From: "Huang, Sean Z" <sean.z.huang@intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [RFC-v1 04/16] drm/i915/pxp: set KCR reg init during the boot time
Date: Sun, 6 Dec 2020 16:21:22 -0800 [thread overview]
Message-ID: <20201207002134.13731-5-sean.z.huang@intel.com> (raw)
In-Reply-To: <20201207002134.13731-1-sean.z.huang@intel.com>
Set the KCR init during the boot time, which is required by
hardware, to allow us doing further protection operation such
as sending commands to GPU or TEE
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
---
drivers/gpu/drm/i915/Makefile | 3 +-
drivers/gpu/drm/i915/pxp/intel_pxp.c | 11 ++++++-
drivers/gpu/drm/i915/pxp/intel_pxp_sm.c | 38 +++++++++++++++++++++++++
drivers/gpu/drm/i915/pxp/intel_pxp_sm.h | 20 +++++++++++++
4 files changed, 70 insertions(+), 2 deletions(-)
create mode 100644 drivers/gpu/drm/i915/pxp/intel_pxp_sm.c
create mode 100644 drivers/gpu/drm/i915/pxp/intel_pxp_sm.h
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 99efac469cc2..131bd8921565 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -257,7 +257,8 @@ i915-y += i915_perf.o
# Protected execution platform (PXP) support
i915-$(CONFIG_DRM_I915_PXP) += \
pxp/intel_pxp.o \
- pxp/intel_pxp_context.o
+ pxp/intel_pxp_context.o \
+ pxp/intel_pxp_sm.o
# Post-mortem debug and GPU hang state capture
i915-$(CONFIG_DRM_I915_CAPTURE_ERROR) += i915_gpu_error.o
diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp.c b/drivers/gpu/drm/i915/pxp/intel_pxp.c
index 769bfd9bc6b8..d74a32b29716 100644
--- a/drivers/gpu/drm/i915/pxp/intel_pxp.c
+++ b/drivers/gpu/drm/i915/pxp/intel_pxp.c
@@ -6,6 +6,7 @@
#include "i915_drv.h"
#include "intel_pxp.h"
#include "intel_pxp_context.h"
+#include "intel_pxp_sm.h"
static void intel_pxp_write_irq_mask_reg(struct drm_i915_private *i915, u32 mask)
{
@@ -77,6 +78,8 @@ static void intel_pxp_irq_work(struct work_struct *work)
int intel_pxp_init(struct drm_i915_private *i915)
{
+ int ret;
+
if (!i915)
return -EINVAL;
@@ -92,13 +95,19 @@ int intel_pxp_init(struct drm_i915_private *i915)
return -EFAULT;
}
+ ret = pxp_sm_set_kcr_init_reg(i915);
+ if (ret) {
+ drm_err(&i915->drm, "Failed to set kcr init reg\n");
+ return ret;
+ }
+
INIT_WORK(&i915->pxp.irq_work, intel_pxp_irq_work);
i915->pxp.handled_irr = (PXP_IRQ_VECTOR_DISPLAY_PXP_STATE_TERMINATED |
PXP_IRQ_VECTOR_DISPLAY_APP_TERM_PER_FW_REQ |
PXP_IRQ_VECTOR_PXP_DISP_STATE_RESET_COMPLETE);
- return 0;
+ return ret;
}
void intel_pxp_uninit(struct drm_i915_private *i915)
diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp_sm.c b/drivers/gpu/drm/i915/pxp/intel_pxp_sm.c
new file mode 100644
index 000000000000..a2c9c71d2372
--- /dev/null
+++ b/drivers/gpu/drm/i915/pxp/intel_pxp_sm.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright(c) 2020, Intel Corporation. All rights reserved.
+ */
+
+#include "gt/intel_context.h"
+#include "gt/intel_engine_pm.h"
+
+#include "intel_pxp.h"
+#include "intel_pxp_sm.h"
+#include "intel_pxp_context.h"
+
+static int pxp_reg_write(struct drm_i915_private *i915, u32 offset, u32 regval)
+{
+ intel_wakeref_t wakeref;
+
+ if (!i915)
+ return -EINVAL;
+
+ with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
+ i915_reg_t reg_offset = {offset};
+
+ intel_uncore_write(&i915->uncore, reg_offset, regval);
+ }
+
+ return 0;
+}
+
+int pxp_sm_set_kcr_init_reg(struct drm_i915_private *i915)
+{
+ int ret;
+
+ ret = pxp_reg_write(i915, KCR_INIT.reg, KCR_INIT_ALLOW_DISPLAY_ME_WRITES);
+ if (ret)
+ drm_err(&i915->drm, "Failed to write()\n");
+
+ return ret;
+}
diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp_sm.h b/drivers/gpu/drm/i915/pxp/intel_pxp_sm.h
new file mode 100644
index 000000000000..d061f395aa16
--- /dev/null
+++ b/drivers/gpu/drm/i915/pxp/intel_pxp_sm.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright(c) 2020, Intel Corporation. All rights reserved.
+ */
+
+#ifndef __INTEL_PXP_SM_H__
+#define __INTEL_PXP_SM_H__
+
+#include "i915_drv.h"
+#include "i915_reg.h"
+
+/* KCR register definitions */
+#define KCR_INIT _MMIO(0x320f0)
+#define KCR_INIT_MASK_SHIFT (16)
+/* Setting KCR Init bit is required after system boot */
+#define KCR_INIT_ALLOW_DISPLAY_ME_WRITES (BIT(14) | (BIT(14) << KCR_INIT_MASK_SHIFT))
+
+int pxp_sm_set_kcr_init_reg(struct drm_i915_private *i915);
+
+#endif /* __INTEL_PXP_SM_H__ */
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-12-07 0:22 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-07 0:21 [Intel-gfx] [RFC-v1 00/16] Introduce Intel PXP component - Mesa single session Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 01/16] drm/i915/pxp: Introduce Intel PXP component Huang, Sean Z
2020-12-07 10:01 ` Joonas Lahtinen
2020-12-07 18:25 ` Huang, Sean Z
2020-12-07 18:48 ` Huang, Sean Z
2020-12-10 9:02 ` Joonas Lahtinen
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 02/16] drm/i915/pxp: Enable PXP irq worker and callback stub Huang, Sean Z
2020-12-07 10:21 ` Joonas Lahtinen
2020-12-08 0:34 ` Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 03/16] drm/i915/pxp: Add PXP context for logical hardware states Huang, Sean Z
2020-12-07 10:50 ` Joonas Lahtinen
2020-12-08 20:11 ` Huang, Sean Z
2020-12-07 0:21 ` Huang, Sean Z [this message]
2020-12-07 11:10 ` [Intel-gfx] [RFC-v1 04/16] drm/i915/pxp: set KCR reg init during the boot time Joonas Lahtinen
2020-12-09 4:01 ` Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 05/16] drm/i915/pxp: Read register to check hardware session state Huang, Sean Z
2020-12-07 11:44 ` Joonas Lahtinen
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 06/16] drm/i915/pxp: Implement funcs to get/set PXP tag Huang, Sean Z
2020-12-07 11:52 ` Joonas Lahtinen
2020-12-09 2:57 ` Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 07/16] drm/i915/pxp: Implement funcs to create the TEE channel Huang, Sean Z
2020-12-07 11:55 ` Joonas Lahtinen
2020-12-09 5:10 ` Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 08/16] drm/i915/pxp: Create the arbitrary session after boot Huang, Sean Z
2020-12-07 12:00 ` Joonas Lahtinen
2020-12-09 5:11 ` Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 09/16] drm/i915/pxp: Func to send hardware session termination Huang, Sean Z
2020-12-07 12:21 ` Joonas Lahtinen
2020-12-09 5:16 ` Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 10/16] drm/i915/pxp: Destroy arb session upon teardown Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 11/16] drm/i915/pxp: Enable PXP power management Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 12/16] drm/i915/pxp: Expose session state for display protection flip Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 13/16] mei: pxp: export pavp client to me client bus Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 14/16] drm/i915/uapi: introduce drm_i915_gem_create_ext Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 15/16] drm/i915/pxp: User interface for Protected buffer Huang, Sean Z
2020-12-07 0:21 ` [Intel-gfx] [RFC-v1 16/16] drm/i915/pxp: Add plane decryption support Huang, Sean Z
2020-12-07 6:21 ` Anshuman Gupta
2020-12-07 0:42 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Intel PXP component - Mesa single session Patchwork
2020-12-07 1:15 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-12-07 4:01 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201207002134.13731-5-sean.z.huang@intel.com \
--to=sean.z.huang@intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).