intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v4 2/8] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook
Date: Thu, 22 Aug 2019 17:22:01 -0700	[thread overview]
Message-ID: <20190823002201.GD701@intel.com> (raw)
In-Reply-To: <20190627225736.2665-2-manasi.d.navare@intel.com>

Ville/Maarten/Daniel,

Could you please review this? There is no functional changes
just moving the disable part to a separate hook

Manasi


On Thu, Jun 27, 2019 at 03:57:36PM -0700, Manasi Navare wrote:
> Create a new hook commit_modeset_disables() consistent with the naming
> in drm atomic helpers and similar to the commit_modeset_enables() hook.
> This helps better organize the disable sequence in atomic_commit_tail()
> and move that to this disable hook.
> 
> No functional change
> 
> v2:
> * Create a helper for old_crtc_state disables (Lucas)
> 
> Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 116 ++++++++++++-------
>  drivers/gpu/drm/i915/i915_drv.h              |   1 +
>  2 files changed, 75 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 71e86e2f0f90..4b088fa24aad 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13613,6 +13613,69 @@ static void intel_update_crtc(struct drm_crtc *crtc,
>  	intel_finish_crtc_commit(to_intel_atomic_state(state), intel_crtc);
>  }
>  
> +static void intel_old_crtc_state_disables(struct drm_atomic_state *state,
> +					  struct intel_crtc_state *old_intel_crtc_state,
> +					  struct intel_crtc_state *new_intel_crtc_state,
> +					  struct intel_crtc *intel_crtc)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->dev);
> +	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
> +	struct drm_crtc_state *new_crtc_state = &new_intel_crtc_state->base;
> +
> +	intel_crtc_disable_planes(intel_state, intel_crtc);
> +
> +	/*
> +	 * We need to disable pipe CRC before disabling the pipe,
> +	 * or we race against vblank off.
> +	 */
> +	intel_crtc_disable_pipe_crc(intel_crtc);
> +
> +	dev_priv->display.crtc_disable(old_intel_crtc_state, state);
> +	intel_crtc->active = false;
> +	intel_fbc_disable(intel_crtc);
> +	intel_disable_shared_dpll(old_intel_crtc_state);
> +
> +	/*
> +	 * Underruns don't always raise interrupts,
> +	 * so check manually.
> +	 */
> +	intel_check_cpu_fifo_underruns(dev_priv);
> +	intel_check_pch_fifo_underruns(dev_priv);
> +
> +	/* FIXME unify this for all platforms */
> +	if (!new_crtc_state->active &&
> +	    !HAS_GMCH(dev_priv) &&
> +	    dev_priv->display.initial_watermarks)
> +		dev_priv->display.initial_watermarks(intel_state,
> +						     new_intel_crtc_state);
> +}
> +
> +static void intel_commit_modeset_disables(struct drm_atomic_state *state)
> +{
> +	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> +	struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
> +	struct drm_crtc *crtc;
> +	struct intel_crtc *intel_crtc;
> +	int i;
> +
> +	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> +		old_intel_crtc_state = to_intel_crtc_state(old_crtc_state);
> +		new_intel_crtc_state = to_intel_crtc_state(new_crtc_state);
> +		intel_crtc = to_intel_crtc(crtc);
> +
> +		if (!needs_modeset(new_crtc_state))
> +			continue;
> +
> +		intel_pre_plane_update(old_intel_crtc_state, new_intel_crtc_state);
> +
> +		if (old_crtc_state->active)
> +			intel_old_crtc_state_disables(state,
> +						      old_intel_crtc_state,
> +						      new_intel_crtc_state,
> +						      intel_crtc);
> +	}
> +}
> +
>  static void intel_commit_modeset_enables(struct drm_atomic_state *state)
>  {
>  	struct drm_crtc *crtc;
> @@ -13769,7 +13832,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>  	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> -	struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
> +	struct intel_crtc_state *new_intel_crtc_state;
>  	struct drm_crtc *crtc;
>  	struct intel_crtc *intel_crtc;
>  	u64 put_domains[I915_MAX_PIPES] = {};
> @@ -13778,58 +13841,24 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>  
>  	intel_atomic_commit_fence_wait(intel_state);
>  
> -	drm_atomic_helper_wait_for_dependencies(state);
> -
> -	if (intel_state->modeset)
> -		wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
> -
>  	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> -		old_intel_crtc_state = to_intel_crtc_state(old_crtc_state);
>  		new_intel_crtc_state = to_intel_crtc_state(new_crtc_state);
>  		intel_crtc = to_intel_crtc(crtc);
>  
>  		if (needs_modeset(new_crtc_state) ||
> -		    to_intel_crtc_state(new_crtc_state)->update_pipe) {
> -
> +		    new_intel_crtc_state->update_pipe) {
>  			put_domains[intel_crtc->pipe] =
>  				modeset_get_crtc_power_domains(crtc,
> -					new_intel_crtc_state);
> +							       new_intel_crtc_state);
>  		}
> +	}
>  
> -		if (!needs_modeset(new_crtc_state))
> -			continue;
> -
> -		intel_pre_plane_update(old_intel_crtc_state, new_intel_crtc_state);
> -
> -		if (old_crtc_state->active) {
> -			intel_crtc_disable_planes(intel_state, intel_crtc);
> -
> -			/*
> -			 * We need to disable pipe CRC before disabling the pipe,
> -			 * or we race against vblank off.
> -			 */
> -			intel_crtc_disable_pipe_crc(intel_crtc);
> +	drm_atomic_helper_wait_for_dependencies(state);
>  
> -			dev_priv->display.crtc_disable(old_intel_crtc_state, state);
> -			intel_crtc->active = false;
> -			intel_fbc_disable(intel_crtc);
> -			intel_disable_shared_dpll(old_intel_crtc_state);
> +	if (intel_state->modeset)
> +		wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
>  
> -			/*
> -			 * Underruns don't always raise
> -			 * interrupts, so check manually.
> -			 */
> -			intel_check_cpu_fifo_underruns(dev_priv);
> -			intel_check_pch_fifo_underruns(dev_priv);
> -
> -			/* FIXME unify this for all platforms */
> -			if (!new_crtc_state->active &&
> -			    !HAS_GMCH(dev_priv) &&
> -			    dev_priv->display.initial_watermarks)
> -				dev_priv->display.initial_watermarks(intel_state,
> -								     new_intel_crtc_state);
> -		}
> -	}
> +	dev_priv->display.commit_modeset_disables(state);
>  
>  	/* FIXME: Eventually get rid of our intel_crtc->config pointer */
>  	for_each_new_crtc_in_state(state, crtc, new_crtc_state, i)
> @@ -15722,6 +15751,9 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
>  		dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
>  	else
>  		dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
> +
> +	dev_priv->display.commit_modeset_disables = intel_commit_modeset_disables;
> +
>  }
>  
>  static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 075d7eb3c3f2..edb6b431f90c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -311,6 +311,7 @@ struct drm_i915_display_funcs {
>  	void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
>  			     struct drm_atomic_state *old_state);
>  	void (*commit_modeset_enables)(struct drm_atomic_state *state);
> +	void (*commit_modeset_disables)(struct drm_atomic_state *state);
>  	void (*audio_codec_enable)(struct intel_encoder *encoder,
>  				   const struct intel_crtc_state *crtc_state,
>  				   const struct drm_connector_state *conn_state);
> -- 
> 2.19.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-08-23  8:12 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-24 21:08 [PATCH v3 0/8] Enable Transcoder Port Sync feature for tiled displays Manasi Navare
2019-06-24 21:08 ` [PATCH v3 1/8] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-05 22:19   ` Manasi Navare
2019-08-07  0:11   ` Tolakanahalli Pradeep, Madhumitha
2019-08-23  0:20   ` Manasi Navare
2019-08-23  6:20     ` Jani Nikula
2019-08-23 17:53       ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 2/8] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-06-27 22:57   ` [PATCH v4 " Manasi Navare
2019-08-05 22:21     ` Manasi Navare
2019-08-23  0:22     ` Manasi Navare [this message]
2019-06-24 21:08 ` [PATCH v3 3/8] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Manasi Navare
2019-06-24 21:08 ` [PATCH v3 4/8] drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports Manasi Navare
2019-06-24 21:08 ` [PATCH v3 5/8] drm/i915/display/icl: HW state readout for transcoder port sync config Manasi Navare
2019-06-24 21:08 ` [PATCH v3 6/8] drm/i915/display/icl: Enable master-slaves in trans port sync mode in correct order Manasi Navare
2019-07-30 10:53   ` Maarten Lankhorst
2019-07-31 23:24     ` Manasi Navare
2019-08-01 15:07       ` Maarten Lankhorst
2019-08-01 23:51         ` Manasi Navare
2019-08-20 21:12         ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 7/8] drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence Manasi Navare
2019-06-24 21:08 ` [PATCH v3 8/8] drm/i915/display/icl: In port sync mode disable slaves first then masters Manasi Navare
2019-06-25  6:34   ` Lucas De Marchi
2019-06-25 19:02     ` Manasi Navare
2019-06-27 20:01     ` Manasi Navare
2019-06-27 22:57   ` [PATCH v4 " Manasi Navare
2019-07-30  9:44     ` Maarten Lankhorst
2019-06-24 21:27 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Transcoder Port Sync feature for Tiled displays (rev2) Patchwork
2019-06-24 21:47 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-06-27 23:38 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Transcoder Port Sync feature for Tiled displays (rev4) Patchwork
2019-06-28 10:42 ` ✓ Fi.CI.BAT: success " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190823002201.GD701@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).