From: "Kumar, Shobhit" <shobhit.kumar@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>,
Daniel Vetter <daniel.vetter@intel.com>,
intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] drm/i915: Detect if MIPI panel based on VBT and initialize only if present
Date: Tue, 27 May 2014 17:13:41 +0530 [thread overview]
Message-ID: <53847A6D.4000503@intel.com> (raw)
In-Reply-To: <20140527114057.GH14357@phenom.ffwll.local>
On 5/27/2014 5:10 PM, Daniel Vetter wrote:
> On Fri, May 23, 2014 at 09:39:28PM +0530, Shobhit Kumar wrote:
>> It seems by default the VBT has MIPI configuration block as well. The
>> Generic driver will assume always MIPI if MIPI configuration block is found.
>> This is causing probelm when actually there is eDP. Fix this by looking
>> into general definition block which will have device configurations. From here
>> we can figure out what is the LFP type and initialize MIPI only if MIPI
>> is found.
>>
>> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
>
> Will the mipi patch I've just merged without this one here break machines?
> If so we need to get this one here into shape asap, for otherwise I need
> to kick out the mipi patch again. Which we really don't want.
Yes it will break. I am working on this patch right now
Regards
Shobhit
> -Daniel
>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 2 ++
>> drivers/gpu/drm/i915/intel_bios.c | 20 +++++++++++++++++++-
>> drivers/gpu/drm/i915/intel_display.c | 4 +++-
>> 3 files changed, 24 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 8e78703..5a5225b 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -1229,7 +1229,9 @@ struct intel_vbt_data {
>> } backlight;
>>
>> /* MIPI DSI */
>> + int is_mipi;
>> struct {
>> + u16 port;
>> u16 panel_id;
>> struct mipi_config *config;
>> struct mipi_pps_data *pps;
>> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
>> index 6b65096..b825c80 100644
>> --- a/drivers/gpu/drm/i915/intel_bios.c
>> +++ b/drivers/gpu/drm/i915/intel_bios.c
>> @@ -1059,6 +1059,20 @@ parse_device_mapping(struct drm_i915_private *dev_priv,
>> /* skip the device block if device type is invalid */
>> continue;
>> }
>> +
>> +#define MIPI_PORT_A 0x15
>> +#define MIPI_PORT_B 0x16
>> +#define MIPI_PORT_C 0x17
>> +#define MIPI_PORT_D 0x18
>> + if (p_child->common.dvo_port >= MIPI_PORT_A && p_child->common.dvo_port <= MIPI_PORT_D) {
>> + /* check the device type and confirm its MIPI */
>> + if (p_child->common.device_type & DEVICE_TYPE_MIPI_OUTPUT) {
>> + DRM_DEBUG_KMS("Found MIPI as LFP\n");
>> + dev_priv->vbt.is_mipi = 1;
>> + dev_priv->vbt.dsi.port = p_child->common.dvo_port;
>> + }
>> + }
>> +
>> child_dev_ptr = dev_priv->vbt.child_dev + count;
>> count++;
>> memcpy((void *)child_dev_ptr, (void *)p_child,
>> @@ -1230,7 +1244,11 @@ intel_parse_bios(struct drm_device *dev)
>> parse_device_mapping(dev_priv, bdb);
>> parse_driver_features(dev_priv, bdb);
>> parse_edp(dev_priv, bdb);
>> - parse_mipi(dev_priv, bdb);
>> +
>> + /* parse MIPI blocks only if LFP type is MIPI */
>> + if (dev_priv->vbt.is_mipi)
>> + parse_mipi(dev_priv, bdb);
>> +
>> parse_ddi_ports(dev_priv, bdb);
>>
>> if (bios)
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 3da73ef..a55fa41 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -11151,7 +11151,9 @@ static void intel_setup_outputs(struct drm_device *dev)
>> }
>> }
>>
>> - intel_dsi_init(dev);
>> + /* There is no detection method for MIPI so rely on VBT */
>> + if (dev_priv->vbt.is_mipi)
>> + intel_dsi_init(dev);
>> } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
>> bool found = false;
>>
>> --
>> 1.8.3.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
next prev parent reply other threads:[~2014-05-27 11:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 16:09 [PATCH] drm/i915: Detect if MIPI panel based on VBT and initialize only if present Shobhit Kumar
2014-05-27 11:32 ` Damien Lespiau
2014-05-27 12:10 ` Kumar, Shobhit
2014-05-27 12:27 ` Damien Lespiau
2014-05-27 11:40 ` Daniel Vetter
2014-05-27 11:43 ` Kumar, Shobhit [this message]
2014-05-27 12:56 ` [v2] " Shobhit Kumar
2014-05-27 13:18 ` Damien Lespiau
2014-05-27 14:03 ` [v3] " Shobhit Kumar
2014-05-27 14:17 ` Damien Lespiau
2014-05-27 14:31 ` Ville Syrjälä
2014-05-27 14:35 ` Damien Lespiau
2014-05-27 17:05 ` Daniel Vetter
2014-05-27 14:31 ` Kumar, Shobhit
2014-05-27 17:10 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53847A6D.4000503@intel.com \
--to=shobhit.kumar@intel.com \
--cc=daniel.vetter@intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox