From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v4 2/8] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook
Date: Mon, 5 Aug 2019 15:21:06 -0700 [thread overview]
Message-ID: <20190805222106.GC3060@intel.com> (raw)
In-Reply-To: <20190627225736.2665-2-manasi.d.navare@intel.com>
Lucas/Maarten/Daniel, could you please review this so this can be upstreamed
and I can base my tran port sync series on top without carrying this over?
This is a cleanup patch with no functional change and addresses the review
commen from Daniel.
Manasi
On Thu, Jun 27, 2019 at 03:57:36PM -0700, Manasi Navare wrote:
> Create a new hook commit_modeset_disables() consistent with the naming
> in drm atomic helpers and similar to the commit_modeset_enables() hook.
> This helps better organize the disable sequence in atomic_commit_tail()
> and move that to this disable hook.
>
> No functional change
>
> v2:
> * Create a helper for old_crtc_state disables (Lucas)
>
> Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 116 ++++++++++++-------
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> 2 files changed, 75 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 71e86e2f0f90..4b088fa24aad 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13613,6 +13613,69 @@ static void intel_update_crtc(struct drm_crtc *crtc,
> intel_finish_crtc_commit(to_intel_atomic_state(state), intel_crtc);
> }
>
> +static void intel_old_crtc_state_disables(struct drm_atomic_state *state,
> + struct intel_crtc_state *old_intel_crtc_state,
> + struct intel_crtc_state *new_intel_crtc_state,
> + struct intel_crtc *intel_crtc)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->dev);
> + struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
> + struct drm_crtc_state *new_crtc_state = &new_intel_crtc_state->base;
> +
> + intel_crtc_disable_planes(intel_state, intel_crtc);
> +
> + /*
> + * We need to disable pipe CRC before disabling the pipe,
> + * or we race against vblank off.
> + */
> + intel_crtc_disable_pipe_crc(intel_crtc);
> +
> + dev_priv->display.crtc_disable(old_intel_crtc_state, state);
> + intel_crtc->active = false;
> + intel_fbc_disable(intel_crtc);
> + intel_disable_shared_dpll(old_intel_crtc_state);
> +
> + /*
> + * Underruns don't always raise interrupts,
> + * so check manually.
> + */
> + intel_check_cpu_fifo_underruns(dev_priv);
> + intel_check_pch_fifo_underruns(dev_priv);
> +
> + /* FIXME unify this for all platforms */
> + if (!new_crtc_state->active &&
> + !HAS_GMCH(dev_priv) &&
> + dev_priv->display.initial_watermarks)
> + dev_priv->display.initial_watermarks(intel_state,
> + new_intel_crtc_state);
> +}
> +
> +static void intel_commit_modeset_disables(struct drm_atomic_state *state)
> +{
> + struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> + struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
> + struct drm_crtc *crtc;
> + struct intel_crtc *intel_crtc;
> + int i;
> +
> + for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> + old_intel_crtc_state = to_intel_crtc_state(old_crtc_state);
> + new_intel_crtc_state = to_intel_crtc_state(new_crtc_state);
> + intel_crtc = to_intel_crtc(crtc);
> +
> + if (!needs_modeset(new_crtc_state))
> + continue;
> +
> + intel_pre_plane_update(old_intel_crtc_state, new_intel_crtc_state);
> +
> + if (old_crtc_state->active)
> + intel_old_crtc_state_disables(state,
> + old_intel_crtc_state,
> + new_intel_crtc_state,
> + intel_crtc);
> + }
> +}
> +
> static void intel_commit_modeset_enables(struct drm_atomic_state *state)
> {
> struct drm_crtc *crtc;
> @@ -13769,7 +13832,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
> struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> - struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
> + struct intel_crtc_state *new_intel_crtc_state;
> struct drm_crtc *crtc;
> struct intel_crtc *intel_crtc;
> u64 put_domains[I915_MAX_PIPES] = {};
> @@ -13778,58 +13841,24 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>
> intel_atomic_commit_fence_wait(intel_state);
>
> - drm_atomic_helper_wait_for_dependencies(state);
> -
> - if (intel_state->modeset)
> - wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
> -
> for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> - old_intel_crtc_state = to_intel_crtc_state(old_crtc_state);
> new_intel_crtc_state = to_intel_crtc_state(new_crtc_state);
> intel_crtc = to_intel_crtc(crtc);
>
> if (needs_modeset(new_crtc_state) ||
> - to_intel_crtc_state(new_crtc_state)->update_pipe) {
> -
> + new_intel_crtc_state->update_pipe) {
> put_domains[intel_crtc->pipe] =
> modeset_get_crtc_power_domains(crtc,
> - new_intel_crtc_state);
> + new_intel_crtc_state);
> }
> + }
>
> - if (!needs_modeset(new_crtc_state))
> - continue;
> -
> - intel_pre_plane_update(old_intel_crtc_state, new_intel_crtc_state);
> -
> - if (old_crtc_state->active) {
> - intel_crtc_disable_planes(intel_state, intel_crtc);
> -
> - /*
> - * We need to disable pipe CRC before disabling the pipe,
> - * or we race against vblank off.
> - */
> - intel_crtc_disable_pipe_crc(intel_crtc);
> + drm_atomic_helper_wait_for_dependencies(state);
>
> - dev_priv->display.crtc_disable(old_intel_crtc_state, state);
> - intel_crtc->active = false;
> - intel_fbc_disable(intel_crtc);
> - intel_disable_shared_dpll(old_intel_crtc_state);
> + if (intel_state->modeset)
> + wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
>
> - /*
> - * Underruns don't always raise
> - * interrupts, so check manually.
> - */
> - intel_check_cpu_fifo_underruns(dev_priv);
> - intel_check_pch_fifo_underruns(dev_priv);
> -
> - /* FIXME unify this for all platforms */
> - if (!new_crtc_state->active &&
> - !HAS_GMCH(dev_priv) &&
> - dev_priv->display.initial_watermarks)
> - dev_priv->display.initial_watermarks(intel_state,
> - new_intel_crtc_state);
> - }
> - }
> + dev_priv->display.commit_modeset_disables(state);
>
> /* FIXME: Eventually get rid of our intel_crtc->config pointer */
> for_each_new_crtc_in_state(state, crtc, new_crtc_state, i)
> @@ -15722,6 +15751,9 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
> dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
> else
> dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
> +
> + dev_priv->display.commit_modeset_disables = intel_commit_modeset_disables;
> +
> }
>
> static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 075d7eb3c3f2..edb6b431f90c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -311,6 +311,7 @@ struct drm_i915_display_funcs {
> void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
> struct drm_atomic_state *old_state);
> void (*commit_modeset_enables)(struct drm_atomic_state *state);
> + void (*commit_modeset_disables)(struct drm_atomic_state *state);
> void (*audio_codec_enable)(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state);
> --
> 2.19.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-08-05 22:19 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-24 21:08 [PATCH v3 0/8] Enable Transcoder Port Sync feature for tiled displays Manasi Navare
2019-06-24 21:08 ` [PATCH v3 1/8] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-05 22:19 ` Manasi Navare
2019-08-07 0:11 ` Tolakanahalli Pradeep, Madhumitha
2019-08-23 0:20 ` Manasi Navare
2019-08-23 6:20 ` Jani Nikula
2019-08-23 17:53 ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 2/8] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-06-27 22:57 ` [PATCH v4 " Manasi Navare
2019-08-05 22:21 ` Manasi Navare [this message]
2019-08-23 0:22 ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 3/8] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Manasi Navare
2019-06-24 21:08 ` [PATCH v3 4/8] drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports Manasi Navare
2019-06-24 21:08 ` [PATCH v3 5/8] drm/i915/display/icl: HW state readout for transcoder port sync config Manasi Navare
2019-06-24 21:08 ` [PATCH v3 6/8] drm/i915/display/icl: Enable master-slaves in trans port sync mode in correct order Manasi Navare
2019-07-30 10:53 ` Maarten Lankhorst
2019-07-31 23:24 ` Manasi Navare
2019-08-01 15:07 ` Maarten Lankhorst
2019-08-01 23:51 ` Manasi Navare
2019-08-20 21:12 ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 7/8] drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence Manasi Navare
2019-06-24 21:08 ` [PATCH v3 8/8] drm/i915/display/icl: In port sync mode disable slaves first then masters Manasi Navare
2019-06-25 6:34 ` Lucas De Marchi
2019-06-25 19:02 ` Manasi Navare
2019-06-27 20:01 ` Manasi Navare
2019-06-27 22:57 ` [PATCH v4 " Manasi Navare
2019-07-30 9:44 ` Maarten Lankhorst
2019-06-24 21:27 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Transcoder Port Sync feature for Tiled displays (rev2) Patchwork
2019-06-24 21:47 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-06-27 23:38 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Transcoder Port Sync feature for Tiled displays (rev4) Patchwork
2019-06-28 10:42 ` ✓ Fi.CI.BAT: success " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190805222106.GC3060@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).