From: Lee Shawn C <shawn.c.lee@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lee Shawn C <shawn.c.lee@intel.com>,
Shankar Uma <uma.shankar@intel.com>,
Jani Nikula <jani.nikula@intel.com>,
Imre Deak <imre.deak@intel.com>,
Vidya Srinivas <vidya.srinivas@intel.com>
Subject: [PATCH 2/2] drm/i915: compute pipe bpp from link bandwidth management
Date: Mon, 1 Sep 2025 05:57:21 +0000 [thread overview]
Message-ID: <20250901055721.219995-3-shawn.c.lee@intel.com> (raw)
In-Reply-To: <20250901055721.219995-1-shawn.c.lee@intel.com>
Since intel_fdi_compute_pipe_bpp() is no longer FDI-specific and
now applies to all connectors. Move it to intel_link_bw.c,
and rename to intel_link_bw_compute_pipe_bpp().
v2: Remove unused header file.
Cc: Shankar Uma <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
---
drivers/gpu/drm/i915/display/intel_crt.c | 5 ++--
drivers/gpu/drm/i915/display/intel_fdi.c | 28 --------------------
drivers/gpu/drm/i915/display/intel_fdi.h | 1 -
drivers/gpu/drm/i915/display/intel_hdmi.c | 3 ++-
drivers/gpu/drm/i915/display/intel_link_bw.c | 28 ++++++++++++++++++++
drivers/gpu/drm/i915/display/intel_link_bw.h | 1 +
drivers/gpu/drm/i915/display/intel_lvds.c | 3 ++-
drivers/gpu/drm/i915/display/intel_sdvo.c | 4 +--
8 files changed, 38 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 898c5d9e8f7a..31e68047f217 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -50,6 +50,7 @@
#include "intel_gmbus.h"
#include "intel_hotplug.h"
#include "intel_hotplug_irq.h"
+#include "intel_link_bw.h"
#include "intel_load_detect.h"
#include "intel_pch_display.h"
#include "intel_pch_refclk.h"
@@ -421,7 +422,7 @@ static int pch_crt_compute_config(struct intel_encoder *encoder,
return -EINVAL;
crtc_state->has_pch_encoder = true;
- if (!intel_fdi_compute_pipe_bpp(crtc_state))
+ if (!intel_link_bw_compute_pipe_bpp(crtc_state))
return -EINVAL;
crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
@@ -446,7 +447,7 @@ static int hsw_crt_compute_config(struct intel_encoder *encoder,
return -EINVAL;
crtc_state->has_pch_encoder = true;
- if (!intel_fdi_compute_pipe_bpp(crtc_state))
+ if (!intel_link_bw_compute_pipe_bpp(crtc_state))
return -EINVAL;
crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
diff --git a/drivers/gpu/drm/i915/display/intel_fdi.c b/drivers/gpu/drm/i915/display/intel_fdi.c
index 8039a84671cc..59a36b3a22c1 100644
--- a/drivers/gpu/drm/i915/display/intel_fdi.c
+++ b/drivers/gpu/drm/i915/display/intel_fdi.c
@@ -292,34 +292,6 @@ int intel_fdi_link_freq(struct intel_display *display,
return display->fdi.pll_freq;
}
-/**
- * intel_fdi_compute_pipe_bpp - compute pipe bpp limited by max link bpp
- * @crtc_state: the crtc state
- *
- * Compute the pipe bpp limited by the CRTC's maximum link bpp. Encoders can
- * call this function during state computation in the simple case where the
- * link bpp will always match the pipe bpp. This is the case for all non-DP
- * encoders, while DP encoders will use a link bpp lower than pipe bpp in case
- * of DSC compression.
- *
- * Returns %true in case of success, %false if pipe bpp would need to be
- * reduced below its valid range.
- */
-bool intel_fdi_compute_pipe_bpp(struct intel_crtc_state *crtc_state)
-{
- int pipe_bpp = min(crtc_state->pipe_bpp,
- fxp_q4_to_int(crtc_state->max_link_bpp_x16));
-
- pipe_bpp = rounddown(pipe_bpp, 2 * 3);
-
- if (pipe_bpp < 6 * 3)
- return false;
-
- crtc_state->pipe_bpp = pipe_bpp;
-
- return true;
-}
-
int ilk_fdi_compute_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
diff --git a/drivers/gpu/drm/i915/display/intel_fdi.h b/drivers/gpu/drm/i915/display/intel_fdi.h
index ad5e103c38a8..1cd08df9b0c2 100644
--- a/drivers/gpu/drm/i915/display/intel_fdi.h
+++ b/drivers/gpu/drm/i915/display/intel_fdi.h
@@ -20,7 +20,6 @@ struct intel_link_bw_limits;
int intel_fdi_add_affected_crtcs(struct intel_atomic_state *state);
int intel_fdi_link_freq(struct intel_display *display,
const struct intel_crtc_state *pipe_config);
-bool intel_fdi_compute_pipe_bpp(struct intel_crtc_state *crtc_state);
int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
struct intel_crtc_state *pipe_config);
int intel_fdi_atomic_check_link(struct intel_atomic_state *state,
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 027e8ed0cea8..4650181932d7 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -61,6 +61,7 @@
#include "intel_hdcp_regs.h"
#include "intel_hdcp_shim.h"
#include "intel_hdmi.h"
+#include "intel_link_bw.h"
#include "intel_lspcon.h"
#include "intel_panel.h"
#include "intel_pfit.h"
@@ -2346,7 +2347,7 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
pipe_config->pixel_multiplier = 2;
- if (!intel_fdi_compute_pipe_bpp(pipe_config))
+ if (!intel_link_bw_compute_pipe_bpp(pipe_config))
return -EINVAL;
pipe_config->has_audio =
diff --git a/drivers/gpu/drm/i915/display/intel_link_bw.c b/drivers/gpu/drm/i915/display/intel_link_bw.c
index d194a366ff10..f52dee0ea412 100644
--- a/drivers/gpu/drm/i915/display/intel_link_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_link_bw.c
@@ -164,6 +164,34 @@ int intel_link_bw_reduce_bpp(struct intel_atomic_state *state,
return ret;
}
+/**
+ * intel_link_bw_compute_pipe_bpp - compute pipe bpp limited by max link bpp
+ * @crtc_state: the crtc state
+ *
+ * Compute the pipe bpp limited by the CRTC's maximum link bpp. Encoders can
+ * call this function during state computation in the simple case where the
+ * link bpp will always match the pipe bpp. This is the case for all non-DP
+ * encoders, while DP encoders will use a link bpp lower than pipe bpp in case
+ * of DSC compression.
+ *
+ * Returns %true in case of success, %false if pipe bpp would need to be
+ * reduced below its valid range.
+ */
+bool intel_link_bw_compute_pipe_bpp(struct intel_crtc_state *crtc_state)
+{
+ int pipe_bpp = min(crtc_state->pipe_bpp,
+ fxp_q4_to_int(crtc_state->max_link_bpp_x16));
+
+ pipe_bpp = rounddown(pipe_bpp, 2 * 3);
+
+ if (pipe_bpp < 6 * 3)
+ return false;
+
+ crtc_state->pipe_bpp = pipe_bpp;
+
+ return true;
+}
+
/**
* intel_link_bw_set_bpp_limit_for_pipe - set link bpp limit for a pipe to its minimum
* @state: atomic state
diff --git a/drivers/gpu/drm/i915/display/intel_link_bw.h b/drivers/gpu/drm/i915/display/intel_link_bw.h
index b499042e62b1..95ab7c50c61d 100644
--- a/drivers/gpu/drm/i915/display/intel_link_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_link_bw.h
@@ -27,6 +27,7 @@ int intel_link_bw_reduce_bpp(struct intel_atomic_state *state,
struct intel_link_bw_limits *limits,
u8 pipe_mask,
const char *reason);
+bool intel_link_bw_compute_pipe_bpp(struct intel_crtc_state *crtc_state);
bool intel_link_bw_set_bpp_limit_for_pipe(struct intel_atomic_state *state,
const struct intel_link_bw_limits *old_limits,
struct intel_link_bw_limits *new_limits,
diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index 7e48a235c99f..48f4d8ed4f15 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -48,6 +48,7 @@
#include "intel_dpll.h"
#include "intel_fdi.h"
#include "intel_gmbus.h"
+#include "intel_link_bw.h"
#include "intel_lvds.h"
#include "intel_lvds_regs.h"
#include "intel_panel.h"
@@ -433,7 +434,7 @@ static int intel_lvds_compute_config(struct intel_encoder *encoder,
if (HAS_PCH_SPLIT(display)) {
crtc_state->has_pch_encoder = true;
- if (!intel_fdi_compute_pipe_bpp(crtc_state))
+ if (!intel_link_bw_compute_pipe_bpp(crtc_state))
return -EINVAL;
}
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index 87aff2754f69..8848a33fe9cc 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -47,11 +47,11 @@
#include "intel_display_driver.h"
#include "intel_display_regs.h"
#include "intel_display_types.h"
-#include "intel_fdi.h"
#include "intel_fifo_underrun.h"
#include "intel_gmbus.h"
#include "intel_hdmi.h"
#include "intel_hotplug.h"
+#include "intel_link_bw.h"
#include "intel_panel.h"
#include "intel_sdvo.h"
#include "intel_sdvo_regs.h"
@@ -1367,7 +1367,7 @@ static int intel_sdvo_compute_config(struct intel_encoder *encoder,
if (HAS_PCH_SPLIT(display)) {
pipe_config->has_pch_encoder = true;
- if (!intel_fdi_compute_pipe_bpp(pipe_config))
+ if (!intel_link_bw_compute_pipe_bpp(pipe_config))
return -EINVAL;
}
--
2.34.1
next prev parent reply other threads:[~2025-09-01 6:01 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-06 4:20 [PATCH] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-08-06 13:27 ` Jani Nikula
2025-08-06 14:05 ` Imre Deak
2025-08-06 14:19 ` Imre Deak
2025-08-06 22:40 ` Lee, Shawn C
2025-08-06 16:31 ` ✓ i915.CI.BAT: success for " Patchwork
2025-08-06 19:15 ` ✓ i915.CI.Full: " Patchwork
2025-08-08 9:16 ` [v2] " Lee Shawn C
2025-08-08 9:39 ` Imre Deak
2025-08-11 6:46 ` Lee, Shawn C
2025-08-14 17:35 ` Imre Deak
2025-08-21 8:20 ` Lee, Shawn C
2025-08-08 10:29 ` ✓ i915.CI.BAT: success for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev2) Patchwork
2025-08-08 13:22 ` ✗ i915.CI.Full: failure " Patchwork
2025-08-26 7:05 ` [v3] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-08-26 7:48 ` Jani Nikula
2025-08-26 7:53 ` Lee, Shawn C
2025-08-26 8:01 ` [v4] " Lee Shawn C
2025-08-27 9:23 ` Imre Deak
2025-08-26 8:13 ` ✗ i915.CI.BAT: failure for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev3) Patchwork
2025-08-26 11:29 ` ✓ i915.CI.BAT: success for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev4) Patchwork
2025-08-26 17:23 ` ✓ i915.CI.Full: " Patchwork
2025-08-28 8:06 ` [PATCH 1/2] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-08-28 8:06 ` [PATCH 2/2] drm/i915: compute pipe bpp from link bandwidth management Lee Shawn C
2025-08-28 14:10 ` Imre Deak
2025-08-28 14:03 ` [PATCH 1/2] drm/i915/hdmi: add debugfs to contorl HDMI bpc Imre Deak
2025-09-01 5:57 ` [PATCH 0/2] drm/i915: control HDMI output bpc Lee Shawn C
2025-09-01 5:57 ` [PATCH 1/2] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-09-01 5:57 ` Lee Shawn C [this message]
2025-09-01 8:30 ` ✓ i915.CI.BAT: success for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev7) Patchwork
2025-09-01 11:12 ` ✓ i915.CI.Full: " Patchwork
2025-09-02 10:55 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250901055721.219995-3-shawn.c.lee@intel.com \
--to=shawn.c.lee@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=uma.shankar@intel.com \
--cc=vidya.srinivas@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).