[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38.2-kape (knut@linux-iffr) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #6 PREEMPT Sun Apr 3 17:09:30 CEST 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable) [ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: /i915GMm-HFS, BIOS 6.00 PG 11/04/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f7f0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-F7FFF uncachable [ 0.000000] F8000-FBFFF write-through [ 0.000000] FC000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000 [ 0.000000] RAMDISK: 3768f000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 36d2e000 - 3768ed1e [ 0.000000] Move RAMDISK from 000000003768f000 - 0000000037fefd1d to 36d2e000 - 3768ed1d [ 0.000000] ACPI: RSDP 000f9320 00014 (v00 AOpen ) [ 0.000000] ACPI: RSDT 7f7f3040 00038 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7f7f30c0 00074 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7f7f3180 042E3 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7f7f0000 00040 [ 0.000000] ACPI: MCFG 7f7f7580 0003C (v01 AOpen AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 7f7f74c0 0005A (v01 AOpen AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 7f7f7600 00222 (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 7f7f7a00 000E0 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f7f0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f7f0 [ 0.000000] On node 0 totalpages: 522111 [ 0.000000] free_area_init_node: node 0, pgdat c06b1f7c, node_mem_map f5d3e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2304 pages used for memmap [ 0.000000] HighMem zone: 292594 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518031 [ 0.000000] Kernel command line: root=/dev/hda2 acpi_enforce_resources=lax [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7f0) [ 0.000000] Memory: 2050032k/2088896k available (3573k kernel code, 38412k reserved, 2275k data, 340k init, 1179592k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc06b7000 - 0xc070c000 ( 340 kB) [ 0.000000] .data : 0xc047d6df - 0xc06b6500 (2275 kB) [ 0.000000] .text : 0xc0100000 - 0xc047d6df (3573 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 1995.804 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.60 BogoMIPS (lpj=7983216) [ 0.012005] pid_max: default: 32768 minimum: 301 [ 0.012226] Security Framework initialized [ 0.012393] AppArmor: AppArmor initialized [ 0.012569] Mount-cache hash table entries: 512 [ 0.013796] mce: CPU supports 5 MCE banks [ 0.013938] CPU0: Thermal monitoring enabled (TM1) [ 0.014084] CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 [ 0.014692] ACPI: Core revision 20110112 [ 0.028108] Performance Events: p6 PMU driver. [ 0.028290] ... version: 0 [ 0.028423] ... bit width: 32 [ 0.028554] ... generic registers: 2 [ 0.028686] ... value mask: 00000000ffffffff [ 0.028822] ... max period: 000000007fffffff [ 0.028959] ... fixed-purpose events: 0 [ 0.029092] ... event mask: 0000000000000003 [ 0.029593] NMI watchdog enabled, takes one hw-pmu counter. [ 0.029771] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.030287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072003] devtmpfs: initialized [ 0.072003] NET: Registered protocol family 16 [ 0.072003] ACPI: bus type pci registered [ 0.072003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.072003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.072003] PCI: Using MMCONFIG for extended config space [ 0.072003] PCI: Using configuration type 1 for base access [ 0.074996] bio: create slab at 0 [ 0.079276] ACPI: EC: Look up EC in DSDT [ 0.089409] ACPI: Interpreter enabled [ 0.089542] ACPI: (supports S0 S5) [ 0.089733] ACPI: Using IOAPIC for interrupt routing [ 0.099841] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.100198] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.100741] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.100745] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.100749] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.100752] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.100756] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfebfffff] (ignored) [ 0.100807] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600 [ 0.100927] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300 [ 0.100944] pci 0000:00:02.0: reg 10: [mem 0xd0380000-0xd03fffff] [ 0.100955] pci 0000:00:02.0: reg 14: [io 0xe000-0xe007] [ 0.100966] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] [ 0.100976] pci 0000:00:02.0: reg 1c: [mem 0xd0400000-0xd043ffff] [ 0.101031] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380 [ 0.101047] pci 0000:00:02.1: reg 10: [mem 0xd0300000-0xd037ffff] [ 0.101178] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403 [ 0.101201] pci 0000:00:1b.0: reg 10: [mem 0xd0440000-0xd0443fff 64bit] [ 0.101285] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.101291] pci 0000:00:1b.0: PME# disabled [ 0.101320] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604 [ 0.101405] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.101410] pci 0000:00:1c.0: PME# disabled [ 0.101440] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604 [ 0.101524] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.101530] pci 0000:00:1c.1: PME# disabled [ 0.101559] pci 0000:00:1c.2: [8086:2664] type 1 class 0x000604 [ 0.101644] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.101649] pci 0000:00:1c.2: PME# disabled [ 0.101678] pci 0000:00:1c.3: [8086:2666] type 1 class 0x000604 [ 0.101763] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.101769] pci 0000:00:1c.3: PME# disabled [ 0.101802] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03 [ 0.101862] pci 0000:00:1d.0: reg 20: [io 0xe100-0xe11f] [ 0.101905] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03 [ 0.101964] pci 0000:00:1d.1: reg 20: [io 0xe200-0xe21f] [ 0.102007] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03 [ 0.102066] pci 0000:00:1d.2: reg 20: [io 0xe300-0xe31f] [ 0.102109] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03 [ 0.102168] pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f] [ 0.102222] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03 [ 0.102246] pci 0000:00:1d.7: reg 10: [mem 0xd0444000-0xd04443ff] [ 0.102340] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.102346] pci 0000:00:1d.7: PME# disabled [ 0.102368] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.102447] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601 [ 0.102579] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.102589] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO [ 0.102837] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH6 GPIO [ 0.102980] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff [ 0.103121] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f [ 0.103279] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101 [ 0.103297] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.103311] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.103324] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.103338] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.103351] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f] [ 0.103402] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101 [ 0.103423] pci 0000:00:1f.2: reg 10: [io 0xe500-0xe507] [ 0.103436] pci 0000:00:1f.2: reg 14: [io 0xe600-0xe603] [ 0.103448] pci 0000:00:1f.2: reg 18: [io 0xe700-0xe707] [ 0.103461] pci 0000:00:1f.2: reg 1c: [io 0xe800-0xe803] [ 0.103473] pci 0000:00:1f.2: reg 20: [io 0xe900-0xe90f] [ 0.103486] pci 0000:00:1f.2: reg 24: [mem 0xd0445000-0xd04453ff] [ 0.103520] pci 0000:00:1f.2: PME# supported from D3hot [ 0.103525] pci 0000:00:1f.2: PME# disabled [ 0.103544] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05 [ 0.103614] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f] [ 0.103718] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.103856] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.103862] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.103872] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) [ 0.104054] pci 0000:02:00.0: [11ab:4362] type 0 class 0x000200 [ 0.104086] pci 0000:02:00.0: reg 10: [mem 0xd0020000-0xd0023fff 64bit] [ 0.104103] pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff] [ 0.104161] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.104214] pci 0000:02:00.0: supports D1 D2 [ 0.104217] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104224] pci 0000:02:00.0: PME# disabled [ 0.104243] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.104596] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.104735] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.104741] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff] [ 0.104749] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.104853] pci 0000:03:00.0: [11ab:4362] type 0 class 0x000200 [ 0.104884] pci 0000:03:00.0: reg 10: [mem 0xd0120000-0xd0123fff 64bit] [ 0.104901] pci 0000:03:00.0: reg 18: [io 0xd000-0xd0ff] [ 0.104959] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.105012] pci 0000:03:00.0: supports D1 D2 [ 0.105015] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.105022] pci 0000:03:00.0: PME# disabled [ 0.105039] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.105299] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.105437] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.105443] pci 0000:00:1c.2: bridge window [mem 0xd0100000-0xd01fffff] [ 0.105452] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.105513] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.105653] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) [ 0.105659] pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.105668] pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff pref] (disabled) [ 0.105723] pci 0000:05:03.0: [11c1:5811] type 0 class 0x000c00 [ 0.105747] pci 0000:05:03.0: reg 10: [mem 0xd0200000-0xd0200fff] [ 0.105843] pci 0000:05:03.0: supports D1 D2 [ 0.105846] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.105905] pci 0000:05:03.0: PME# disabled [ 0.105968] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.106112] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.106118] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff] [ 0.106126] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.106130] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.106134] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.106167] pci_bus 0000:00: on NUMA node 0 [ 0.106173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.106583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.106685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.106785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.106886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.106985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.107377] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.132703] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.133222] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.133737] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.134254] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.134771] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.135303] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.135965] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.136617] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.137478] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.137753] vgaarb: loaded [ 0.138078] SCSI subsystem initialized [ 0.138321] libata version 3.00 loaded. [ 0.138391] usbcore: registered new interface driver usbfs [ 0.138555] usbcore: registered new interface driver hub [ 0.138745] usbcore: registered new device driver usb [ 0.139045] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.139185] PCI: Using ACPI for IRQ routing [ 0.139321] PCI: pci_cache_line_size set to 64 bytes [ 0.139470] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.139475] reserve RAM buffer: 000000007f7f0000 - 000000007fffffff [ 0.140084] hpet clockevent registered [ 0.140090] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.140235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.140458] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.144224] Switching to clocksource hpet [ 0.144832] AppArmor: AppArmor Filesystem Enabled [ 0.144999] pnp: PnP ACPI init [ 0.145157] ACPI: bus type pnp registered [ 0.145429] pnp 00:00: [bus 00-ff] [ 0.145433] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.145437] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.145440] pnp 00:00: [io 0x0d00-0xffff window] [ 0.145443] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.145446] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.145450] pnp 00:00: [mem 0x7f800000-0xfebfffff window] [ 0.145555] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.145679] pnp 00:01: [io 0x0010-0x001f] [ 0.145682] pnp 00:01: [io 0x0022-0x003f] [ 0.145685] pnp 00:01: [io 0x0044-0x005f] [ 0.145688] pnp 00:01: [io 0x0062-0x0063] [ 0.145691] pnp 00:01: [io 0x0065-0x006f] [ 0.145694] pnp 00:01: [io 0x0074-0x007f] [ 0.145697] pnp 00:01: [io 0x0091-0x0093] [ 0.145699] pnp 00:01: [io 0x00a2-0x00bf] [ 0.145702] pnp 00:01: [io 0x00e0-0x00ef] [ 0.145705] pnp 00:01: [io 0x0b78-0x0b7b] [ 0.145708] pnp 00:01: [io 0x0f78-0x0f7b] [ 0.145711] pnp 00:01: [io 0x0a78-0x0a7b] [ 0.145714] pnp 00:01: [io 0x0e78-0x0e7b] [ 0.145716] pnp 00:01: [io 0x0bbc-0x0bbf] [ 0.145719] pnp 00:01: [io 0x0fbc-0x0fbf] [ 0.145722] pnp 00:01: [io 0x04d0-0x04d1] [ 0.145725] pnp 00:01: [io 0x0290-0x0297] [ 0.145728] pnp 00:01: [io 0x0880-0x088f] [ 0.145870] system 00:01: [io 0x0b78-0x0b7b] has been reserved [ 0.146011] system 00:01: [io 0x0f78-0x0f7b] has been reserved [ 0.146149] system 00:01: [io 0x0a78-0x0a7b] has been reserved [ 0.146289] system 00:01: [io 0x0e78-0x0e7b] has been reserved [ 0.146429] system 00:01: [io 0x0bbc-0x0bbf] has been reserved [ 0.146567] system 00:01: [io 0x0fbc-0x0fbf] has been reserved [ 0.146707] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.146845] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.146985] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.147127] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.147156] pnp 00:02: [dma 4] [ 0.147161] pnp 00:02: [io 0x0000-0x000f] [ 0.147164] pnp 00:02: [io 0x0080-0x0090] [ 0.147167] pnp 00:02: [io 0x0094-0x009f] [ 0.147170] pnp 00:02: [io 0x00c0-0x00df] [ 0.147227] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.147254] pnp 00:03: [io 0x0070-0x0073] [ 0.147267] pnp 00:03: [irq 8] [ 0.147325] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.147345] pnp 00:04: [io 0x0061] [ 0.147405] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.147425] pnp 00:05: [io 0x00f0-0x00ff] [ 0.147435] pnp 00:05: [irq 13] [ 0.147493] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.147865] pnp 00:06: [io 0x03f8-0x03ff] [ 0.147874] pnp 00:06: [irq 4] [ 0.147970] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.147970] Switched to NOHz mode on CPU #0 [ 0.148130] pnp 00:07: [io 0x02f8-0x02ff] [ 0.148139] pnp 00:07: [irq 3] [ 0.148234] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.148732] pnp 00:08: [io 0x0378-0x037f] [ 0.148735] pnp 00:08: [io 0x0778-0x077b] [ 0.148743] pnp 00:08: [irq 7] [ 0.148840] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.149007] pnp 00:09: [io 0x0060] [ 0.149010] pnp 00:09: [io 0x0064] [ 0.149018] pnp 00:09: [irq 1] [ 0.149082] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.149154] pnp 00:0a: [io 0x4000-0x40bf] [ 0.149266] system 00:0a: [io 0x4000-0x40bf] could not be reserved [ 0.149409] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.149451] pnp 00:0b: [mem 0xffb80000-0xffbfffff] [ 0.149519] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) [ 0.150011] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.150153] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.150296] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150572] pnp 00:0d: [mem 0x000d0000-0x000d3fff] [ 0.150575] pnp 00:0d: [mem 0x000db800-0x000dbfff] [ 0.150578] pnp 00:0d: [mem 0x000f0000-0x000fbfff] [ 0.150581] pnp 00:0d: [mem 0x000fc000-0x000fffff] [ 0.150584] pnp 00:0d: [mem 0x7f7f0000-0x7f7fffff] [ 0.150587] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.150591] pnp 00:0d: [mem 0x00100000-0x7f7effff] [ 0.150594] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.150597] pnp 00:0d: [mem 0xfed13000-0xfed1dfff] [ 0.150600] pnp 00:0d: [mem 0xfed20000-0xfed8ffff] [ 0.150605] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.150608] pnp 00:0d: [mem 0xffb00000-0xffb7ffff] [ 0.150611] pnp 00:0d: [mem 0xfff00000-0xffffffff] [ 0.150614] pnp 00:0d: [mem 0x000e0000-0x000effff] [ 0.150770] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.150913] system 00:0d: [mem 0x000db800-0x000dbfff] has been reserved [ 0.151053] system 00:0d: [mem 0x000f0000-0x000fbfff] could not be reserved [ 0.151196] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.151338] system 00:0d: [mem 0x7f7f0000-0x7f7fffff] could not be reserved [ 0.151481] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.151623] system 00:0d: [mem 0x00100000-0x7f7effff] could not be reserved [ 0.154692] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.154833] system 00:0d: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.154975] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.155115] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.155256] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.155397] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved [ 0.155539] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved [ 0.155681] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.155703] pnp: PnP ACPI: found 14 devices [ 0.155837] ACPI: ACPI bus type pnp unregistered [ 0.194031] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff] [ 0.194175] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.194420] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff pref] [ 0.194665] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff pref] [ 0.194907] pci 0000:00:1c.3: BAR 8: assigned [mem 0x80800000-0x809fffff] [ 0.195049] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80bfffff 64bit pref] [ 0.195293] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.195434] pci 0000:00:1c.3: BAR 7: assigned [io 0x2000-0x2fff] [ 0.195572] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.195710] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.195852] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 0.195996] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.196253] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041ffff pref] [ 0.196494] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.196632] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.196774] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff] [ 0.196917] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff pref] [ 0.197162] pci 0000:03:00.0: BAR 6: assigned [mem 0x80600000-0x8061ffff pref] [ 0.197405] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.197541] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.197684] pci 0000:00:1c.2: bridge window [mem 0xd0100000-0xd01fffff] [ 0.197826] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff pref] [ 0.198074] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.198211] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.198354] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff] [ 0.198496] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80bfffff 64bit pref] [ 0.198745] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.198883] pci 0000:00:1e.0: bridge window [io disabled] [ 0.199026] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff] [ 0.199168] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.199318] pci 0000:00:1c.0: enabling device (0100 -> 0103) [ 0.199467] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.199611] pci 0000:00:1c.0: setting latency timer to 64 [ 0.199624] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.199763] pci 0000:00:1c.1: setting latency timer to 64 [ 0.199776] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.199915] pci 0000:00:1c.2: setting latency timer to 64 [ 0.199924] pci 0000:00:1c.3: enabling device (0100 -> 0103) [ 0.200073] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.200213] pci 0000:00:1c.3: setting latency timer to 64 [ 0.200223] pci 0000:00:1e.0: setting latency timer to 64 [ 0.200228] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.200232] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.200235] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.200238] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff] [ 0.200242] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.200245] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.200249] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff] [ 0.200252] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff pref] [ 0.200255] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.200259] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.200262] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff pref] [ 0.200265] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.200268] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff] [ 0.200272] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref] [ 0.200275] pci_bus 0000:05: resource 1 [mem 0xd0200000-0xd02fffff] [ 0.200279] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.200282] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff] [ 0.200374] NET: Registered protocol family 2 [ 0.200732] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.201561] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.202954] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 0.209849] TCP: Hash tables configured (established 131072 bind 65536) [ 0.210075] TCP reno registered [ 0.210221] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.210471] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.210982] NET: Registered protocol family 1 [ 0.211172] pci 0000:00:02.0: Boot video device [ 1.808017] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 1.808204] PCI: CLS 32 bytes, default 64 [ 1.808516] Unpacking initramfs... [ 2.121331] Freeing initrd memory: 9604k freed [ 2.130305] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20 [ 2.130686] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.131184] audit: initializing netlink socket (disabled) [ 2.131383] type=2000 audit(1302179156.124:1): initialized [ 2.155236] highmem bounce pool size: 64 pages [ 2.155375] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.155777] VFS: Disk quotas dquot_6.5.2 [ 2.155979] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.156752] fuse init (API version 7.16) [ 2.156999] msgmni has been set to 1718 [ 2.157430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.157692] io scheduler noop registered [ 2.157826] io scheduler deadline registered [ 2.157992] io scheduler cfq registered (default) [ 2.158390] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.158488] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 2.158586] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.158640] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 2.158733] pcieport 0000:00:1c.2: setting latency timer to 64 [ 2.158787] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 2.158884] pcieport 0000:00:1c.3: setting latency timer to 64 [ 2.158938] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 2.159393] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.159703] ACPI: Power Button [PWRB] [ 2.159980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.160257] ACPI: Power Button [PWRF] [ 2.160668] ACPI: Fan [FAN] (on) [ 2.160907] ACPI: acpi_idle registered with cpuidle [ 2.161103] ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points [ 2.161348] ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points [ 2.161589] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling [ 2.162617] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.162755] ACPI: Thermal Zone [THRM] (62 C) [ 2.163008] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled [ 2.183620] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.204297] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.225908] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.246554] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.252124] lp: driver loaded but no devices found [ 2.252435] Non-volatile memory driver v1.3 [ 2.252569] Linux agpgart interface v0.103 [ 2.252814] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 2.253036] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 2.253865] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 2.254269] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 2.254508] [drm] Initialized drm 1.1.0 20060810 [ 2.254667] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.254807] i915 0000:00:02.0: setting latency timer to 64 [ 2.260323] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.260468] [drm] Driver supports precise vblank timestamp query. [ 3.109357] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.110124] [drm] initialized overlay support [ 3.128101] Refined TSC clocksource calibration: 1995.764 MHz. [ 3.128245] Switching to clocksource tsc [ 3.603599] Console: switching to colour frame buffer device 160x64 [ 3.610089] fb0: inteldrmfb frame buffer device [ 3.610128] drm: registered panic notifier [ 3.610359] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.610842] parport_pc 00:08: reported by Plug and Play ACPI [ 3.610987] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 3.708482] lp0: using parport0 (interrupt-driven). [ 3.710054] loop: module loaded [ 3.710084] Uniform Multi-Platform E-IDE driver [ 3.710204] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04) [ 3.710276] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.710427] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 3.710490] ide0: BM-DMA at 0xf000-0xf007 [ 3.710536] ide1: BM-DMA at 0xf008-0xf00f [ 3.710578] Probing IDE interface ide0... [ 3.996210] hda: FUJITSU MHV2080AT, ATA DISK drive [ 4.668147] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.673023] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 4.673091] hda: UDMA/33 mode selected [ 4.677733] Probing IDE interface ide1... [ 5.244109] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.272863] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.273142] ide-gd driver 1.18 [ 5.273255] hda: max request size: 128KiB [ 5.273424] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63 [ 5.278152] hda: cache flushes supported [ 5.293518] hda: hda1 hda2 [ 5.294280] ide-cd driver 5.00 [ 5.294562] ata_piix 0000:00:1f.2: version 2.13 [ 5.294579] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.294644] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 5.294805] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 5.295635] scsi0 : ata_piix [ 5.295959] scsi1 : ata_piix [ 5.296083] ata1: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe900 irq 19 [ 5.296144] ata2: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xe908 irq 19 [ 5.296281] sky2: driver version 1.28 [ 5.296348] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.296415] sky2 0000:02:00.0: setting latency timer to 64 [ 5.296440] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 [ 5.296622] sky2 0000:02:00.0: irq 44 for MSI/MSI-X [ 5.297629] sky2 0000:02:00.0: eth0: addr 00:01:80:62:cf:b1 [ 5.297698] sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.297764] sky2 0000:03:00.0: setting latency timer to 64 [ 5.297788] sky2 0000:03:00.0: Yukon-2 EC chip revision 2 [ 5.297942] sky2 0000:03:00.0: irq 45 for MSI/MSI-X [ 5.298538] sky2 0000:03:00.0: eth1: addr 00:01:80:62:cf:b2 [ 5.298676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.298781] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.301308] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.301313] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.303782] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.310082] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.310100] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0444000 [ 5.328013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.330464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.332787] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.335086] usb usb1: Product: EHCI Host Controller [ 5.337396] usb usb1: Manufacturer: Linux 2.6.38.2-kape ehci_hcd [ 5.339693] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.342765] hub 1-0:1.0: USB hub found [ 5.345101] hub 1-0:1.0: 8 ports detected [ 5.347653] uhci_hcd: USB Universal Host Controller Interface driver [ 5.349983] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.352270] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.352275] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.354551] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.356858] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 5.359204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.361470] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.363727] usb usb2: Product: UHCI Host Controller [ 5.365963] usb usb2: Manufacturer: Linux 2.6.38.2-kape uhci_hcd [ 5.368210] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.370649] hub 2-0:1.0: USB hub found [ 5.372866] hub 2-0:1.0: 2 ports detected [ 5.375169] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.377398] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.377402] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.379603] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.381850] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 5.384109] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.386296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.388492] usb usb3: Product: UHCI Host Controller [ 5.390666] usb usb3: Manufacturer: Linux 2.6.38.2-kape uhci_hcd [ 5.392859] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.395280] hub 3-0:1.0: USB hub found [ 5.397488] hub 3-0:1.0: 2 ports detected [ 5.399742] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.401933] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.401937] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.404106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.406347] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 5.408590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.410766] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.412958] usb usb4: Product: UHCI Host Controller [ 5.415117] usb usb4: Manufacturer: Linux 2.6.38.2-kape uhci_hcd [ 5.417325] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.419716] hub 4-0:1.0: USB hub found [ 5.421932] hub 4-0:1.0: 2 ports detected [ 5.424193] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 5.426377] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.426382] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.428570] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.430805] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 5.433059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.435257] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.437467] usb usb5: Product: UHCI Host Controller [ 5.439680] usb usb5: Manufacturer: Linux 2.6.38.2-kape uhci_hcd [ 5.441895] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.444543] hub 5-0:1.0: USB hub found [ 5.446748] hub 5-0:1.0: 2 ports detected [ 5.449079] usbcore: registered new interface driver usblp [ 5.451274] Initializing USB Mass Storage driver... [ 5.453551] usbcore: registered new interface driver usb-storage [ 5.455784] USB Mass Storage support registered. [ 5.468775] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.471025] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.474186] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.487648] mousedev: PS/2 mouse device common for all mice [ 5.490713] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.493316] rtc_cmos 00:03: RTC can wake from S4 [ 5.495894] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.498361] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 5.500773] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.503256] w83627hf: w83627hf: Found W83627THF chip at 0x290 [ 5.505621] ACPI: resource w83627hf [io 0x0295-0x0296] conflicts with ACPI region SEN1 [io 0x295-0x296] [ 5.508052] ACPI: This conflict may cause random problems and system instability [ 5.510462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.513472] device-mapper: uevent: version 1.0.3 [ 5.516135] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 5.518710] cpuidle: using governor ladder [ 5.521506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.524285] cpuidle: using governor menu [ 5.527384] usbcore: registered new interface driver usbhid [ 5.529952] usbhid: USB HID core driver [ 5.543570] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.546291] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 5.546320] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.579180] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 [ 5.585778] usbcore: registered new interface driver snd-usb-audio [ 5.588450] ALSA device list: [ 5.591118] #0: Virtual MIDI Card 1 [ 5.593770] #1: HDA Intel at 0xd0440000 irq 46 [ 5.597270] TCP cubic registered [ 5.600755] Using IPI Shortcut mode [ 5.603565] registered taskstats version 1 [ 5.606686] rtc_cmos 00:03: setting system clock to 2011-04-07 12:26:00 UTC (1302179160) [ 5.609482] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 5.612580] Freeing unused kernel memory: 340k freed [ 5.615686] Write protecting the kernel text: 3576k [ 5.618501] Write protecting the kernel read-only data: 1720k [ 5.712281] udev: starting version 157 [ 5.714872] udevd (62): /proc/62/oom_adj is deprecated, please use /proc/62/oom_score_adj instead. [ 6.020113] Marking TSC unstable due to cpufreq changes [ 6.022712] Switching to clocksource hpet [ 6.340958] REISERFS (device hda2): found reiserfs format "3.6" with standard journal [ 6.343686] REISERFS (device hda2): using ordered data mode [ 6.346758] REISERFS (device hda2): journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 6.352701] REISERFS (device hda2): checking transaction log (hda2) [ 6.403950] REISERFS (device hda2): Using r5 hash to sort names [ 12.816331] udev: starting version 157 [ 14.686478] Adding 4192252k swap on /dev/hda1. Priority:-1 extents:1 across:4192252k [ 19.055113] NET: Registered protocol family 10 [ 19.216808] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 19.512897] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.692555] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 23.680436] sky2 0000:02:00.0: eth0: enabling interface [ 23.682626] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.794633] NET: Registered protocol family 17 [ 26.043505] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 26.048802] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.904025] eth0: no IPv6 routers present [ 40.497487] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:01:80:62:cf:b1:00:01:80:62:25:4b:08:00 SRC=192.168.22.15 DST=192.168.22.31 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=51545 DF PROTO=TCP SPT=41188 DPT=22 WINDOW=14600 RES=0x00 SYN URGP=0 OPT (020405B40402080A01039D7B0000000001030306) [ 47.851157] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:01:80:62:cf:b1:00:01:80:62:25:4b:08:00 SRC=192.168.22.15 DST=192.168.22.31 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=45535 DF PROTO=TCP SPT=41189 DPT=22 WINDOW=14600 RES=0x00 SYN URGP=0 OPT (020405B40402080A0103A4AA0000000001030306) [ 58.472050] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 58.646451] usb 2-2: New USB device found, idVendor=046d, idProduct=c50e [ 58.646462] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 58.646470] usb 2-2: Product: USB RECEIVER [ 58.646477] usb 2-2: Manufacturer: Logitech [ 58.675280] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 [ 58.678731] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2/input0 [ 126.796028] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 126.806913] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 2211 at 2209, next 2212) [ 133.824072] usb 2-2: USB disconnect, address 2