From: Vandana Kannan <vandana.kannan@intel.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 1/2] drm/i915: Set M2_N2 registers during mode set
Date: Thu, 10 Jul 2014 10:10:54 +0530 [thread overview]
Message-ID: <53BE1956.9050700@intel.com> (raw)
In-Reply-To: <20140709141220.43977495@jbarnes-desktop>
On Jul-10-2014 2:42 AM, Jesse Barnes wrote:
> On Mon, 7 Jul 2014 14:59:45 +0530
> Vandana Kannan <vandana.kannan@intel.com> wrote:
>
>> For Gen < 8, set M2_N2 registers on every mode set. This is required to make
>> sure M2_N2 registers are set during boot, resume from sleep for cross-
>> checking the state. The register is set only if DRRS is supported.
>>
>> v2: Patch rebased
>>
>> v3: Daniel's review comments
>> - Removed HAS_DRRS(dev) and added bool has_drrs to pipe_config to
>> track drrs support
>>
>> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
>> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
>> ---
>> drivers/gpu/drm/i915/intel_display.c | 36 ++++++++++++++++++++++++++++++++----
>> drivers/gpu/drm/i915/intel_dp.c | 16 ++--------------
>> drivers/gpu/drm/i915/intel_drv.h | 2 ++
>> 3 files changed, 36 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index a72b55f..22bdea5f 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -4020,8 +4020,12 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
>> if (intel_crtc->config.has_pch_encoder)
>> intel_prepare_shared_dpll(intel_crtc);
>>
>> - if (intel_crtc->config.has_dp_encoder)
>> + if (intel_crtc->config.has_dp_encoder) {
>> intel_dp_set_m_n(intel_crtc);
>> + if (INTEL_INFO(dev)->gen < 8 && intel_crtc->config.has_drrs)
>> + intel_dp_set_m2_n2(intel_crtc,
>> + &intel_crtc->config.dp_m2_n2);
>> + }
>>
>> intel_set_pipe_timings(intel_crtc);
>>
>> @@ -4130,8 +4134,12 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
>> if (intel_crtc->active)
>> return;
>>
>> - if (intel_crtc->config.has_dp_encoder)
>> + if (intel_crtc->config.has_dp_encoder) {
>> intel_dp_set_m_n(intel_crtc);
>> + if (INTEL_INFO(dev)->gen < 8 && intel_crtc->config.has_drrs)
>> + intel_dp_set_m2_n2(intel_crtc,
>> + &intel_crtc->config.dp_m2_n2);
>> + }
>>
>> intel_set_pipe_timings(intel_crtc);
>>
>> @@ -4648,8 +4656,12 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
>> /* Set up the display plane register */
>> dspcntr = DISPPLANE_GAMMA_ENABLE;
>>
>> - if (intel_crtc->config.has_dp_encoder)
>> + if (intel_crtc->config.has_dp_encoder) {
>> intel_dp_set_m_n(intel_crtc);
>> + if (INTEL_INFO(dev)->gen < 8 && intel_crtc->config.has_drrs)
>> + intel_dp_set_m2_n2(intel_crtc,
>> + &intel_crtc->config.dp_m2_n2);
>> + }
>>
>> intel_set_pipe_timings(intel_crtc);
>>
>> @@ -4738,8 +4750,12 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
>> else
>> dspcntr |= DISPPLANE_SEL_PIPE_B;
>>
>> - if (intel_crtc->config.has_dp_encoder)
>> + if (intel_crtc->config.has_dp_encoder) {
>> intel_dp_set_m_n(intel_crtc);
>> + if (INTEL_INFO(dev)->gen < 8 && intel_crtc->config.has_drrs)
>> + intel_dp_set_m2_n2(intel_crtc,
>> + &intel_crtc->config.dp_m2_n2);
>> + }
>>
>> intel_set_pipe_timings(intel_crtc);
>>
>> @@ -5530,6 +5546,18 @@ static void intel_dp_set_m_n(struct intel_crtc *crtc)
>> intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
>> }
>>
>> +void intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n)
>> +{
>> + struct drm_device *dev = crtc->base.dev;
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + enum transcoder transcoder = crtc->config.cpu_transcoder;
>> +
>> + I915_WRITE(PIPE_DATA_M2(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
>> + I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n);
>> + I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m);
>> + I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n);
>> +}
>> +
>> static void vlv_update_pll(struct intel_crtc *crtc)
>> {
>> u32 dpll, dpll_md;
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index b5ec489..1c3960b 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -780,20 +780,6 @@ intel_dp_set_clock(struct intel_encoder *encoder,
>> }
>> }
>>
>> -static void
>> -intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n)
>> -{
>> - struct drm_device *dev = crtc->base.dev;
>> - struct drm_i915_private *dev_priv = dev->dev_private;
>> - enum transcoder transcoder = crtc->config.cpu_transcoder;
>> -
>> - I915_WRITE(PIPE_DATA_M2(transcoder),
>> - TU_SIZE(m_n->tu) | m_n->gmch_m);
>> - I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n);
>> - I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m);
>> - I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n);
>> -}
>> -
>> bool
>> intel_dp_compute_config(struct intel_encoder *encoder,
>> struct intel_crtc_config *pipe_config)
>> @@ -819,6 +805,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>> pipe_config->has_pch_encoder = true;
>>
>> pipe_config->has_dp_encoder = true;
>> + pipe_config->has_drrs = false;
>> pipe_config->has_audio = intel_dp->has_audio;
>>
>> if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
>> @@ -922,6 +909,7 @@ found:
>>
>> if (intel_connector->panel.downclock_mode != NULL &&
>> intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) {
>> + pipe_config->has_drrs = true;
>> intel_link_compute_m_n(bpp, lane_count,
>> intel_connector->panel.downclock_mode->clock,
>> pipe_config->port_clock,
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 5f7c7bd..d35b1ed 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -315,6 +315,7 @@ struct intel_crtc_config {
>>
>> /* m2_n2 for eDP downclock */
>> struct intel_link_m_n dp_m2_n2;
>> + bool has_drrs;
>>
>> /*
>> * Frequence the dpll for the port should run at. Differs from the
>> @@ -836,6 +837,7 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
>> struct intel_crtc_config *pipe_config);
>> int intel_format_to_fourcc(int format);
>> void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc);
>> +void intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n);
>>
>>
>> /* intel_dp.c */
>
> One potential cleanup would be to move the setting of the m2/n2 pair
> into the set_m_n function itself. That would save us from sprinkling
> checks all over.
>
Will make changes for this..
> Also, we could make the check depend just on has_drrs, I think the gen8
> check is redundant?
>
You are correct, I will remove the redundant gen8 check..
- Vandana
> But those can go on top I think, otherwise looks ok.
>
next prev parent reply other threads:[~2014-07-10 4:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 9:29 [PATCH 1/2] drm/i915: Set M2_N2 registers during mode set Vandana Kannan
2014-07-07 9:29 ` [PATCH 2/2] drm/i915: State readout and cross-checking for dp_m2_n2 Vandana Kannan
2014-07-09 21:12 ` [PATCH 1/2] drm/i915: Set M2_N2 registers during mode set Jesse Barnes
2014-07-10 4:40 ` Vandana Kannan [this message]
2014-07-11 9:02 ` [PATCH v4 " Vandana Kannan
2014-07-11 9:02 ` [PATCH v8 2/2] drm/i915: State readout and cross-checking for dp_m2_n2 Vandana Kannan
2014-07-11 15:15 ` [PATCH v4 1/2] drm/i915: Set M2_N2 registers during mode set Jesse Barnes
-- strict thread matches above, loose matches on Subject: below --
2014-05-21 11:10 [PATCH " Vandana Kannan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53BE1956.9050700@intel.com \
--to=vandana.kannan@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox