From: Vandana Kannan <vandana.kannan@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Barnes, Jesse" <jesse.barnes@intel.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com>
Subject: Re: [PATCH] drm/edid: Fill PAR in AVI infoframe based on CEA mode list
Date: Tue, 01 Apr 2014 08:06:04 +0530 [thread overview]
Message-ID: <533A2614.8040501@intel.com> (raw)
In-Reply-To: <20140331190504.GZ22327@phenom.ffwll.local>
On Apr-01-2014 12:35 AM, Daniel Vetter wrote:
> On Fri, Mar 21, 2014 at 08:31:29AM +0530, Vandana Kannan wrote:
>> Populate PAR in infoframe structure. If there is a user setting for PAR, then
>> that value is set. Else, value is taken from CEA mode list if VIC is found.
>> Else, PAR is calculated from resolution. If none of these conditions are
>> satisfied, PAR is NONE as per initialization.
>>
>> As a next step, create a property that would enable a user space app to set
>> aspect ratio. (will be pushed as a separate patch)
>>
>> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
>> Cc: Jesse Barnes <jesse.barnes@intel.com>
>> Cc: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> Cc: intel-gfx@lists.freedesktop.org
>> ---
>> drivers/gpu/drm/drm_edid.c | 34 ++++++++++++++++++++++++++++++++++
>> include/drm/drm_crtc.h | 1 +
>> 2 files changed, 35 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>> index d4e3f9d..3db693f 100644
>> --- a/drivers/gpu/drm/drm_edid.c
>> +++ b/drivers/gpu/drm/drm_edid.c
>> @@ -2452,6 +2452,21 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
>> }
>> EXPORT_SYMBOL(drm_match_cea_mode);
>>
>> +/**
>> + * drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
>> + * the input VIC from the CEA mode list
>> + *
>> + * Returns picture aspect ratio
>> + */
>> +enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
>> +{
>> + /* return picture aspect ratio for video_code - 1 to access the
>> + * right array element
>> + */
>> + return edid_cea_modes[video_code-1].picture_aspect_ratio;
>> +}
>> +EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
>> +
>> /*
>> * Calculate the alternate clock for HDMI modes (those from the HDMI vendor
>> * specific block).
>> @@ -3613,6 +3628,25 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
>> frame->video_code = drm_match_cea_mode(mode);
>>
>> frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
>> +
>> + /* Populate picture aspect ratio from either CEA mode list or
>> + * user input
>> + */
>> + if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
>> + mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
>> + frame->picture_aspect = mode->picture_aspect_ratio;
>
> Please pardon my ignorance, but how can userspace actually set this part
> of the mode? I couldn't find any code which sets this anywhere ...
> -Daniel
>
I have submitted a patch to enable user space to set picture aspect
ratio through a property..
drm/i915: Add property to set HDMI aspect ratio
http://lists.freedesktop.org/archives/intel-gfx/2014-March/042403.html
-Vandana
>> + else if (frame->video_code > 0)
>> + frame->picture_aspect = drm_get_cea_aspect_ratio(
>> + frame->video_code);
>> + else {
>> + if (!(mode->vdisplay % 3) &&
>> + (((mode->vdisplay * 4) / 3) == mode->hdisplay))
>> + frame->picture_aspect = HDMI_PICTURE_ASPECT_4_3;
>> + else if (!(mode->vdisplay % 9) &&
>> + (((mode->vdisplay * 16) / 9) == mode->hdisplay))
>> + frame->picture_aspect = HDMI_PICTURE_ASPECT_16_9;
>> + }
>> +
>> frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
>> frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
>>
>> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
>> index 27f828c..50dc55a 100644
>> --- a/include/drm/drm_crtc.h
>> +++ b/include/drm/drm_crtc.h
>> @@ -983,6 +983,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
>> extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
>> void *data, struct drm_file *file_priv);
>> extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
>> +extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
>> extern bool drm_detect_hdmi_monitor(struct edid *edid);
>> extern bool drm_detect_monitor_audio(struct edid *edid);
>> extern bool drm_rgb_quant_range_selectable(struct edid *edid);
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
next prev parent reply other threads:[~2014-04-01 2:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-21 3:01 [PATCH] drm/edid: Fill PAR in AVI infoframe based on CEA mode list Vandana Kannan
2014-03-31 18:55 ` Jesse Barnes
2014-03-31 19:05 ` Daniel Vetter
2014-04-01 2:36 ` Vandana Kannan [this message]
2014-04-01 7:27 ` Daniel Vetter
2014-04-01 9:26 ` Vandana Kannan
2014-04-01 9:51 ` Daniel Vetter
2014-04-01 10:56 ` [PATCH v2] " Vandana Kannan
2014-04-01 11:34 ` Ville Syrjälä
2014-04-01 13:13 ` Vandana Kannan
2014-04-01 13:54 ` Ville Syrjälä
2014-04-01 14:22 ` [PATCH v3] " Vandana Kannan
2014-04-01 15:37 ` [PATCH v4] " Vandana Kannan
2014-04-01 17:40 ` Daniel Vetter
2014-04-01 17:04 ` [Intel-gfx] [PATCH v3] " Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533A2614.8040501@intel.com \
--to=vandana.kannan@intel.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jesse.barnes@intel.com \
--cc=vijay.a.purushothaman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox