public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Todd Previte <tprevite@gmail.com>
To: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/2] drm/i915: Do a dummy DPCD read before the actual read
Date: Thu, 16 Oct 2014 12:39:29 -0700	[thread overview]
Message-ID: <54401EF1.4060908@gmail.com> (raw)
In-Reply-To: <1413481570-18288-1-git-send-email-ville.syrjala@linux.intel.com>


On 10/16/2014 10:46 AM, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Sometimes we seem to get utter garbage from DPCD reads. The resulting
> buffer is filled with the same byte, and the operation completed without
> errors. My HP ZR24w monitor seems particularly susceptible to this
> problem once it's gone into a sleep mode.
>
> The issue seems to happen only for the first AUX message that wakes the
> sink up. But as the first AUX read we often do is the DPCD receiver
> cap it does wreak a bit of havoc with subsequent link training etc. when
> the receiver cap bw/lane/etc. information is garbage.
>
> A sufficient workaround seems to be to perform a single byte dummy read
> before reading the actual data. I suppose that just wakes up the sink
> sufficiently and we can just throw away the returned data in case it's
> crap. DP_DPCD_REV seems like a sufficiently safe location to read here.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>   drivers/gpu/drm/i915/intel_dp.c | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 64c8e04..f07f02c 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -2870,6 +2870,13 @@ intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
>   	ssize_t ret;
>   	int i;
>   
> +	/*
> +	 * Sometime we just get the same incorrect byte repeated
> +	 * over the entire buffer. Doing just one throw away read
> +	 * initially seems to "solve" it.
> +	 */
> +	drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
> +
>   	for (i = 0; i < 3; i++) {
>   		ret = drm_dp_dpcd_read(aux, offset, buffer, size);
>   		if (ret == size)
Seems like a reasonable workaround for this problem, though 
investigating the actual root cause might be worthwhile.

Reviewed-by: Todd Previte <tprevite@gmail.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2014-10-16 19:39 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-16 17:46 [PATCH 1/2] drm/i915: Do a dummy DPCD read before the actual read ville.syrjala
2014-10-16 17:46 ` [PATCH 2/2] drm/i915: Ignore long hpds on eDP ports ville.syrjala
2014-10-16 19:38   ` Todd Previte
2014-10-17  8:43     ` Ville Syrjälä
2014-10-17 16:08       ` Todd Previte
2014-10-21 16:00         ` Daniel Vetter
2014-10-22  1:22           ` Dave Airlie
2014-10-22  7:39           ` Ville Syrjälä
2014-10-22 13:42           ` Jani Nikula
2014-10-17  3:37   ` Dave Airlie
2014-10-17  8:49   ` Jani Nikula
2014-10-17  9:00     ` Ville Syrjälä
2014-10-16 19:39 ` Todd Previte [this message]
2014-10-17  9:06   ` [PATCH 1/2] drm/i915: Do a dummy DPCD read before the actual read Ville Syrjälä
2014-10-17 16:13     ` Todd Previte
2014-10-21 15:57   ` Daniel Vetter
2014-10-17  8:43 ` Jani Nikula
2014-10-17  8:59   ` Ville Syrjälä
2014-10-17 16:38     ` Todd Previte
2014-10-17 16:10   ` Todd Previte

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54401EF1.4060908@gmail.com \
    --to=tprevite@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox