From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: [RFC PATCH 8/8] drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.
Date: Thu, 20 Jul 2017 18:26:42 +0200 [thread overview]
Message-ID: <44becd41-8461-0c0b-bfc3-2943f8ba4b73@linux.intel.com> (raw)
In-Reply-To: <20170720131519.30104-9-maarten.lankhorst@linux.intel.com>
Op 20-07-17 om 15:15 schreef Maarten Lankhorst:
> The watermarks it should calculate against are the old optimal watermarks.
> The currently active crtc watermarks are pure fiction, and are invalid in
> case of a nonblocking modeset, page flip enabling/disabling planes or any
> other reason.
>
> When the crtc is disabled or during a modeset the intermediate watermarks
> don't need to be programmed separately, and could be directly assigned
> to the optimal watermarks.
>
> CXSR must always be disabled in the intermediate case for modesets, else
> we get a WARN for vblank wait timeout.
>
> Also rename crtc_state to new_crtc_state, to distinguish it from the old state.
>
> Changes since v1:
> - Use intel_atomic_get_old_crtc_state. (ville)
> Changes since v2:
> - Always unset cxsr during modeset.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101597
> ---
> drivers/gpu/drm/i915/intel_pm.c | 22 ++++++++++++++++------
> 1 file changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 0048bf043337..96de4f8e3b2a 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2004,16 +2004,25 @@ static void vlv_atomic_update_fifo(struct intel_atomic_state *state,
>
> static int vlv_compute_intermediate_wm(struct drm_device *dev,
> struct intel_crtc *crtc,
> - struct intel_crtc_state *crtc_state)
> + struct intel_crtc_state *new_crtc_state)
> {
> - struct vlv_wm_state *intermediate = &crtc_state->wm.vlv.intermediate;
> - const struct vlv_wm_state *optimal = &crtc_state->wm.vlv.optimal;
> - const struct vlv_wm_state *active = &crtc->wm.active.vlv;
> + struct vlv_wm_state *intermediate = &new_crtc_state->wm.vlv.intermediate;
> + const struct vlv_wm_state *optimal = &new_crtc_state->wm.vlv.optimal;
> + const struct intel_crtc_state *old_crtc_state =
> + intel_atomic_get_old_crtc_state(new_crtc_state->base.state, crtc);
> + const struct vlv_wm_state *active = &old_crtc_state->wm.vlv.optimal;
> int level;
>
> + if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
> + *intermediate = *optimal;
> +
> + intermediate->cxsr = false;
> + goto out;
> + }
Derp, can't fix the above bug since it's PNV.. But still needs to be done here.
So I'll have to take out the bugzilla listed above..
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-07-20 16:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-20 13:15 [PATCH 0/8] drm/i915: Stop using get_existing_state Maarten Lankhorst
2017-07-20 13:15 ` [PATCH 1/8] drm/i915: Change use get_new_plane_state instead of existing plane state Maarten Lankhorst
2017-08-01 6:36 ` Mahesh Kumar
2017-08-01 7:55 ` Maarten Lankhorst
2017-07-20 13:15 ` [PATCH 2/8] drm/i915: Change get_existing_crtc_state to old state Maarten Lankhorst
2017-08-01 6:46 ` Mahesh Kumar
2017-08-01 7:53 ` Maarten Lankhorst
2017-08-01 8:04 ` Mahesh Kumar
2017-07-20 13:15 ` [PATCH 3/8] drm/i915: Use new atomic helpers in intel_plane_atomic_check Maarten Lankhorst
2017-08-01 7:57 ` Mahesh Kumar
2017-07-20 13:15 ` [PATCH 4/8] drm/i915: Use intel_atomic_get_new_crtc_state in intel_fbc.c Maarten Lankhorst
2017-08-01 8:00 ` Mahesh Kumar
2017-07-20 13:15 ` [PATCH 5/8] drm/i915: Remove last references to drm_atomic_get_existing* macros Maarten Lankhorst
2017-07-20 13:15 ` [PATCH 6/8] drm/i915: Do not update legacy state any more Maarten Lankhorst
2017-07-20 13:15 ` [RFC PATCH 7/8] drm/i915: Calculate ironlake intermediate watermarks correctly, v2 Maarten Lankhorst
2017-07-20 13:15 ` [RFC PATCH 8/8] drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3 Maarten Lankhorst
2017-07-20 16:26 ` Maarten Lankhorst [this message]
2017-07-20 15:40 ` ✓ Fi.CI.BAT: success for drm/i915: Stop using get_existing_state Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44becd41-8461-0c0b-bfc3-2943f8ba4b73@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox