From: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org,
mitulkumar.ajitkumar.golani@intel.com,
ankit.k.nautiyal@intel.com, uma.shankar@intel.com,
ville.syrjala@linux.intel.com
Subject: [RESEND, 03/22] drm/i915/vrr: Add VRR DC balance registers
Date: Mon, 3 Nov 2025 10:59:43 +0530 [thread overview]
Message-ID: <20251103053002.3002695-4-mitulkumar.ajitkumar.golani@intel.com> (raw)
In-Reply-To: <20251103053002.3002695-1-mitulkumar.ajitkumar.golani@intel.com>
Add VRR register offsets and bits to access DC Balance configuration.
--v2:
- Separate register definitions. (Ankit)
- Remove usage of dev_priv. (Jani, Nikula)
--v3:
- Convert register address offset, from capital to small. (Ankit)
- Move mask bits near to register offsets. (Ankit)
--v4:
- Use _MMIO_TRANS wherever possible. (Jani)
--v5:
- Added LIVE Value registers for VMAX and FLIPLINE as provided by DMC fw
- For pipe B it is temporary and expected to change later once finalised.
--v6:
- Add live value registers for DCB VMAX/FLIPLINE.
--v7:
- Correct commit message file. (Jani Nikula)
- Add bits in highest to lowest order. (Jani Nikula)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
drivers/gpu/drm/i915/display/intel_vrr_regs.h | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_vrr_regs.h b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
index ba9b9215dc11..f828db55d9b2 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
@@ -8,6 +8,74 @@
#include "intel_display_reg_defs.h"
+/* VRR registers */
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A 0x604d4
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B 0x614d4
+#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A, \
+ _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B)
+
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_LIVE_A 0x90700
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_LIVE_B 0x98700
+#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_LIVE(trans) \
+ _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_LIVE_A, \
+ _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_LIVE_B)
+#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_FLIPLINE_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_FLIPLINE(flipline) REG_FIELD_PREP(VRR_DCB_ADJ_FLIPLINE_MASK, \
+ (flipline))
+
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A 0x604d8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B 0x614d8
+#define TRANS_VRR_DCB_ADJ_VMAX_CFG(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_ADJ_VMAX_CFG_A, \
+ _TRANS_VRR_DCB_ADJ_VMAX_CFG_B)
+
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_LIVE_A 0x906F8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_LIVE_B 0x986F8
+#define TRANS_VRR_DCB_ADJ_VMAX_CFG_LIVE(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_ADJ_VMAX_CFG_LIVE_A, \
+ _TRANS_VRR_DCB_ADJ_VMAX_CFG_LIVE_B)
+#define VRR_DCB_ADJ_VMAX_CNT_MASK REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_VMAX_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_VMAX(vmax) REG_FIELD_PREP(VRR_DCB_ADJ_VMAX_MASK, (vmax))
+
+#define _TRANS_VRR_DCB_FLIPLINE_A 0x60418
+#define _TRANS_VRR_DCB_FLIPLINE_B 0x61418
+#define TRANS_VRR_DCB_FLIPLINE(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_FLIPLINE_A, \
+ _TRANS_VRR_DCB_FLIPLINE_B)
+
+#define _TRANS_VRR_DCB_FLIPLINE_LIVE_A 0x906FC
+#define _TRANS_VRR_DCB_FLIPLINE_LIVE_B 0x986FC
+#define TRANS_VRR_DCB_FLIPLINE_LIVE(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_FLIPLINE_LIVE_A, \
+ _TRANS_VRR_DCB_FLIPLINE_LIVE_B)
+#define VRR_DCB_FLIPLINE_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_FLIPLINE(flipline) REG_FIELD_PREP(VRR_DCB_FLIPLINE_MASK, \
+ (flipline))
+
+#define _TRANS_VRR_DCB_VMAX_A 0x60414
+#define _TRANS_VRR_DCB_VMAX_B 0x61414
+#define TRANS_VRR_DCB_VMAX(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_VMAX_A, \
+ _TRANS_VRR_DCB_VMAX_B)
+#define _TRANS_VRR_DCB_VMAX_LIVE_A 0x906F4
+#define _TRANS_VRR_DCB_VMAX_LIVE_B 0x986F4
+#define TRANS_VRR_DCB_VMAX_LIVE(trans) _MMIO_TRANS(trans, \
+ _TRANS_VRR_DCB_VMAX_LIVE_A, \
+ _TRANS_VRR_DCB_VMAX_LIVE_B)
+#define VRR_DCB_VMAX_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_VMAX(vmax) REG_FIELD_PREP(VRR_DCB_VMAX_MASK, (vmax))
+
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A 0x604c0
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B 0x614c0
+#define TRANS_ADAPTIVE_SYNC_DCB_CTL(trans) _MMIO_TRANS(trans, \
+ _TRANS_ADAPTIVE_SYNC_DCB_CTL_A, \
+ _TRANS_ADAPTIVE_SYNC_DCB_CTL_B)
+#define ADAPTIVE_SYNC_COUNTER_EN REG_BIT(31)
+
#define _TRANS_VRR_CTL_A 0x60420
#define _TRANS_VRR_CTL_B 0x61420
#define _TRANS_VRR_CTL_C 0x62420
@@ -19,6 +87,7 @@
#define VRR_CTL_CMRR_ENABLE REG_BIT(27)
#define VRR_CTL_PIPELINE_FULL_MASK REG_GENMASK(10, 3)
#define VRR_CTL_PIPELINE_FULL(x) REG_FIELD_PREP(VRR_CTL_PIPELINE_FULL_MASK, (x))
+#define VRR_CTL_DCB_ADJ_ENABLE REG_BIT(28)
#define VRR_CTL_PIPELINE_FULL_OVERRIDE REG_BIT(0)
#define XELPD_VRR_CTL_VRR_GUARDBAND_MASK REG_GENMASK(15, 0)
#define XELPD_VRR_CTL_VRR_GUARDBAND(x) REG_FIELD_PREP(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, (x))
--
2.48.1
next prev parent reply other threads:[~2025-11-03 5:30 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 5:29 [RESEND, 00/22] Enable/Disable DC balance along with VRR DSB Mitul Golani
2025-11-03 5:29 ` [RESEND, 01/22] drm/i915/display: Add source param for dc balance Mitul Golani
2025-11-03 5:29 ` [RESEND, 02/22] drm/i915/dmc: Add pipe dmc registers and bits for DC Balance Mitul Golani
2025-11-05 4:15 ` Nautiyal, Ankit K
2025-11-03 5:29 ` Mitul Golani [this message]
2025-11-03 9:59 ` [RESEND, 03/22] drm/i915/vrr: Add VRR DC balance registers Jani Nikula
2025-11-05 4:19 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 04/22] drm/i915/vrr: Add functions to read out vmin/vmax stuff Mitul Golani
2025-11-03 5:29 ` [RESEND, 05/22] drm/i915/vrr: Add DC Balance params to crtc_state Mitul Golani
2025-11-05 4:24 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 06/22] drm/i915/vrr: Add state dump for DC Balance params Mitul Golani
2025-11-05 4:25 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 07/22] drm/i915/vrr: Add compute config " Mitul Golani
2025-11-05 4:27 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 08/22] drm/i915/display: Add DC Balance flip counter in crtc Mitul Golani
2025-11-05 4:28 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 09/22] drm/i915/vrr: Increment DC balance flip count on every flip Mitul Golani
2025-11-03 10:01 ` Jani Nikula
2025-11-05 4:51 ` Nautiyal, Ankit K
2025-11-05 6:15 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 10/22] drm/i915/vrr: Add function to reset DC Balance flip count Mitul Golani
2025-11-05 4:52 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 11/22] drm/i915/vrr: Add function reset DC balance accumulated params Mitul Golani
2025-11-05 4:54 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 12/22] drm/i915/vrr: Write DC balance params to hw registers Mitul Golani
2025-11-05 4:56 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 13/22] drm/i915/vrr: Configure DC balance flipline adjustment Mitul Golani
2025-11-05 4:57 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 14/22] drm/i915/vblank: Extract vrr_vblank_start() Mitul Golani
2025-11-03 5:29 ` [RESEND, 15/22] drm/i915/vrr: Implement vblank evasion with DC balancing Mitul Golani
2025-11-03 5:29 ` [RESEND, 16/22] drm/i915/display: Wait for VRR PUSH status update Mitul Golani
2025-11-05 5:59 ` Nautiyal, Ankit K
2025-11-03 5:29 ` [RESEND, 17/22] drm/i915/dsb: Add pipedmc dc balance enable/disable Mitul Golani
2025-11-03 10:02 ` Jani Nikula
2025-11-03 5:29 ` [RESEND, 18/22] drm/i915/vrr: Pause DC Balancing for DSB commits Mitul Golani
2025-11-03 5:29 ` [RESEND, 19/22] drm/i915/display: Add function to configure event for dc balance Mitul Golani
2025-11-05 6:18 ` Nautiyal, Ankit K
2025-11-03 5:30 ` [RESEND, 20/22] drm/i915/vrr: Enable Adaptive sync counter bit Mitul Golani
2025-11-05 6:02 ` Nautiyal, Ankit K
2025-11-03 5:30 ` [RESEND, 21/22] drm/i915/vrr: Enable DC Balance Mitul Golani
2025-11-03 5:30 ` [RESEND, 22/22] drm/i915/vrr: Add function to check if DC Balance Possible Mitul Golani
2025-11-05 6:04 ` Nautiyal, Ankit K
2025-11-03 6:05 ` ✗ Fi.CI.BUILD: failure for Enable/Disable DC balance along with VRR DSB Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103053002.3002695-4-mitulkumar.ajitkumar.golani@intel.com \
--to=mitulkumar.ajitkumar.golani@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=uma.shankar@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).