From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 1/6] drm/i915: Always wait for flip_done, v2.
Date: Fri, 8 Sep 2017 11:08:22 +0200 [thread overview]
Message-ID: <21839dae-0731-5460-0597-32f8cc9dad80@linux.intel.com> (raw)
In-Reply-To: <20170907094936.uoc7ufq7yaj4dw3d@phenom.ffwll.local>
Op 07-09-17 om 11:49 schreef Daniel Vetter:
> On Mon, Sep 04, 2017 at 12:48:33PM +0200, Maarten Lankhorst wrote:
>> The next commit removes the wait for flip_done in in
>> drm_atomic_helper_commit_cleanup_done, but we need it for the tests
>> to pass. Instead of using complicated vblank tracking which ends
>> up being ignored anyway, call the correct atomic helper. :)
>>
>> Changes since v1:
>> - Always call drm_atomic_helper_wait_for_flip_done,
>> even for legacy cursor updates. (danvet)
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 3 +-
>> drivers/gpu/drm/i915/intel_display.c | 84 +++---------------------------------
>> 2 files changed, 8 insertions(+), 79 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 38bd08f2539b..79533ba6f387 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -725,8 +725,7 @@ struct drm_i915_display_funcs {
>> struct drm_atomic_state *old_state);
>> void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
>> struct drm_atomic_state *old_state);
>> - void (*update_crtcs)(struct drm_atomic_state *state,
>> - unsigned int *crtc_vblank_mask);
>> + void (*update_crtcs)(struct drm_atomic_state *state);
>> void (*audio_codec_enable)(struct drm_connector *connector,
>> struct intel_encoder *encoder,
>> const struct drm_display_mode *adjusted_mode);
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 216cd9e0e08f..a6cf1c20c712 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -12136,73 +12136,10 @@ u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
>> return dev->driver->get_vblank_counter(dev, crtc->pipe);
>> }
>>
>> -static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
>> - struct drm_i915_private *dev_priv,
>> - unsigned crtc_mask)
>> -{
>> - unsigned last_vblank_count[I915_MAX_PIPES];
>> - enum pipe pipe;
>> - int ret;
>> -
>> - if (!crtc_mask)
>> - return;
>> -
>> - for_each_pipe(dev_priv, pipe) {
>> - struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv,
>> - pipe);
>> -
>> - if (!((1 << pipe) & crtc_mask))
>> - continue;
>> -
>> - ret = drm_crtc_vblank_get(&crtc->base);
>> - if (WARN_ON(ret != 0)) {
>> - crtc_mask &= ~(1 << pipe);
>> - continue;
>> - }
>> -
>> - last_vblank_count[pipe] = drm_crtc_vblank_count(&crtc->base);
>> - }
>> -
>> - for_each_pipe(dev_priv, pipe) {
>> - struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv,
>> - pipe);
>> - long lret;
>> -
>> - if (!((1 << pipe) & crtc_mask))
>> - continue;
>> -
>> - lret = wait_event_timeout(dev->vblank[pipe].queue,
>> - last_vblank_count[pipe] !=
>> - drm_crtc_vblank_count(&crtc->base),
>> - msecs_to_jiffies(50));
>> -
>> - WARN(!lret, "pipe %c vblank wait timed out\n", pipe_name(pipe));
>> -
>> - drm_crtc_vblank_put(&crtc->base);
>> - }
>> -}
>> -
>> -static bool needs_vblank_wait(struct intel_crtc_state *crtc_state)
>> -{
>> - /* fb updated, need to unpin old fb */
>> - if (crtc_state->fb_changed)
>> - return true;
>> -
>> - /* wm changes, need vblank before final wm's */
>> - if (crtc_state->update_wm_post)
>> - return true;
>> -
>> - if (crtc_state->wm.need_postvbl_update)
>> - return true;
>> -
>> - return false;
>> -}
>> -
>> static void intel_update_crtc(struct drm_crtc *crtc,
>> struct drm_atomic_state *state,
>> struct drm_crtc_state *old_crtc_state,
>> - struct drm_crtc_state *new_crtc_state,
>> - unsigned int *crtc_vblank_mask)
>> + struct drm_crtc_state *new_crtc_state)
>> {
>> struct drm_device *dev = crtc->dev;
>> struct drm_i915_private *dev_priv = to_i915(dev);
>> @@ -12225,13 +12162,9 @@ static void intel_update_crtc(struct drm_crtc *crtc,
>> }
>>
>> drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
>> -
>> - if (needs_vblank_wait(pipe_config))
>> - *crtc_vblank_mask |= drm_crtc_mask(crtc);
>> }
>>
>> -static void intel_update_crtcs(struct drm_atomic_state *state,
>> - unsigned int *crtc_vblank_mask)
>> +static void intel_update_crtcs(struct drm_atomic_state *state)
>> {
>> struct drm_crtc *crtc;
>> struct drm_crtc_state *old_crtc_state, *new_crtc_state;
>> @@ -12242,12 +12175,11 @@ static void intel_update_crtcs(struct drm_atomic_state *state,
>> continue;
>>
>> intel_update_crtc(crtc, state, old_crtc_state,
>> - new_crtc_state, crtc_vblank_mask);
>> + new_crtc_state);
>> }
>> }
>>
>> -static void skl_update_crtcs(struct drm_atomic_state *state,
>> - unsigned int *crtc_vblank_mask)
>> +static void skl_update_crtcs(struct drm_atomic_state *state)
>> {
>> struct drm_i915_private *dev_priv = to_i915(state->dev);
>> struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
>> @@ -12306,7 +12238,7 @@ static void skl_update_crtcs(struct drm_atomic_state *state,
>> vbl_wait = true;
>>
>> intel_update_crtc(crtc, state, old_crtc_state,
>> - new_crtc_state, crtc_vblank_mask);
>> + new_crtc_state);
>>
>> if (vbl_wait)
>> intel_wait_for_vblank(dev_priv, pipe);
>> @@ -12368,7 +12300,6 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>> struct intel_crtc_state *intel_cstate;
>> bool hw_check = intel_state->modeset;
>> u64 put_domains[I915_MAX_PIPES] = {};
>> - unsigned crtc_vblank_mask = 0;
>> int i;
>>
>> intel_atomic_commit_fence_wait(intel_state);
>> @@ -12458,7 +12389,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>> }
>>
>> /* Now enable the clocks, plane, pipe, and connectors that we set up. */
>> - dev_priv->display.update_crtcs(state, &crtc_vblank_mask);
>> + dev_priv->display.update_crtcs(state);
>>
>> /* FIXME: We should call drm_atomic_helper_commit_hw_done() here
>> * already, but still need the state for the delayed optimization. To
>> @@ -12469,8 +12400,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>> * - switch over to the vblank wait helper in the core after that since
>> * we don't need out special handling any more.
>> */
>> - if (!state->legacy_cursor_update)
>> - intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
>> + drm_atomic_helper_wait_for_flip_done(dev, state);
> Superflous if dropped, I'm happy.
Pushed the series, thanks for review. :)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-09-08 9:08 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-04 10:48 [PATCH v2 0/6] drm/atomic: Fix use-after-free with unbound connectors/planes Maarten Lankhorst
2017-09-04 10:48 ` [PATCH v2 1/6] drm/i915: Always wait for flip_done, v2 Maarten Lankhorst
2017-09-07 9:49 ` Daniel Vetter
2017-09-08 9:08 ` Maarten Lankhorst [this message]
2017-09-04 10:48 ` [PATCH v2 2/6] drm/atomic: Move drm_crtc_commit to drm_crtc_state, v3 Maarten Lankhorst
2017-09-04 15:04 ` [PATCH] drm/atomic: Move drm_crtc_commit to drm_crtc_state, v4 Maarten Lankhorst
2017-09-04 18:01 ` kbuild test robot
2017-09-05 6:25 ` Daniel Vetter
2017-09-04 10:48 ` [PATCH v2 3/6] drm/atomic: Remove waits in drm_atomic_helper_commit_cleanup_done, v2 Maarten Lankhorst
2017-09-04 10:48 ` [PATCH v2 4/6] drm/atomic: Return commit in drm_crtc_commit_get for better annotation Maarten Lankhorst
2017-09-07 9:59 ` Daniel Vetter
2017-09-04 10:48 ` [PATCH v2 5/6] drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3 Maarten Lankhorst
2017-09-07 10:05 ` Daniel Vetter
2017-09-07 11:08 ` Maarten Lankhorst
2017-09-04 10:48 ` [PATCH v2 6/6] drm/atomic: Make async plane update checks work as intended, v2 Maarten Lankhorst
[not found] ` <20170904104838.23822-7-maarten.lankhorst-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-09-24 14:33 ` Dmitry Osipenko
[not found] ` <54467116-df02-e6ad-ac14-90aa79e164e4-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-25 6:43 ` [PATCH] drm/atomic: Make async plane update checks actually work as intended Maarten Lankhorst
[not found] ` <a7d5fb04-c2f5-b743-5940-a1bd181d780d-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-09-25 14:08 ` Dmitry Osipenko
2017-09-26 4:59 ` Daniel Vetter
2017-09-04 11:11 ` ✓ Fi.CI.BAT: success for drm/atomic: Fix use-after-free with unbound connectors/planes. (rev2) Patchwork
2017-09-04 12:45 ` ✗ Fi.CI.IGT: failure " Patchwork
2017-09-04 15:23 ` ✓ Fi.CI.BAT: success for drm/atomic: Fix use-after-free with unbound connectors/planes. (rev3) Patchwork
2017-09-04 16:21 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=21839dae-0731-5460-0597-32f8cc9dad80@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox