From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chun-Yu Shei Subject: Re: Problems w/Sandy Bridge & 27" monitor Date: Mon, 27 Aug 2012 15:50:27 -0400 Message-ID: <503BCF83.8090609@cs.indiana.edu> References: <502C24D2.7070506@cs.indiana.edu> <20120815224757.GG5533@phenom.ffwll.local> <503BC0DE.2030101@cs.indiana.edu> <20120827190814.GD5376@phenom.ffwll.local> <503BCAD2.7020504@cs.indiana.edu> <20120827193252.GE5376@phenom.ffwll.local> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from newman.cs.indiana.edu (newman.cs.indiana.edu [129.79.247.4]) by gabe.freedesktop.org (Postfix) with ESMTP id 669689F066 for ; Mon, 27 Aug 2012 12:50:33 -0700 (PDT) In-Reply-To: <20120827193252.GE5376@phenom.ffwll.local> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: Daniel Vetter Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org On 08/27/2012 03:32 PM, Daniel Vetter wrote: > On Mon, Aug 27, 2012 at 03:30:26PM -0400, Chun-Yu Shei wrote: >> On 08/27/2012 03:08 PM, Daniel Vetter wrote: >>> On Mon, Aug 27, 2012 at 02:47:58PM -0400, Chun-Yu Shei wrote: >>>> On 8/15/2012 6:47 PM, Daniel Vetter wrote: >>>>> On Wed, Aug 15, 2012 at 06:38:10PM -0400, Chun-Yu Shei wrote: >>>>>> Hi, >>>>>> >>>>>> I recently upgraded to a 27" monitor (2560x1440) from a 23" one >>>>>> (1920x1080), and had to switch to Windows because the new monitor is >>>>>> unusable in Linux. Today, about a month later, I decided to give >>>>>> Linux another try, since there have been several updates to the >>>>>> Intel graphics driver since then. >>>>>> >>>>>> Unfortunately, it seems that it's still unusable with >>>>>> xf86-video-intel 2.20.3 -- after a little while, the video signal to >>>>>> the 27" monitor completely stops, and it goes into power saving >>>>>> mode. I'm running dual monitors with the old 23", and that one >>>>>> continues running fine when this happens. This happens on my >>>>>> ThinkPad X220 (i5-2540M). The 27" is connected via DisplayPort, and >>>>>> the 23" via DVI. SNA is enabled, if it makes any difference (I >>>>>> haven't tried turning it off, but I probably should). This is the >>>>>> biggest problem I'm facing when it comes to Linux support. >>>>>> >>>>>> I also gave the new "TearFree" option a try, and while it does a >>>>>> great job of eliminating tearing, it makes the two monitors become >>>>>> mirrors of each other for some reason. If I take a screenshot with >>>>>> the GNOME tool, the screenshot comes out as expected (unmirrored), >>>>>> but the video output on the two monitors is mirrored in reality. >>>>>> Disabling "TearFree" fixes this. >>>>>> >>>>>> Also, when I'm using the ThinkPad's built-in display, it sometimes >>>>>> turns off for no apparent reason, although it's not too big of a >>>>>> deal since a suspend/resume cycle seems to fix things (and I haven't >>>>>> used 2.20.3 long enough to experience this yet). >>>>>> >>>>>> Any ideas/things I can do to help track these issues down? >>>>> >>>>> For the screen blanking issues, the kernel is the important part. Please >>>>> boot with drm.debug=0xe added to your kernel bootline and grab the full >>>>> dmesg. >>>>> -Daniel >>>>> >>>> >>>> OK, I finally got around to doing this... I just upgraded to the >>>> 3.5.3 kernel and xf86-video-intel 2.20.5 as well. >>>> >>>> Here's the initial dmesg upon bootup: http://pastebin.com/41F2AA0f >>>> >>>> And here's the dmesg right after the 27" goes blank: >>>> http://pastebin.com/3CTRETQ4 (not completely blank, though... there >>>> are a few lines at the very left & top edge of the display) >>>> >>>> A few seconds later, the display came back, and here's the dmesg >>>> right after that: http://pastebin.com/9mdfY5P1 >>> >>> Hm, there's nothing really interesting with that screen going on ... Also, >>> 3.5.3 is up-to-date with all recent DP fixes. One thing that could be is >>> that this is another version of our fdi link training woes on ivb. >>> >>> To check for that, can you please run your 27" screen at a much lower >>> resolution? If it still blanks out, it's a different issue. >>> >>> Thanks, Daniel >>> >> >> Seems to be working perfectly at 1600x900 (btw, I'm on Sandy Bridge, >> not ivb). > > Hm ... I'm running low on ideas to try out then. Can you please file a bug > report on bugs.freedesktop.org against drm/intel? > > Thanks, Daniel > Will do... I did a little more experimenting, and things seem to be fine at 1920x1440, but 2048x1152 starts to show the same screen blanking problem. Chun-Yu