From: "Antti Koskipää" <antti.koskipaa@linux.intel.com>
To: "daniel@ffwll.ch" <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2] drm/i915: Always apply cursor width changes
Date: Mon, 02 Jun 2014 13:46:11 +0300 [thread overview]
Message-ID: <538C55F3.3030402@linux.intel.com> (raw)
In-Reply-To: <20140602084956.GP19050@phenom.ffwll.local>
On 06/02/2014 11:49 AM, Daniel Vetter wrote:
> On Fri, May 30, 2014 at 04:35:26PM +0300, Chris Wilson wrote:
>> It is possible for userspace to create a big object large enough for a
>> 256x256, and then switch over to using it as a 64x64 cursor. This
>> requires the cursor update routines to check for a change in width on
>> every update, rather than just when the cursor is originally enabled.
>>
>> This also fixes an issue with 845g/865g which cannot change the base
>> address of the cursor whilst it is active.
>>
>> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>> [Antti:rebased, adjusted macro names and moved some lines, no functional
>> changes]
>> Reviewed-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
>> Tested-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
>
> Still missing the igt testcase. Is Antti still working on that one?
The testcase was just posted. It just needed some cleanup.
> And I
> guess now we also need an Cc: stable@vger.kernel.org on this one here.
> -Daniel
>
>> ---
>> drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
>> drivers/gpu/drm/i915/intel_display.c | 106 +++++++++++++++++------------------
>> drivers/gpu/drm/i915/intel_drv.h | 3 +-
>> 3 files changed, 53 insertions(+), 58 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
>> index 2e5f76a..04d0b7c 100644
>> --- a/drivers/gpu/drm/i915/i915_debugfs.c
>> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>> @@ -2353,7 +2353,7 @@ static int i915_display_info(struct seq_file *m, void *unused)
>>
>> active = cursor_position(dev, crtc->pipe, &x, &y);
>> seq_printf(m, "\tcursor visible? %s, position (%d, %d), addr 0x%08x, active? %s\n",
>> - yesno(crtc->cursor_visible),
>> + yesno(crtc->cursor_base),
>> x, y, crtc->cursor_addr,
>> yesno(active));
>> }
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 731cd01..955f92d 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -7872,29 +7872,33 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
>> struct drm_device *dev = crtc->dev;
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> - bool visible = base != 0;
>> - u32 cntl;
>> + uint32_t cntl;
>>
>> - if (intel_crtc->cursor_visible == visible)
>> - return;
>> -
>> - cntl = I915_READ(_CURACNTR);
>> - if (visible) {
>> + if (base != intel_crtc->cursor_base) {
>> /* On these chipsets we can only modify the base whilst
>> * the cursor is disabled.
>> */
>> + if (intel_crtc->cursor_cntl) {
>> + I915_WRITE(_CURACNTR, 0);
>> + POSTING_READ(_CURACNTR);
>> + intel_crtc->cursor_cntl = 0;
>> + }
>> +
>> I915_WRITE(_CURABASE, base);
>> + POSTING_READ(_CURABASE);
>> + }
>>
>> - cntl &= ~(CURSOR_FORMAT_MASK);
>> - /* XXX width must be 64, stride 256 => 0x00 << 28 */
>> - cntl |= CURSOR_ENABLE |
>> + /* XXX width must be 64, stride 256 => 0x00 << 28 */
>> + cntl = 0;
>> + if (base)
>> + cntl = (CURSOR_ENABLE |
>> CURSOR_GAMMA_ENABLE |
>> - CURSOR_FORMAT_ARGB;
>> - } else
>> - cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
>> - I915_WRITE(_CURACNTR, cntl);
>> -
>> - intel_crtc->cursor_visible = visible;
>> + CURSOR_FORMAT_ARGB);
>> + if (intel_crtc->cursor_cntl != cntl) {
>> + I915_WRITE(_CURACNTR, cntl);
>> + POSTING_READ(_CURACNTR);
>> + intel_crtc->cursor_cntl = cntl;
>> + }
>> }
>>
>> static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
>> @@ -7903,16 +7907,12 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> int pipe = intel_crtc->pipe;
>> - bool visible = base != 0;
>> -
>> - if (intel_crtc->cursor_visible != visible) {
>> - int16_t width = intel_crtc->cursor_width;
>> - uint32_t cntl = I915_READ(CURCNTR(pipe));
>> - if (base) {
>> - cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
>> - cntl |= MCURSOR_GAMMA_ENABLE;
>> + uint32_t cntl;
>>
>> - switch (width) {
>> + cntl = 0;
>> + if (base) {
>> + cntl = MCURSOR_GAMMA_ENABLE;
>> + switch (intel_crtc->cursor_width) {
>> case 64:
>> cntl |= CURSOR_MODE_64_ARGB_AX;
>> break;
>> @@ -7925,18 +7925,16 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
>> default:
>> WARN_ON(1);
>> return;
>> - }
>> - cntl |= pipe << 28; /* Connect to correct pipe */
>> - } else {
>> - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
>> - cntl |= CURSOR_MODE_DISABLE;
>> }
>> + cntl |= pipe << 28; /* Connect to correct pipe */
>> + }
>> + if (intel_crtc->cursor_cntl != cntl) {
>> I915_WRITE(CURCNTR(pipe), cntl);
>> -
>> - intel_crtc->cursor_visible = visible;
>> + POSTING_READ(CURCNTR(pipe));
>> + intel_crtc->cursor_cntl = cntl;
>> }
>> +
>> /* and commit changes on next vblank */
>> - POSTING_READ(CURCNTR(pipe));
>> I915_WRITE(CURBASE(pipe), base);
>> POSTING_READ(CURBASE(pipe));
>> }
>> @@ -7947,15 +7945,12 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> int pipe = intel_crtc->pipe;
>> - bool visible = base != 0;
>> -
>> - if (intel_crtc->cursor_visible != visible) {
>> - int16_t width = intel_crtc->cursor_width;
>> - uint32_t cntl = I915_READ(CURCNTR(pipe));
>> - if (base) {
>> - cntl &= ~CURSOR_MODE;
>> - cntl |= MCURSOR_GAMMA_ENABLE;
>> - switch (width) {
>> + uint32_t cntl;
>> +
>> + cntl = 0;
>> + if (base) {
>> + cntl = MCURSOR_GAMMA_ENABLE;
>> + switch (intel_crtc->cursor_width) {
>> case 64:
>> cntl |= CURSOR_MODE_64_ARGB_AX;
>> break;
>> @@ -7968,21 +7963,18 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
>> default:
>> WARN_ON(1);
>> return;
>> - }
>> - } else {
>> - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
>> - cntl |= CURSOR_MODE_DISABLE;
>> - }
>> - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
>> - cntl |= CURSOR_PIPE_CSC_ENABLE;
>> - cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
>> }
>> - I915_WRITE(CURCNTR(pipe), cntl);
>> + }
>> + if (IS_HASWELL(dev) || IS_BROADWELL(dev))
>> + cntl |= CURSOR_PIPE_CSC_ENABLE;
>>
>> - intel_crtc->cursor_visible = visible;
>> + if (intel_crtc->cursor_cntl != cntl) {
>> + I915_WRITE(CURCNTR(pipe), cntl);
>> + POSTING_READ(CURCNTR(pipe));
>> + intel_crtc->cursor_cntl = cntl;
>> }
>> +
>> /* and commit changes on next vblank */
>> - POSTING_READ(CURCNTR(pipe));
>> I915_WRITE(CURBASE(pipe), base);
>> POSTING_READ(CURBASE(pipe));
>> }
>> @@ -7998,7 +7990,6 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
>> int x = intel_crtc->cursor_x;
>> int y = intel_crtc->cursor_y;
>> u32 base = 0, pos = 0;
>> - bool visible;
>>
>> if (on)
>> base = intel_crtc->cursor_addr;
>> @@ -8027,8 +8018,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
>> }
>> pos |= y << CURSOR_Y_SHIFT;
>>
>> - visible = base != 0;
>> - if (!visible && !intel_crtc->cursor_visible)
>> + if (base == 0 && intel_crtc->cursor_base == 0)
>> return;
>>
>> I915_WRITE(CURPOS(pipe), pos);
>> @@ -8039,6 +8029,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
>> i845_update_cursor(crtc, base);
>> else
>> i9xx_update_cursor(crtc, base);
>> + intel_crtc->cursor_base = base;
>> }
>>
>> static int intel_crtc_cursor_set(struct drm_crtc *crtc,
>> @@ -10970,6 +10961,9 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>> intel_crtc->plane = !pipe;
>> }
>>
>> + intel_crtc->cursor_base = ~0;
>> + intel_crtc->cursor_cntl = ~0;
>> +
>> init_waitqueue_head(&intel_crtc->vbl_wait);
>>
>> BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 9bb70dc..9d1ff7b 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -386,7 +386,8 @@ struct intel_crtc {
>> uint32_t cursor_addr;
>> int16_t cursor_x, cursor_y;
>> int16_t cursor_width, cursor_height;
>> - bool cursor_visible;
>> + uint32_t cursor_cntl;
>> + uint32_t cursor_base;
>>
>> struct intel_plane_config plane_config;
>> struct intel_crtc_config config;
>> --
>> 1.8.3.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
--
- Antti
next prev parent reply other threads:[~2014-06-02 10:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-30 13:35 [PATCH v2] drm/i915: Always apply cursor width changes Chris Wilson
2014-06-02 8:49 ` Daniel Vetter
2014-06-02 10:46 ` Antti Koskipää [this message]
2014-06-02 15:34 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=538C55F3.3030402@linux.intel.com \
--to=antti.koskipaa@linux.intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox