.071718] IOAPIC[0]: Set routing entry (2-19 -> 0xef -> IRQ 19 Mode:1 Active:1 Dest:1) [ 13.080090] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 13.310195] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 13.400361] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f4:8e:38:7c:5b:de [ 13.408522] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 13.415619] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 13.422674] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 13.431800] igb: Copyright (c) 2007-2014 Intel Corporation. [ 13.437544] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 13.445437] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 13.451550] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 13.458855] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 13.464711] usbcore: registered new interface driver catc [ 13.470276] usbcore: registered new interface driver kaweth [ 13.476013] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 13.483650] usbcore: registered new interface driver pegasus [ 13.489488] usbcore: registered new interface driver rtl8150 [ 13.495321] usbcore: registered new interface driver asix [ 13.500896] usbcore: registered new interface driver cdc_ether [ 13.506905] usbcore: registered new interface driver cdc_eem [ 13.512739] usbcore: registered new interface driver dm9601 [ 13.518481] usbcore: registered new interface driver smsc75xx [ 13.524394] usbcore: registered new interface driver smsc95xx [ 13.530306] usbcore: registered new interface driver gl620a [ 13.536045] usbcore: registered new interface driver net1080 [ 13.541873] usbcore: registered new interface driver plusb [ 13.547526] usbcore: registered new interface driver rndis_host [ 13.553613] usbcore: registered new interface driver cdc_subset [ 13.559698] usbcore: registered new interface driver zaurus [ 13.565438] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 13.573075] usbcore: registered new interface driver int51x1 [ 13.578899] usbcore: registered new interface driver ipheth [ 13.584637] usbcore: registered new interface driver sierra_net [ 13.590839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.597551] ehci-pci: EHCI PCI platform driver [ 13.602164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 13.608508] ohci-pci: OHCI PCI platform driver [ 13.613120] uhci_hcd: USB Universal Host Controller Interface driver [ 13.619764] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 13.625265] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 13.634217] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 13.643596] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 13.650690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 13.659193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.666650] usb usb1: Product: xHCI Host Controller [ 13.671690] usb usb1: Manufacturer: Linux 5.1.0-rc2-00601-g38d37fb xhci-hcd [ 13.678818] usb usb1: SerialNumber: 0000:00:14.0 [ 13.683759] hub 1-0:1.0: USB hub found [ 13.687684] hub 1-0:1.0: 16 ports detected [ 13.692734] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 13.698244] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 13.705884] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 13.712439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 [ 13.720945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.728416] usb usb2: Product: xHCI Host Controller [ 13.733465] usb usb2: Manufacturer: Linux 5.1.0-rc2-00601-g38d37fb xhci-hcd [ 13.740607] usb usb2: SerialNumber: 0000:00:14.0 [ 13.745482] hub 2-0:1.0: USB hub found [ 13.749415] hub 2-0:1.0: 10 ports detected [ 13.754056] usb: port power management may be unreliable [ 13.759747] usbcore: registered new interface driver usbserial_generic [ 13.766444] usbserial: USB Serial support registered for generic [ 13.772645] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 13.783796] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.788929] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 13.794268] mousedev: PS/2 mouse device common for all mice [ 13.800193] rtc_cmos 00:06: RTC can wake from S4 [ 13.805435] rtc_cmos 00:06: registered as rtc0 [ 13.810052] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 13.817966] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.823708] iTCO_vendor_support: vendor-support=0 [ 13.828596] intel_pstate: Intel P-state driver initializing [ 13.834861] intel_pstate: HWP enabled [ 13.838857] hidraw: raw HID events driver (C) Jiri Kosina [ 13.844507] usbcore: registered new interface driver usbhid [ 13.850241] usbhid: USB HID core driver [ 13.854270] drop_monitor: Initializing network drop monitor service [ 13.861141] Initializing XFRM netlink socket [ 13.865691] NET: Registered protocol family 10 [ 13.870491] Segment Routing with IPv6 [ 13.874357] NET: Registered protocol family 17 [ 13.879147] 9pnet: Installing 9P2000 support [ 13.883582] mpls_gso: MPLS GSO support [ 13.888412] microcode: sig=0x506e3, pf=0x2, revision=0x74 [ 13.894186] microcode: Microcode Update Driver: v2.2. [ 13.894284] ... APIC ID: 00000000 (0) [ 13.897760] ... APIC VERSION: 01060015 [ 13.897760] 0000000000000000000000000000000000000000000000000000000000000000 [ 13.897760] 0000000000000000000000000000000000000000000000000000000000000000 [ 13.897760] 0000000000000000000000000000000000000000000000000000000020000000 [ 13.929301] number of MP IRQ sources: 15. [ 13.933472] number of IO-APIC #2 registers: 120. [ 13.938250] testing the IO APIC....................... [ 13.943570] IO APIC #2...... [ 13.946609] .... register #00: 02000000 [ 13.950605] ....... : physical APIC id: 02 [ 13.955122] ....... : Delivery Type: 0 [ 13.959290] ....... : LTS : 0 [ 13.963458] .... register #01: 00770020 [ 13.967460] ....... : max redirection entries: 77 [ 13.972679] ....... : PRQ implemented: 0 [ 13.977116] ....... : IO APIC version: 20 [ 13.981643] .... register #02: 00000000 [ 13.985644] ....... : arbitration: 00 [ 13.989821] .... IRQ redirection table: [ 13.993821] IOAPIC 0: [ 13.996262] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.004336] pin01, enabled , edge , high, V(01), IRR(0), S(0), remapped, I(0000), Z(0) [ 14.012668] pin02, enabled , edge , high, V(02), IRR(0), S(0), remapped, I(0001), Z(0) [ 14.021002] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.029075] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.037164] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.042740] usb 1-5: new low-speed USB device number 2 using xhci_hcd [ 14.045235] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.059908] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.067981] pin08, enabled , edge , high, V(08), IRR(0), S(0), remapped, I(0007), Z(0) [ 14.076315] pin09, enabled , level, high, V(09), IRR(0), S(0), remapped, I(0008), Z(0) [ 14.084649] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.092721] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.100808] pin0c, enabled , edge , high, V(0C), IRR(0), S(0), remapped, I(000B), Z(0) [ 14.109142] pin0d, disabled, edge , high, V(00), IRR(0), S(0), remapped, I(0092), Z(2) [ 14.117477] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.125552] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.133624] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.141696] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.149766] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.157854] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.165931] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.174005] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.182086] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.184402] usb 1-5: New USB device found, idVendor=14dd, idProduct=1007, bcdDevice= 0.00 [ 14.190160] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.198570] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=7 [ 14.206647] pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.213953] usb 1-5: Product: D2CIM-DVUSB [ 14.213954] usb 1-5: Manufacturer: Raritan [ 14.222043] pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.226215] usb 1-5: SerialNumber: HUX46008220000007 [ 14.232873] input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:14DD:1007.0001/input/input6 [ 14.238563] pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.238587] pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.271300] pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.279374] pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(2) [ 14.289422] pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.294905] hid-generic 0003:14DD:1007.0001: input,hidraw0: USB HID v1.10 Keyboard [Raritan D2CIM-DVUSB] on usb-0000:00:14.0-5/input0 [ 14.297499] pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.313856] input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:14DD:1007.0002/input/input7 [ 14.317828] pin20, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.329491] hid-generic 0003:14DD:1007.0002: input,hidraw1: USB HID v1.10 Mouse [Raritan D2CIM-DVUSB] on usb-0000:00:14.0-5/input1 [ 14.337369] pin21, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.353878] input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:14DD:1007.0003/input/input8 [ 14.357418] pin22, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.369061] hid-generic 0003:14DD:1007.0003: input,hidraw2: USB HID v1.10 Mouse [Raritan D2CIM-DVUSB] on usb-0000:00:14.0-5/input2 [ 14.376943] pin23, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.396987] pin24, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.405060] pin25, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.413133] pin26, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.421205] pin27, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.429277] pin28, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.437362] pin29, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.445437] pin2a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.453521] pin2b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.461608] pin2c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.469693] pin2d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.477787] pin2e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.485860] pin2f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.493932] pin30, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.502005] pin31, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.510093] pin32, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.518167] pin33, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.526242] pin34, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.534315] pin35, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.542387] pin36, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.550474] pin37, disabled, edge , high, V(02), IRR(0), S(0), physical, D(00), M(2) [ 14.558548] pin38, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.566622] pin39, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.574696] pin3a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.582767] pin3b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(2) [ 14.590843] pin3c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.598918] pin3d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.606992] pin3e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.615066] pin3f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.623139] pin40, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.631227] pin41, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.639300] pin42, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.647372] pin43, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.655445] pin44, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.663517] pin45, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.671604] pin46, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.679677] pin47, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.687758] pin48, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.695843] pin49, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.703942] pin4a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.712031] pin4b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.720108] pin4c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.728182] pin4d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.736256] pin4e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.744342] pin4f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.752415] pin50, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.760488] pin51, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.768563] pin52, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.776638] pin53, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.784724] pin54, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.792797] pin55, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.800870] pin56, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.808945] pin57, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.817018] pin58, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.825091] pin59, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.833165] pin5a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.841239] pin5b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.849315] pin5c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.857389] pin5d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.865463] pin5e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.873537] pin5f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.881609] pin60, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.889682] pin61, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.897753] pin62, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.905824] pin63, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.913895] pin64, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.921970] pin65, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.930052] pin66, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.938136] pin67, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.946221] pin68, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.954310] pin69, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.962384] pin6a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.970458] pin6b, disabled, edge , high, V(08), IRR(0), S(0), physical, D(88), M(2) [ 14.978531] pin6c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.986607] pin6d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 14.994680] pin6e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.002754] pin6f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.010828] pin70, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.018899] pin71, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.026973] pin72, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.036999] pin73, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.045070] pin74, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.053144] pin75, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.061217] pin76, disabled, edge , high, V(00), IRR(0), S(0), physical, D(28), M(2) [ 15.069289] pin77, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 15.077351] IRQ to pin mappings: [ 15.080737] IRQ0 -> 0:2 [ 15.083340] IRQ1 -> 0:1 [ 15.085944] IRQ3 -> 0:3 [ 15.088547] IRQ4 -> 0:4 [ 15.091151] IRQ5 -> 0:5 [ 15.093753] IRQ6 -> 0:6 [ 15.096358] IRQ7 -> 0:7 [ 15.098961] IRQ8 -> 0:8 [ 15.101565] IRQ9 -> 0:9 [ 15.104169] IRQ10 -> 0:10 [ 15.106947] IRQ11 -> 0:11 [ 15.109723] IRQ12 -> 0:12 [ 15.112501] IRQ13 -> 0:13 [ 15.115279] IRQ14 -> 0:14 [ 15.118055] IRQ15 -> 0:15 [ 15.120833] IRQ16 -> 0:16 [ 15.123610] IRQ19 -> 0:19 [ 15.126390] .................................... done. [ 15.131696] sched_clock: Marking stable (12717446042, 2414245211)->(15513641432, -381950179) [ 15.141143] registered taskstats version 1 [ 15.145409] Loading compiled-in X.509 certificates [ 15.151370] Loaded X.509 cert 'Build time autogenerated kernel key: a2a47b913965de8afc121ec0e5d35251acabb71b' [ 15.161532] zswap: loaded using pool lzo/zbud [ 15.168947] Key type big_key registered [ 15.174521] Key type encrypted registered [ 15.178718] ima: No TPM chip found, activating TPM-bypass! [ 15.184382] ima: Allocated hash algorithm: sha1 [ 15.189084] No architecture policies found [ 15.193353] evm: Initialising EVM extended attributes: [ 15.198655] evm: security.selinux [ 15.202129] evm: security.apparmor [ 15.205691] evm: security.ima [ 15.208859] evm: security.capability [ 15.212594] evm: HMAC attrs: 0x1 [ 15.216447] PM: Magic number: 15:958:438 [ 15.220715] event_source intel_pt: hash matches [ 15.225624] rtc_cmos 00:06: setting system clock to 2019-04-12T16:26:29 UTC (1555086389) [ 18.412233] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 18.423046] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.434920] Sending DHCP requests .., OK [ 20.953032] IP-Config: Got DHCP answer from 192.168.3.2, my address is 192.168.3.76 [ 20.960951] IP-Config: Complete: [ 20.964347] device=eth0, hwaddr=f4:8e:38:7c:5b:de, ipaddr=192.168.3.76, mask=255.255.255.0, gw=192.168.3.200 [ 20.974852] host=lkp-skl-d01, domain=lkp.intel.com, nis-domain=(none) [ 20.981892] bootserver=192.168.3.200, rootserver=192.168.3.200, rootpath= [ 20.981893] nameserver0=192.168.3.200 [ 20.994585] Freeing unused decrypted memory: 2040K [ 20.999847] Freeing unused kernel image memory: 2444K [ 21.010949] Write protecting the kernel read-only data: 20480k [ 21.017449] Freeing unused kernel image memory: 2012K [ 21.022950] Freeing unused kernel image memory: 2036K [ 21.028224] rodata_test: all tests were successful [ 21.033191] Run /init as init process SELinux: Could [ 21.038904] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time. not open policy file <= /etc/selinux/targeted/policy/policy.31: No such file or directory [ 21.061250] random: systemd: uninitialized urandom read (16 bytes read) [ 21.068206] random: systemd: uninitialized urandom read (16 bytes read) [ 21.074993] random: systemd: uninitialized urandom read (16 bytes read) Set up automoun [ 21.201079] mei_me 0000:00:16.0: enabling device (0000 -> 0002) t Arbitrary Exec [ 21.208222] libata version 3.00 loaded. e System Automou [ 21.208376] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) nt Point. Mounting Hu [ 21.242838] input: PC Speaker as /devices/platform/pcspkr/input/input9 ge Pages File System... Starting Remount Root and Kernel File Systems... Starting Load Kernel Modules... Mounti [ 21.282638] mei_wdt mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02: Could not reg notif event ret=-22 ng Debug File Sy [ 21.293128] ahci 0000:00:17.0: version 3.0 stem... [ 21.297518] mei_wdt: probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 failed with error -22 Mounting RPC P [ 21.297615] IOAPIC[2]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:EF Dest:00000100 SID:F0F8 SQ:0 SVT:1) ipe File System. [ 21.322637] IOAPIC[0]: Set routing entry (2-17 -> 0xef -> IRQ 17 Mode:1 Active:1 Dest:1) .. Sta [ 21.332552] AVX2 version of gcm_enc/dec engaged. rting Journal Se [ 21.338058] AES CTR mode by8 optimization enabled rvice... [ 21.342309] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode Starting Crea [ 21.353720] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst s for the curren [ 21.366808] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10 t kernel... Mounting POSIX Message Queue File System... tem. d Debug File Sys [ 21.410226] scsi host3: ahci tem. d Huge Pages Fil [ 21.432238] ata3: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b200 irq 127 e System. Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Mounting Configuration File System... Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting udev Kernel Device Manager... Starting Raise network interfaces... Starting Preprocess NFS configuration... 0m] Started Rais [ 21.565618] random: fast init done e network interfaces. [ 21.572017] Console: switching to colour dummy device 80x25 [ 21.586528] [drm] Driver supports precise vblank timestamp query. 0m] Started udev [ 21.593053] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 21.603538] i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_27.bin failed with error -2 Coldplug all De [ 21.612790] i915 0000:00:02.0: Falling back to syfs fallback for: i915/skl_dmc_ver1_27.bin [ 21.612872] i915 0000:00:02.0: Direct firmware load for i915/skl_guc_32.0.3.bin failed with error -2 vices. [ 21.631550] i915 0000:00:02.0: Falling back to syfs fallback for: i915/skl_guc_32.0.3.bin et Network is Online. [ 21.656018] intel_rapl: Found RAPL domain package [ 21.661353] intel_rapl: Found RAPL domain core [ 21.665801] intel_rapl: Found RAPL domain uncore [ 21.665802] intel_rapl: Found RAPL domain dram Starting Flush Journal to Persistent Storage... Starting Create Volatile Files and Directories... Starting RPC bind portmap service... Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... 0m] Reached targ [ 21.765535] ata4: SATA link down (SStatus 4 SControl 300) et RPC Port Mapp [ 21.772339] ata3: SATA link down (SStatus 4 SControl 300) er. [ 21.779117] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 21.785711] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, DD11, max UDMA/133 0m] Reached targ [ 21.800601] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA et Remote File S [ 21.809615] ata1.00: configured for UDMA/133 ystems (Pre). [ 21.814635] ata2.00: configured for UDMA/133 [ 21.814873] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-75W 1A01 PQ: 0 ANSI: 5 ystems. [ 21.873594] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.879164] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 21.890894] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 21.898570] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 21.903848] sd 0:0:0:0: [sda] Write Protect is off [ 21.908651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.908660] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.908669] sd 0:0:0:0: [sda] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes) [ 21.943404] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 21.952045] cdrom: Uniform CD-ROM driver Revision: 3.20 0m] Reached target Sockets. [ 21.975670] sda: sda1 sda2 sda3 Startin [ 21.979705] sd 0:0:0:0: [sda] Attached SCSI disk g LSB: Execute the kexec -e command to reboot system... Starting Load CPU microcode update... [ 22.000763] microcode: updated to revision 0xc6, date = 2018-04-17 [ 22.019783] x86/CPU: CPU features have changed after loading microcode, but might not take effect. [ 22.028759] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. [ 22.028760] microcode: Reload completed, microcode revision: 0xc6 Starting LKP bootstrap... LKP: HOSTNAME lkp-skl-d01, MAC f4:8e:38:7c:5b:de, kernel 5.1.0-rc2-00601-g38d37fb 1, serial console /dev/ttyS0 Starting System Logging Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting LSB: Start and stop bmc-watchdog... Starting /etc/rc.local Compatibility... [ 19.682166] rc.local[475]: mkdir: cannot create directory '/var/lock/lkp-bootstrap.lock': File exists Starting Login Service... Starting LSB: Load kernel image with kexec... [ 22.208730] raid6: avx2x4 gen() 28343 MB/s [ 22.229731] raid6: avx2x4 xor() 18710 MB/s [ 22.250729] raid6: avx2x2 gen() 30984 MB/s [ 22.271729] raid6: avx2x2 xor() 20289 MB/s [ 22.292738] raid6: avx2x1 gen() 26574 MB/s [ 22.313729] raid6: avx2x1 xor() 17449 MB/s [ 22.334733] raid6: sse2x4 gen() 18976 MB/s [ 22.355731] raid6: sse2x4 xor() 11656 MB/s [ 22.376730] raid6: sse2x2 gen() 16429 MB/s [ 22.397730] raid6: sse2x2 xor() 11195 MB/s [ 22.418731] raid6: sse2x1 gen() 13187 MB/s [ 22.439731] raid6: sse2x1 xor() 9705 MB/s [ 22.444006] raid6: using algorithm avx2x2 gen() 30984 MB/s [ 22.449502] raid6: .... xor() 20289 MB/s, rmw enabled [ 22.454575] raid6: using avx2x2 recovery algorithm [ 22.467501] xor: automatically using best checksumming function avx [ 22.522869] Btrfs loaded, crc32c=crc32c-intel [ 22.527615] BTRFS: device fsid 7d6fb2e8-6465-4aad-94e7-8ffa6f47f64b devid 1 transid 7 /dev/sda1 [ 22.536754] BTRFS: device fsid 16f0bc1e-f364-4a0d-9aee-c704a346b2bc devid 1 transid 8041 /dev/sda2 [ 26.199855] Kernel tests: Boot OK! [ 26.199856] [ 29.667152] install debs round one: dpkg -i --force-confdef --force-depends /opt/deb/keyboard-configuration_1.164_all.deb [ 29.667153] [ 29.680468] /opt/deb/libpython3.5-minimal_3.5.3-1+deb9u1_amd64.deb [ 29.680469] [ 29.688922] /opt/deb/python3.5-minimal_3.5.3-1+deb9u1_amd64.deb [ 29.688922] [ 29.696985] /opt/deb/python3-minimal_3.5.3-1_amd64.deb [ 29.696985] [ 29.704415] /opt/deb/libpython3.5-stdlib_3.5.3-1+deb9u1_amd64.deb [ 29.704416] [ 29.712629] /opt/deb/python3.5_3.5.3-1+deb9u1_amd64.deb [ 29.712630] [ 29.720036] /opt/deb/libpython3-stdlib_3.5.3-1_amd64.deb [ 29.720036] [ 29.727381] /opt/deb/dh-python_2.20170125_all.deb [ 29.727381] [ 29.734141] /opt/deb/python3_3.5.3-1_amd64.deb [ 29.734142] [ 29.740753] /opt/deb/libquadmath0_6.3.0-18+deb9u1_amd64.deb [ 29.740754] [ 29.748314] /opt/deb/libblas3_3.7.0-2_amd64.deb [ 29.748315] [ 29.755101] /opt/deb/libexpat1-dev_2.2.0-2+deb9u1_amd64.deb [ 29.755102] [ 29.762674] /opt/deb/libdpkg-perl_1.18.25_all.deb [ 29.762674] [ 29.769469] /opt/deb/libglib2.0-data_2.50.3-2_all.deb [ 29.769469] [ 29.776522] /opt/deb/liblapack3_3.7.0-2_amd64.deb [ 29.776523] [ 29.783396] /opt/deb/python3-markupsafe_0.23-3_amd64.deb [ 29.783396] [ 29.790810] /opt/deb/python3-mako_1.0.6+ds1-2_all.deb [ 29.790810] [ 29.798063] /opt/deb/python3-numpy_1%3a1.12.1-3_amd64.deb [ 29.798064] [ 29.805477] /opt/deb/python3-six_1.10.0-3_all.deb [ 29.805478] [ 29.812289] /opt/deb/xkb-data_2.19-1+deb9u1_all.deb [ 29.812290] [ 29.819284] /opt/deb/gawk_1%3a4.1.4+dfsg-1_amd64.deb [ 29.819285] [ 29.826629] Selecting previously unselected package keyboard-configuration. [ 29.826629] [ 29.836215] (Reading database ... 16195 files and directories currently installed.) [ 29.836216] [ 29.846375] Preparing to unpack .../keyboard-configuration_1.164_all.deb ... [ 29.846375] [ 29.855537] Unpacking keyboard-configuration (1.164) ... [ 29.855538] [ 29.863379] Selecting previously unselected package libpython3.5-minimal:amd64. [ 29.863380] [ 29.873289] Preparing to unpack .../libpython3.5-minimal_3.5.3-1+deb9u1_amd64.deb ... [ 29.873289] [ 29.883498] Unpacking libpython3.5-minimal:amd64 (3.5.3-1+deb9u1) ... [ 29.883499] [ 29.892350] Selecting previously unselected package python3.5-minimal. [ 29.892351] [ 29.901440] Preparing to unpack .../python3.5-minimal_3.5.3-1+deb9u1_amd64.deb ... [ 29.901441] [ 29.911259] Unpacking python3.5-minimal (3.5.3-1+deb9u1) ... [ 29.911260] [ 29.919268] Selecting previously unselected package python3-minimal. [ 29.919269] [ 29.928036] Preparing to unpack .../python3-minimal_3.5.3-1_amd64.deb ... [ 29.928037] [ 29.936953] Unpacking python3-minimal (3.5.3-1) ... [ 29.936953] [ 29.944297] Selecting previously unselected package libpython3.5-stdlib:amd64. [ 29.944297] [ 29.954100] Preparing to unpack .../libpython3.5-stdlib_3.5.3-1+deb9u1_amd64.deb ... [ 29.954100] [ 29.964177] Unpacking libpython3.5-stdlib:amd64 (3.5.3-1+deb9u1) ... [ 29.964178] [ 29.972770] Selecting previously unselected package python3.5. [ 29.972772] [ 29.981027] Preparing to unpack .../python3.5_3.5.3-1+deb9u1_amd64.deb ... [ 29.981028] [ 29.990009] Unpacking python3.5 (3.5.3-1+deb9u1) ... [ 29.990009] [ 29.997413] Selecting previously unselected package libpython3-stdlib:amd64. [ 29.997414] [ 30.006886] Preparing to unpack .../libpython3-stdlib_3.5.3-1_amd64.deb ... [ 30.006887] [ 30.016055] Unpacking libpython3-stdlib:amd64 (3.5.3-1) ... [ 30.016055] [ 30.023868] Selecting previously unselected package dh-python. [ 30.023869] [ 30.032042] Preparing to unpack .../dh-python_2.20170125_all.deb ... [ 30.032042] [ 30.040384] Unpacking dh-python (2.20170125) ... [ 30.040385] [ 30.047219] Selecting previously unselected package python3. [ 30.047219] [ 30.055210] Preparing to unpack .../deb/python3_3.5.3-1_amd64.deb ... [ 30.055210] [ 30.063598] Unpacking python3 (3.5.3-1) ... [ 30.063598] [ 30.070194] Selecting previously unselected package libquadmath0:amd64. [ 30.070195] [ 30.079308] Preparing to unpack .../libquadmath0_6.3.0-18+deb9u1_amd64.deb ... [ 30.079309] [ 30.088805] Unpacking libquadmath0:amd64 (6.3.0-18+deb9u1) ... [ 30.088806] [ 30.096886] Selecting previously unselected package libblas3. [ 30.096887] [ 30.104985] Preparing to unpack .../deb/libblas3_3.7.0-2_amd64.deb ... [ 30.104986] [ 30.113473] Unpacking libblas3 (3.7.0-2) ... [ 30.113474] [ 30.120168] Selecting previously unselected package libexpat1-dev:amd64. [ 30.120168] [ 30.129394] Preparing to unpack .../libexpat1-dev_2.2.0-2+deb9u1_amd64.deb ... [ 30.129395] [ 30.138873] Unpacking libexpat1-dev:amd64 (2.2.0-2+deb9u1) ... [ 30.138874] [ 30.146980] Selecting previously unselected package libdpkg-perl. [ 30.146980] [ 30.155413] Preparing to unpack .../libdpkg-perl_1.18.25_all.deb ... [ 30.155413] [ 30.163845] Unpacking libdpkg-perl (1.18.25) ... [ 30.163845] [ 30.170731] Selecting previously unselected package libglib2.0-data. [ 30.170732] [ 30.179462] Preparing to unpack .../libglib2.0-data_2.50.3-2_all.deb ... [ 30.179462] [ 30.188279] Unpacking libglib2.0-data (2.50.3-2) ... [ 30.188280] [ 30.195436] Selecting previously unselected package liblapack3. [ 30.195437] [ 30.203624] Preparing to unpack .../liblapack3_3.7.0-2_amd64.deb ... [ 30.203624] [ 30.211982] Unpacking liblapack3 (3.7.0-2) ... [ 30.211982] [ 30.218809] Selecting previously unselected package python3-markupsafe. [ 30.218810] [ 30.227880] Preparing to unpack .../python3-markupsafe_0.23-3_amd64.deb ... [ 30.227880] [ 30.237001] Unpacking python3-markupsafe (0.23-3) ... [ 30.237002] [ 30.244338] Selecting previously unselected package python3-mako. [ 30.244338] [ 30.252832] Preparing to unpack .../python3-mako_1.0.6+ds1-2_all.deb ... [ 30.252832] [ 30.261605] Unpacking python3-mako (1.0.6+ds1-2) ... [ 30.261605] [ 30.268898] Selecting previously unselected package python3-numpy. [ 30.268899] [ 30.277549] Preparing to unpack .../python3-numpy_1%3a1.12.1-3_amd64.deb ... [ 30.277550] [ 30.286665] Unpacking python3-numpy (1:1.12.1-3) ... [ 30.286666] [ 30.293950] Selecting previously unselected package python3-six. [ 30.293951] [ 30.302299] Preparing to unpack .../python3-six_1.10.0-3_all.deb ... [ 30.302299] [ 30.310684] Unpacking python3-six (1.10.0-3) ... [ 30.310685] [ 30.317506] Selecting previously unselected package xkb-data. [ 30.317507] [ 30.325562] Preparing to unpack .../xkb-data_2.19-1+deb9u1_all.deb ... [ 30.325563] [ 30.334185] Unpacking xkb-data (2.19-1+deb9u1) ... [ 30.334186] [ 30.341163] Selecting previously unselected package gawk. [ 30.341164] [ 30.348946] Preparing to unpack .../gawk_1%3a4.1.4+dfsg-1_amd64.deb ... [ 30.348947] [ 30.357562] Unpacking gawk (1:4.1.4+dfsg-1) ... [ 30.357562] [ 30.364265] Setting up keyboard-configuration (1.164) ... [ 30.364265] [ 30.371665] Configuring keyboard-configuration [ 30.371666] [ 30.378157] ---------------------------------- [ 30.378158] [ 30.384096] [ 30.386574] Please select the layout matching the keyboard for this machine. [ 30.386574] [ 30.395112] [ 30.396932] 1. English (US) [ 30.396932] [ 30.401864] 2. English (US) - Cherokee [ 30.401865] [ 30.407861] 3. English (US) - English (Colemak) [ 30.407862] [ 30.415196] 4. English (US) - English (Dvorak alternative international no dead keys) [ 30.415197] [ 30.425284] 5. English (US) - English (Dvorak) [ 30.425285] [ 30.432372] 6. English (US) - English (Dvorak, international with dead keys) [ 30.432373] [ 30.441656] 7. English (US) - English (Macintosh) [ 30.441657] [ 30.448703] 8. English (US) - English (Programmer Dvorak) [ 30.448704] [ 30.456614] 9. English (US) - English (US, alternative international) [ 30.456615] [ 30.465643] 10. English (US) - English (US, international with dead keys) [ 30.465643] [ 30.474847] 11. English (US) - English (US, with euro on 5) [ 30.474848] [ 30.482603] 12. English (US) - English (Workman) [ 30.482603] [ 30.489952] 13. English (US) - English (Workman, international with dead keys) [ 30.489952] [ 30.499460] 14. English (US) - English (classic Dvorak) [ 30.499461] [ 30.507273] 15. English (US) - English (international AltGr dead keys) [ 30.507273] [ 30.516231] 16. English (US) - English (left handed Dvorak) [ 30.516232] [ 30.524220] 17. English (US) - English (right handed Dvorak) [ 30.524221] [ 30.532640] 18. English (US) - English (the divide/multiply keys toggle the layout) [ 30.532641] [ 30.542585] 19. English (US) - Russian (US, phonetic) [ 30.542586] [ 30.549916] 20. English (US) - Serbo-Croatian (US) [ 30.549917] [ 30.556564] 21. Other [ 30.556565] [ 30.560512] [ 30.562289] Keyboard layout: [ 30.562289] [ 30.567592] Setting up libpython3.5-minimal:amd64 (3.5.3-1+deb9u1) ... [ 30.567592] [ 30.576393] Setting up python3.5-minimal (3.5.3-1+deb9u1) ... [ 30.576394] [ 30.584254] Setting up python3-minimal (3.5.3-1) ... [ 30.584255] [ 30.591476] Setting up libquadmath0:amd64 (6.3.0-18+deb9u1) ... [ 30.591477] [ 30.599423] Setting up libdpkg-perl (1.18.25) ... [ 30.599424] [ 30.606271] Setting up libglib2.0-data (2.50.3-2) ... [ 30.606272] [ 30.613349] Setting up xkb-data (2.19-1+deb9u1) ... [ 30.613350] [ 30.620272] Setting up gawk (1:4.1.4+dfsg-1) ... [ 30.620273] [ 30.626962] Setting up dh-python (2.20170125) ... [ 30.626963] [ 30.633610] Setting up libblas3 (3.7.0-2) ... [ 30.633611] [ 30.908265] update-alternatives: using /usr/lib/libblas/libblas.so.3 to provide /usr/lib/libblas.so.3 (libblas.so.3) in auto mode [ 30.908267] [ 30.922178] Setting up libexpat1-dev:amd64 (2.2.0-2+deb9u1) ... [ 30.922178] [ 30.930134] Setting up liblapack3 (3.7.0-2) ... [ 30.930135] [ 30.952860] error: dpkg -i /opt/deb/python3_3.5.3-1_amd64.deb failed. [ 30.952862] [ 31.095355] update-alternatives: using /usr/lib/lapack/liblapack.so.3 to provide /usr/lib/liblapack.so.3 (liblapack.so.3) in auto mode [ 31.095356] [ 31.109503] Setting up python3-markupsafe (0.23-3) ... [ 31.109503] [ 31.116690] Setting up python3-mako (1.0.6+ds1-2) ... [ 31.116690] [ 31.123848] Setting up python3-numpy (1:1.12.1-3) ... [ 31.123849] [ 31.130976] Setting up python3-six (1.10.0-3) ... [ 31.130977] [ 31.138020] Setting up libpython3.5-stdlib:amd64 (3.5.3-1+deb9u1) ... [ 31.138021] [ 31.146531] Setting up python3.5 (3.5.3-1+deb9u1) ... [ 31.146531] [ 31.153720] Setting up libpython3-stdlib:amd64 (3.5.3-1) ... [ 31.153721] [ 31.161298] Setting up python3 (3.5.3-1) ... [ 31.161299] [ 31.167711] running python rtupdate hooks for python3.5... [ 31.167712] [ 31.175437] Processing triggers for mime-support (3.60) ... [ 31.175437] [ 31.183306] Processing triggers for libc-bin (2.24-11+deb9u3) ... [ 31.183306] [ 31.192306] dpkg: regarding .../deb/python3_3.5.3-1_amd64.deb containing python3, pre-dependency problem: [ 31.192307] [ 31.204188] python3 pre-depends on python3-minimal (= 3.5.3-1) [ 31.204189] [ 31.212516] python3-minimal is unpacked, but has never been configured. [ 31.212516] [ 31.220798] [ 31.223061] dpkg: warning: ignoring pre-dependency problem! [ 31.223062] [ 31.230762] debconf: unable to initialize frontend: Dialog [ 31.230763] [ 31.238668] debconf: (TERM is not set, so the dialog frontend is not usable.) [ 31.238669] [ 31.247992] debconf: falling back to frontend: Readline [ 31.247993] [ 31.255444] debconf: unable to initialize frontend: Readline [ 31.255445] [ 31.263384] debconf: (This frontend requires a controlling tty.) [ 31.263385] [ 31.271489] debconf: falling back to frontend: Teletype [ 31.271489] [ 31.279801] Use of uninitialized value $_[1] in join or string at /usr/share/perl5/Debconf/DbDriver/Stack.pm line 111. [ 31.279802] [ 31.293833] Use of uninitialized value $val in substitution (s///) at /usr/share/perl5/Debconf/Format/822.pm line 83, line 5. [ 31.293834] [ 31.496550] Use of uninitialized value $val in concatenation (.) or string at /usr/share/perl5/Debconf/Format/822.pm line 84, line 5. [ 31.496552] [ 31.511888] dpkg: libblas3: dependency problems, but configuring anyway as you requested: [ 31.511889] [ 31.522372] libblas3 depends on libgfortran3 (>= 4.3); however: [ 31.522373] [ 31.530453] Package libgfortran3 is not installed. [ 31.530453] [ 31.537530] libblas3 depends on libblas-common; however: [ 31.537531] [ 31.545069] Package libblas-common is not installed. [ 31.545069] [ 31.551703] [ 31.554609] dpkg: libexpat1-dev:amd64: dependency problems, but configuring anyway as you requested: [ 31.554609] [ 31.566184] libexpat1-dev:amd64 depends on libc6-dev | libc-dev; however: [ 31.566184] [ 31.575150] Package libc6-dev is not installed. [ 31.575151] [ 31.581908] Package libc-dev is not installed. [ 31.581909] [ 31.588034] [ 31.590766] dpkg: liblapack3: dependency problems, but configuring anyway as you requested: [ 31.590767] [ 31.601435] liblapack3 depends on libgfortran3 (>= 4.6); however: [ 31.601435] [ 31.609673] Package libgfortran3 is not installed. [ 31.609673] [ 31.616130] [ 31.618999] dpkg: python3-markupsafe: dependency problems, but configuring anyway as you requested: [ 31.618999] [ 31.630280] python3-markupsafe depends on python3 (<< 3.6). [ 31.630280] [ 31.638182] python3-markupsafe depends on python3 (>= 3.5~). [ 31.638182] [ 31.646284] python3-markupsafe depends on python3:any (>= 3.3.2-2~). [ 31.646284] [ 31.654215] [ 31.656965] dpkg: python3-mako: dependency problems, but configuring anyway as you requested: [ 31.656966] [ 31.667671] python3-mako depends on python3:any (>= 3.3.2-2~). [ 31.667672] [ 31.675086] [ 31.677884] dpkg: python3-numpy: dependency problems, but configuring anyway as you requested: [ 31.677884] [ 31.688569] python3-numpy depends on python3 (<< 3.6). [ 31.688569] [ 31.695957] python3-numpy depends on python3 (>= 3.5~). [ 31.695958] [ 31.703320] python3-numpy depends on python3.5:any. [ 31.703321] [ 31.710478] python3-numpy depends on python3:any (>= 3.4~). [ 31.710478] [ 31.717633] [ 31.720387] dpkg: python3-six: dependency problems, but configuring anyway as you requested: [ 31.720388] [ 31.731028] python3-six depends on python3:any (>= 3.4~). [ 31.731028] [ 31.738004] [ 31.740967] dpkg: libpython3.5-stdlib:amd64: dependency problems, but configuring anyway as you requested: [ 31.740968] [ 31.753028] libpython3.5-stdlib:amd64 depends on libmpdec2; however: [ 31.753029] [ 31.761498] Package libmpdec2 is not installed. [ 31.761498] [ 31.767709] [ 31.770072] dpkg-query: package 'libglib2.0-dev' is not installed [ 31.770073] [ 31.778590] Use dpkg --info (= dpkg-deb --info) to examine archive files, [ 31.778590] [ 31.787892] and dpkg --contents (= dpkg-deb --contents) to list their contents. [ 31.787892] [ 31.797253] Traceback (most recent call last): [ 31.797253] [ 31.803944] File "/usr/bin/py3clean", line 210, in [ 31.803944] [ 31.811351] main() [ 31.811352] [ 31.815885] File "/usr/bin/py3clean", line 196, in main [ 31.815886] [ 31.823509] pfiles = set(dpf.from_package(options.package)) [ 31.823510] [ 31.832004] File "/usr/share/python3/debpython/files.py", line 53, in from_package [ 31.832005] [ 31.842195] raise Exception("cannot get content of %s" % package_name) [ 31.842196] [ 31.851300] Exception: cannot get content of libglib2.0-dev [ 31.851301] [ 31.859114] error running python rtupdate hook libglib2.0-dev [ 31.859115] [ 31.867115] dpkg: error processing package python3 (--install): [ 31.867116] [ 31.875640] subprocess installed post-installation script returned error exit status 4 [ 31.875640] [ 31.885684] Errors were encountered while processing: [ 31.885685] [ 31.892334] python3 [ 31.892335] [ 31.896456] handle /opt/deb/keep-deb.lkp... [ 31.896457] [ 31.903656] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/gawk_1%3a4.1.4+dfsg-1_amd64.deb [ 31.903656] [ 31.916724] (Reading database ... 18431 files and directories currently installed.) [ 31.916725] [ 31.926671] Preparing to unpack .../gawk_1%3a4.1.4+dfsg-1_amd64.deb ... [ 31.926672] [ 31.935559] Unpacking gawk (1:4.1.4+dfsg-1) over (1:4.1.4+dfsg-1) ... [ 31.935560] [ 31.944063] Setting up gawk (1:4.1.4+dfsg-1) ... [ 31.944064] [ 31.950652] handle /opt/deb/keep-deb.piglit... [ 31.950652] [ 31.958189] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/keyboard-configuration_1.164_all.deb [ 31.958190] [ 31.971689] (Reading database ... 18431 files and directories currently installed.) [ 31.971690] [ 31.981706] Preparing to unpack .../keyboard-configuration_1.164_all.deb ... [ 31.981706] [ 31.991100] Unpacking keyboard-configuration (1.164) over (1.164) ... [ 31.991101] [ 31.999681] Setting up keyboard-configuration (1.164) ... [ 31.999682] [ 32.008364] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3.5-minimal_3.5.3-1+deb9u1_amd64.deb [ 32.008365] [ 32.022715] (Reading database ... 18431 files and directories currently installed.) [ 32.022715] [ 32.032938] Preparing to unpack .../libpython3.5-minimal_3.5.3-1+deb9u1_amd64.deb ... [ 32.032939] [ 32.043460] Unpacking libpython3.5-minimal:amd64 (3.5.3-1+deb9u1) over (3.5.3-1+deb9u1) ... [ 32.043461] [ 32.054177] Setting up libpython3.5-minimal:amd64 (3.5.3-1+deb9u1) ... [ 32.054178] [ 32.063949] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3.5-minimal_3.5.3-1+deb9u1_amd64.deb [ 32.063949] [ 32.077998] (Reading database ... 18431 files and directories currently installed.) [ 32.077998] [ 32.088228] Preparing to unpack .../python3.5-minimal_3.5.3-1+deb9u1_amd64.deb ... [ 32.088228] [ 32.098347] Unpacking python3.5-minimal (3.5.3-1+deb9u1) over (3.5.3-1+deb9u1) ... [ 32.098348] [ 32.108173] Setting up python3.5-minimal (3.5.3-1+deb9u1) ... [ 32.108174] [ 32.116973] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3-minimal_3.5.3-1_amd64.deb [ 32.116974] [ 32.130229] (Reading database ... 18431 files and directories currently installed.) [ 32.130230] [ 32.140289] Preparing to unpack .../python3-minimal_3.5.3-1_amd64.deb ... [ 32.140289] [ 32.149418] Unpacking python3-minimal (3.5.3-1) over (3.5.3-1) ... [ 32.149419] [ 32.157651] Setting up python3-minimal (3.5.3-1) ... [ 32.157652] [ 32.165839] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3.5-stdlib_3.5.3-1+deb9u1_amd64.deb [ 32.165839] [ 32.180032] (Reading database ... 18431 files and directories currently installed.) [ 32.180033] [ 32.190273] Preparing to unpack .../libpython3.5-stdlib_3.5.3-1+deb9u1_amd64.deb ... [ 32.190274] [ 32.200674] Unpacking libpython3.5-stdlib:amd64 (3.5.3-1+deb9u1) over (3.5.3-1+deb9u1) ... [ 32.200675] [ 32.211290] Setting up libpython3.5-stdlib:amd64 (3.5.3-1+deb9u1) ... [ 32.211291] [ 32.220877] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3.5_3.5.3-1+deb9u1_amd64.deb [ 32.220878] [ 32.234240] (Reading database ... 18431 files and directories currently installed.) [ 32.234241] [ 32.244336] Preparing to unpack .../python3.5_3.5.3-1+deb9u1_amd64.deb ... [ 32.244336] [ 32.253627] Unpacking python3.5 (3.5.3-1+deb9u1) over (3.5.3-1+deb9u1) ... [ 32.253627] [ 32.262554] Setting up python3.5 (3.5.3-1+deb9u1) ... [ 32.262555] [ 32.269820] Processing triggers for mime-support (3.60) ... [ 32.269821] [ 32.278514] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/libpython3-stdlib_3.5.3-1_amd64.deb [ 32.278514] [ 32.291951] (Reading database ... 18431 files and directories currently installed.) [ 32.291952] [ 32.302058] Preparing to unpack .../libpython3-stdlib_3.5.3-1_amd64.deb ... [ 32.302059] [ 32.311467] Unpacking libpython3-stdlib:amd64 (3.5.3-1) over (3.5.3-1) ... [ 32.311467] [ 32.320520] Setting up libpython3-stdlib:amd64 (3.5.3-1) ... [ 32.320520] [ 32.329173] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/dh-python_2.20170125_all.deb [ 32.329173] [ 32.342008] (Reading database ... 18431 files and directories currently installed.) [ 32.342008] [ 32.352017] Preparing to unpack .../dh-python_2.20170125_all.deb ... [ 32.352018] [ 32.360616] Unpacking dh-python (2.20170125) over (2.20170125) ... [ 32.360616] [ 32.368873] Setting up dh-python (2.20170125) ... [ 32.368874] [ 32.376546] install debs round two: dpkg -i --force-confdef --force-depends /opt/deb/python3_3.5.3-1_amd64.deb [ 32.376546] [ 32.389120] (Reading database ... 18431 files and directories currently installed.) [ 32.389121] [ 32.399142] Preparing to unpack .../deb/python3_3.5.3-1_amd64.deb ... [ 32.399143] [ 32.407853] running python pre-rtupdate hooks for python3.5... [ 32.407854] [ 32.415873] Unpacking python3 (3.5.3-1) over (3.5.3-1) ... [ 32.415873] [ 32.423274] Setting up python3 (3.5.3-1) ... [ 32.423274] [ 32.429687] running python rtupdate hooks for python3.5... [ 32.429688] [ 32.437453] dpkg-query: package 'libglib2.0-dev' is not installed [ 32.437453] [ 32.445980] Use dpkg --info (= dpkg-deb --info) to examine archive files, [ 32.445981] [ 32.455298] and dpkg --contents (= dpkg-deb --contents) to list their contents. [ 32.455299] [ 32.464579] Traceback (most recent call last): [ 32.464579] [ 32.471251] File "/usr/bin/py3clean", line 210, in [ 32.471252] [ 32.478664] main() [ 32.478665] [ 32.483176] File "/usr/bin/py3clean", line 196, in main [ 32.483177] [ 32.490826] pfiles = set(dpf.from_package(options.package)) [ 32.490827] [ 32.499331] File "/usr/share/python3/debpython/files.py", line 53, in from_package [ 32.499332] [ 32.509494] raise Exception("cannot get content of %s" % package_name) [ 32.509494] [ 32.518521] Exception: cannot get content of libglib2.0-dev [ 32.518522] [ 32.526311] error running python rtupdate hook libglib2.0-dev [ 32.526312] [ 32.534312] dpkg: error processing package python3 (--install): [ 32.534313] [ 32.542892] subprocess installed post-installation script returned error exit status 4 [ 32.542892] [ 32.553026] Errors were encountered while processing: [ 32.553027] [ 32.559673] python3 [ 32.559674] [ 34.643617] 5 Apr 12:32:18 ntpdate[1540]: step time server 192.168.1.1 offset -618870.294047 sec [ 34.643618] [ 34.655640] BTRFS info (device sda2): disk space caching is enabled [ 34.661921] BTRFS info (device sda2): has skinny extents [ 34.710086] /lkp/lkp/src/bin/run-lkp [ 34.710090] Starting Preprocess NFS configuration... Starting Notify NFS peers of a restart... Starting NFS status monitor for NFSv2/3 locking.... [ 35.038916] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.050952] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.062837] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.074667] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.086714] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.098538] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.110363] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.122375] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.134214] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.146056] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.158057] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.169937] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.174355] RESULT_ROOT=/result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0 [ 35.174356] [ 35.181780] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.197665] job=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml [ 35.197666] [ 35.209019] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.222351] mount.nfs: try 1 time... [ 35.222351] [ 35.223426] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.237409] run-job /lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml [ 35.237410] [ 35.238931] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.278943] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.290781] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.302608] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.314607] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.326436] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.338259] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.350256] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.362091] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.373932] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.385922] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.397766] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.409611] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.421610] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.433436] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.445443] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.457437] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.469262] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.481087] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.493087] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.504912] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.516756] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.528767] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.540587] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.552409] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.564404] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.576228] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.588053] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back [ 35.600058] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 35.611899] x86/PAT: bmc-watchdog:1654 map pfn expected mapping type uncached-minus for [mem 0x9f417000-0x9f417fff], got write-back [ 36.042077] [ 38.811615] /usr/bin/wget -q --timeout=1800 --tries=1 --local-encoding=UTF-8 http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml&job_state=running -O /dev/null [ 38.811616] [ 38.839460] target ucode: [ 38.839461] [ 38.843670] [ 38.845553] X.Org X Server 1.19.2 [ 38.845553] [ 38.850694] Release Date: 2017-03-02 [ 38.850695] [ 38.856266] X Protocol Version 11, Revision 0 [ 38.856266] [ 38.862976] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian [ 38.862977] [ 38.872685] Current Operating System: Linux lkp-skl-d01 5.1.0-rc2-00601-g38d37fb #1 SMP Sun Mar 31 04:09:20 CST 2019 x86_64 [ 38.872686] [ 43.367612] Kernel command line: ip=::::lkp-skl-d01::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.6 branch=linux-devel/devel-hourly-2019040422 commit=38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/vmlinuz-5.1.0-rc2-00601-g38d37fb max_uptime=900 RESULT_ROOT=/result/piglit/quick-189/lkp-skl-d01/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.6/gcc-7/38d37fb30c6d08c3e76d3f40df5e3a9ac77224d7/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=t [ 43.367614] [ 45.177583] Build Date: 03 November 2018 03:09:11AM [ 45.177585] [ 45.672884] random: crng init done [ 45.676284] random: 7 urandom warning(s) missed due to ratelimiting [ 46.078157] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support) [ 46.078159] [ 46.087167] Current version of pixman: 0.34.0 [ 46.087167] [ 46.093734] Before reporting problems, check http://wiki.x.org [ 46.093734] [ 46.101841] to make sure that you have the latest version. [ 46.101842] [ 46.222840] Markers: (--) probed, (**) from config file, (==) default setting, [ 46.222840] [ 46.232402] (++) from command line, (!!) notice, (II) informational, [ 46.232403] [ 46.241276] (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 46.241277] [ 46.325689] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 5 12:32:20 2019 [ 46.325689] [ 46.335517] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 46.335517] [ 46.344053] (EE) [ 46.344053] [ 46.347763] Fatal server error: [ 46.347764] [ 46.352889] (EE) no screens found(EE) [ 46.352890] [ 46.358203] (EE) [ 46.358204] [ 46.362380] Please consult the The X.Org Foundation support [ 46.362381] [ 46.369909] at http://wiki.x.org [ 46.369910] [ 46.374964] for help. [ 46.374964] [ 47.103674] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 47.103675] [ 47.114382] (EE) [ 47.114382] [ 47.118591] (EE) Server terminated with error (1). Closing log file. [ 47.118592] [ 51.044437] xinit: giving up [ 51.044442] [ 51.052796] xinit: unable to connect to X server: Connection refused [ 51.052800] [ 51.062006] xinit: server error [ 51.062009] [ 57.096325] /usr/bin/wget -q --timeout=1800 --tries=1 --local-encoding=UTF-8 http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/jobs/scheduled/lkp-skl-d01/piglit-quick-189-debian-x86_64-2018-04-03.cgz-38d37fb30c6d08c3e76d3-20190405-82055-1mt16zb-0.yaml&job_state=post_run -O /dev/null [ 57.096327] [ 57.124541] kill 1629 vmstat --timestamp -n 10 [ 57.124541] [ 57.131094] kill 1627 dmesg --follow --decode [ 57.131094] [ 57.137930] wait for background processes: 1636 1632 oom-killer meminfo [ 57.137930] Stopping NFS status monitor for NFSv2/3 locking.... Unmounting RPC Pipe File System... Stopping OpenBSD Secure Shell server... Stopping Regular background program processing daemon... Stopping LSB: Start and stop bmc-watchdog... Stopping System Logging Service... Stopping D-Bus System Message Bus... Stopping Permit User Sessions... Stopping LSB: Load kernel image with kexec... Stopping Login Service... Unmounting /inn/result... Stopping LSB: Execute the kexec -e command to reboot system... Stopping Raise network interfaces... Stopping Network Time Synchronization... Stopping Update UTMP about System Boot/Shutdown... Stopping Load/Save Random Seed... Unmounting /tmp... Unmounting /opt/rootfs... Starting Reboot... [ 59.648836] watchdog: watchdog0: watchdog did not stop! [ 82.537036] i915 0000:00:02.0: Failed to load DMC firmware i915/skl_dmc_ver1_27.bin. Disabling runtime power management. [ 82.547911] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 82.547990] [drm] GuC: Failed to fetch firmware i915/skl_guc_32.0.3.bin (error -11) [ 82.568082] [drm] GuC: Firmware can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 82.580696] i915 0000:00:02.0: Direct firmware load for i915/skl_huc_ver01_07_1398.bin failed with error -2 [ 82.590434] i915 0000:00:02.0: Falling back to syfs fallback for: i915/skl_huc_ver01_07_1398.bin [ 90.045295] systemd-udevd[254]: giving up waiting for workers to finish [ 90.051928] systemd-udevd[254]: event loop failed: Connection timed out [ 123.496962] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component [ 123.551532] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 123.561973] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 123.569974] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 123.577555] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 123.583915] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 123.589319] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 123.595853] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 123.647814] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec [ 123.655715] hdaudio hdaudioC0D2: Unable to bind the codec [ 123.662279] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 123.671650] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 143.977042] [drm] HuC: Failed to fetch firmware i915/skl_huc_ver01_07_1398.bin (error -11) [ 143.985309] [drm] HuC: Firmware can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 143.998371] i915 0000:00:02.0: GuC initialization failed -8 [ 144.003980] [drm:i915_gem_init_hw [i915]] *ERROR* Enabling uc failed (-5) [ 144.010781] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged! [ 144.017926] i915 0000:00:02.0: Please file a bug at https://bugs.freedesktop.org/enter_bug.cgi?product=DRI against DRM/Intel providing the dmesg log by booting with drm.debug=0xf [ 144.036871] [drm] Initialized i915 1.6.0 20190328 for 0000:00:02.0 on minor 0 [ 144.045389] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 144.052437] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 [ 144.096100] fbcon: inteldrmfb (fb0) is primary device [ 144.124738] Console: switching to colour frame buffer device 160x64 [ 144.155237] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 144.167142] systemd-udevd[304]: failed to send result of seq 1848 to main daemon: Connection refused [ 144.182164] kvm: exiting hardware virtualization [ 144.188059] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 144.194011] e1000e: EEE TX LPI TIMER: 00000011 reboot: Restarting system