Re: [PATCH v3 4/6] drm/i915/display/icl: Enable master-slaves in trans port sync

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Sun, Sep 22, 2019 at 10:08:05AM -0700, Manasi Navare wrote:
> As per the display enable sequence, we need to follow the enable sequence
> for slaves first with DP_TP_CTL set to Idle and configure the transcoder
> port sync register to select the corersponding master, then follow the
> enable sequence for master leaving DP_TP_CTL to idle.
> At this point the transcoder port sync mode is configured and enabled
> and the Vblanks of both ports are synchronized so then set DP_TP_CTL
> for the slave and master to Normal and do post crtc enable updates.
> 
> v6:
> * Modeset implies active_changed, remove one condition (Maarten)
> v5:
> * Fix checkpatch warning (Manasi)
> v4:
> * Reuse skl_commit_modeset_enables() hook (Maarten)
> * Obtain slave crtc and states from master (Maarten)
> v3:
> * Rebase on drm-tip (Manasi)
> v2:
> * Create a icl_update_crtcs hook (Maarten, Danvet)
> * This sequence only for CRTCs in trans port sync mode (Maarten)
> 
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c     |   3 +-
>  drivers/gpu/drm/i915/display/intel_display.c | 141 ++++++++++++++++++-
>  drivers/gpu/drm/i915/display/intel_display.h |   2 +
>  3 files changed, 142 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 3e6394139964..62e9f5602b6b 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3347,7 +3347,8 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
>  					      true);
>  	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
>  	intel_dp_start_link_train(intel_dp);
> -	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> +	if ((port != PORT_A || INTEL_GEN(dev_priv) >= 9) &&
> +	    !is_trans_port_sync_mode(dev_priv, crtc_state))
>  		intel_dp_stop_link_train(intel_dp);
>  
>  	intel_ddi_enable_fec(encoder, crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 711987eb4e9e..10425a789b5e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13928,6 +13928,30 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>  	intel_finish_crtc_commit(state, crtc);
>  }
>  
> +static struct intel_crtc *intel_get_slave_crtc(struct drm_i915_private *dev_priv,

'dev_priv' can be derived from the crtc state.

> +					       struct intel_crtc_state *new_crtc_state)

const

> +{

cpu_transcoder = ffs(slaves) - 1;
return get_crtc((enum pipe)cpu_transcoder);

or something.

Maybe toss in a  WARN_ON(!is_power_of_2(slaves)).



> +	if (new_crtc_state->sync_mode_slaves_mask &
> +	    BIT(TRANSCODER_A))
> +		return intel_get_crtc_for_pipe(dev_priv,
> +					       PIPE_A);
> +	else if (new_crtc_state->sync_mode_slaves_mask &
> +		 BIT(TRANSCODER_B))
> +		return intel_get_crtc_for_pipe(dev_priv,
> +					       PIPE_B);
> +	else if (new_crtc_state->sync_mode_slaves_mask &
> +		 BIT(TRANSCODER_C))
> +		return intel_get_crtc_for_pipe(dev_priv,
> +					       PIPE_C);
> +	else if (new_crtc_state->sync_mode_slaves_mask &
> +		 BIT(TRANSCODER_D))
> +		return intel_get_crtc_for_pipe(dev_priv,
> +					       PIPE_D);
> +	/* should never happen */
> +	WARN_ON(1);
> +	return NULL;
> +}
> +
>  static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
>  					  struct intel_crtc_state *old_crtc_state,
>  					  struct intel_crtc_state *new_crtc_state,
> @@ -14006,6 +14030,104 @@ static void intel_commit_modeset_enables(struct intel_atomic_state *state)
>  	}
>  }
>  
> +static void intel_crtc_enable_trans_port_sync(struct intel_crtc *crtc,
> +					      struct intel_atomic_state *state,
> +					      struct intel_crtc_state *new_crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +
> +	update_scanline_offset(new_crtc_state);
> +	dev_priv->display.crtc_enable(new_crtc_state, state);
> +	intel_crtc_enable_pipe_crc(crtc);
> +}
> +
> +static void intel_set_dp_tp_ctl_normal(struct intel_crtc *crtc,
> +				       struct intel_atomic_state *state)
> +{
> +	struct drm_connector_state *conn_state;
> +	struct drm_connector *conn;
> +	struct intel_dp *intel_dp;
> +	int i;
> +
> +	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
> +		if (conn_state->crtc == &crtc->base)
> +			break;
> +	}
> +	intel_dp = enc_to_intel_dp(&intel_attached_encoder(conn)->base);
> +	intel_dp_stop_link_train(intel_dp);
> +}
> +
> +static void intel_post_crtc_enable_updates(struct intel_crtc *crtc,
> +					   struct intel_atomic_state *state,
> +					   struct intel_crtc_state *old_crtc_state,
> +					   struct intel_crtc_state *new_crtc_state)
> +{
> +	struct intel_plane_state *new_plane_state =
> +		intel_atomic_get_new_plane_state(state,
> +						 to_intel_plane(crtc->base.primary));
> +
> +	if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
> +		intel_fbc_disable(crtc);
> +	else if (new_plane_state)
> +		intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
> +
> +	intel_begin_crtc_commit(state, crtc);
> +	skl_update_planes_on_crtc(state, crtc);
> +	intel_finish_crtc_commit(state, crtc);
> +}
> +
> +static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
> +					       struct intel_atomic_state *state,
> +					       struct intel_crtc_state *old_crtc_state,
> +					       struct intel_crtc_state *new_crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +	struct intel_crtc *slave_crtc = intel_get_slave_crtc(dev_priv,
> +							     new_crtc_state);
> +	struct intel_crtc_state *new_slave_crtc_state =
> +		intel_atomic_get_new_crtc_state(state, slave_crtc);
> +	struct intel_crtc_state *old_slave_crtc_state =
> +		intel_atomic_get_old_crtc_state(state, slave_crtc);
> +
> +	WARN_ON(!slave_crtc || !new_slave_crtc_state ||
> +		!old_slave_crtc_state);
> +
> +	DRM_DEBUG_KMS("Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
> +		      crtc->base.base.id, crtc->base.name, slave_crtc->base.base.id,
> +		      slave_crtc->base.name);
> +
> +	/* Enable seq for slave with with DP_TP_CTL left Idle until the
> +	 * master is ready
> +	 */
> +	intel_crtc_enable_trans_port_sync(slave_crtc,
> +					  state,
> +					  new_slave_crtc_state);
> +
> +	/* Enable seq for master with with DP_TP_CTL left Idle */
> +	intel_crtc_enable_trans_port_sync(crtc,
> +					  state,
> +					  new_crtc_state);
> +
> +	/* Set Slave's DP_TP_CTL to Normal */
> +	intel_set_dp_tp_ctl_normal(slave_crtc,
> +				   state);
> +
> +	/* Set Master's DP_TP_CTL To Normal */
> +	usleep_range(200, 400);
> +	intel_set_dp_tp_ctl_normal(crtc,
> +				   state);
> +
> +	/* Now do the post crtc enable for all master and slaves */
> +	intel_post_crtc_enable_updates(slave_crtc,
> +				       state,
> +				       new_slave_crtc_state,
> +				       old_slave_crtc_state);
> +	intel_post_crtc_enable_updates(crtc,
> +				       state,
> +				       new_crtc_state,
> +				       old_crtc_state);
> +}
> +
>  static void skl_commit_modeset_enables(struct intel_atomic_state *state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> @@ -14040,6 +14162,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
>  		for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
>  			bool vbl_wait = false;
>  			unsigned int cmask = drm_crtc_mask(&crtc->base);
> +			bool modeset = needs_modeset(new_crtc_state);
>  
>  			pipe = crtc->pipe;
>  
> @@ -14062,12 +14185,24 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
>  			 */
>  			if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
>  						 &old_crtc_state->wm.skl.ddb) &&
> -			    !new_crtc_state->base.active_changed &&
> +			    !modeset &&
>  			    state->wm_results.dirty_pipes != updated)
>  				vbl_wait = true;
>  
> -			intel_update_crtc(crtc, state, old_crtc_state,
> -					  new_crtc_state);
> +			if (modeset && is_trans_port_sync_mode(dev_priv,
> +							       new_crtc_state)) {
> +				if (is_trans_port_sync_master(dev_priv,
> +							      new_crtc_state))
> +					intel_update_trans_port_sync_crtcs(crtc,
> +									   state,
> +									   old_crtc_state,
> +									   new_crtc_state);
> +				else
> +					continue;
> +			} else {
> +				intel_update_crtc(crtc, state, old_crtc_state,
> +						  new_crtc_state);
> +			}
>  
>  			if (vbl_wait)
>  				intel_wait_for_vblank(dev_priv, pipe);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 1623face436b..efa4d62514ce 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -27,6 +27,7 @@
>  
>  #include <drm/drm_util.h>
>  #include <drm/i915_drm.h>
> +#include "intel_dp_link_training.h"
>  
>  enum link_m_n_set;
>  struct dpll;
> @@ -54,6 +55,7 @@ struct intel_plane;
>  struct intel_plane_state;
>  struct intel_remapped_info;
>  struct intel_rotation_info;
> +struct intel_crtc_state;
>  
>  enum i915_gpio {
>  	GPIOA,
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx