On 10/14/2012 04:58 AM, Daniel Vetter wrote:
> On Sat, Oct 13, 2012 at 9:17 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote:
>> One other thing I failed to mention. If i connect the TV HDMI to the Intel
>> boards DVI port using the adapter, at power up I get all the BIOS messages
>> and can enter the BIOS and all is fine. But when I let it boot all the way
>> up like this, I get nothing but "no signal" after leaving BIOS mode. Turning
>> the tv on/off, cable plug/unplug does not help.
>
> Can you please boot in that configuration on latest kernel with
> drm.debug=0xe added to your kernel cmdline and then attach the
> complete dmesg?

Hi Daniel,

cat /proc/cmdline
root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 
video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal 
drm.debug=0xe

dmesg is attached

Mark