public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Ander Conselvan de Oliveira <conselvan2@gmail.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, intel-gfx@lists.freedesktop.org
Cc: shuang.he@linux.intel.com
Subject: Re: [PATCH 3/6] drm/i915/hdmi: fetch infoframe status in get_config v2
Date: Mon, 10 Nov 2014 18:09:21 +0200	[thread overview]
Message-ID: <5460E331.2070604@gmail.com> (raw)
In-Reply-To: <1415226371-1880-3-git-send-email-jbarnes@virtuousgeek.org>

Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>

On 11/06/2014 12:26 AM, Jesse Barnes wrote:
> This is useful for checking things later.
> 
> v2:
>    - fix hsw infoframe enabled check (Ander)
> 
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> ---
>   drivers/gpu/drm/i915/intel_drv.h  |  4 +++
>   drivers/gpu/drm/i915/intel_hdmi.c | 62 +++++++++++++++++++++++++++++++++++++++
>   2 files changed, 66 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index d53ac23..8aa80e1 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -292,6 +292,9 @@ struct intel_crtc_config {
>   	 * between pch encoders and cpu encoders. */
>   	bool has_pch_encoder;
>   
> +	/* Are we sending infoframes on the attached port */
> +	bool has_infoframe;
> +
>   	/* CPU Transcoder for the pipe. Currently this can only differ from the
>   	 * pipe on Haswell (where we have a special eDP transcoder). */
>   	enum transcoder cpu_transcoder;
> @@ -543,6 +546,7 @@ struct intel_hdmi {
>   	void (*set_infoframes)(struct drm_encoder *encoder,
>   			       bool enable,
>   			       struct drm_display_mode *adjusted_mode);
> +	bool (*infoframe_enabled)(struct drm_encoder *encoder);
>   };
>   
>   struct intel_dp_mst_encoder;
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 07b5ebd..994237a 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -166,6 +166,15 @@ static void g4x_write_infoframe(struct drm_encoder *encoder,
>   	POSTING_READ(VIDEO_DIP_CTL);
>   }
>   
> +static bool g4x_infoframe_enabled(struct drm_encoder *encoder)
> +{
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 val = I915_READ(VIDEO_DIP_CTL);
> +
> +	return val & VIDEO_DIP_ENABLE;
> +}
> +
>   static void ibx_write_infoframe(struct drm_encoder *encoder,
>   				enum hdmi_infoframe_type type,
>   				const void *frame, ssize_t len)
> @@ -204,6 +213,17 @@ static void ibx_write_infoframe(struct drm_encoder *encoder,
>   	POSTING_READ(reg);
>   }
>   
> +static bool ibx_infoframe_enabled(struct drm_encoder *encoder)
> +{
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> +	int reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
> +	u32 val = I915_READ(reg);
> +
> +	return val & VIDEO_DIP_ENABLE;
> +}
> +
>   static void cpt_write_infoframe(struct drm_encoder *encoder,
>   				enum hdmi_infoframe_type type,
>   				const void *frame, ssize_t len)
> @@ -245,6 +265,17 @@ static void cpt_write_infoframe(struct drm_encoder *encoder,
>   	POSTING_READ(reg);
>   }
>   
> +static bool cpt_infoframe_enabled(struct drm_encoder *encoder)
> +{
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> +	int reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
> +	u32 val = I915_READ(reg);
> +
> +	return val & VIDEO_DIP_ENABLE;
> +}
> +
>   static void vlv_write_infoframe(struct drm_encoder *encoder,
>   				enum hdmi_infoframe_type type,
>   				const void *frame, ssize_t len)
> @@ -283,6 +314,17 @@ static void vlv_write_infoframe(struct drm_encoder *encoder,
>   	POSTING_READ(reg);
>   }
>   
> +static bool vlv_infoframe_enabled(struct drm_encoder *encoder)
> +{
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> +	int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
> +	u32 val = I915_READ(reg);
> +
> +	return val & VIDEO_DIP_ENABLE;
> +}
> +
>   static void hsw_write_infoframe(struct drm_encoder *encoder,
>   				enum hdmi_infoframe_type type,
>   				const void *frame, ssize_t len)
> @@ -320,6 +362,18 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
>   	POSTING_READ(ctl_reg);
>   }
>   
> +static bool hsw_infoframe_enabled(struct drm_encoder *encoder)
> +{
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> +	u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config.cpu_transcoder);
> +	u32 val = I915_READ(ctl_reg);
> +
> +	return val & (VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_SPD_HSW |
> +		      VIDEO_DIP_ENABLE_VS_HSW);
> +}
> +
>   /*
>    * The data we write to the DIP data buffer registers is 1 byte bigger than the
>    * HDMI infoframe size because of an ECC/reserved byte at position 3 (starting
> @@ -732,6 +786,9 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder,
>   	if (tmp & HDMI_MODE_SELECT_HDMI)
>   		pipe_config->has_hdmi_sink = true;
>   
> +	if (intel_hdmi->infoframe_enabled(&encoder->base))
> +		pipe_config->has_infoframe = true;
> +
>   	if (tmp & SDVO_AUDIO_ENABLE)
>   		pipe_config->has_audio = true;
>   
> @@ -1616,18 +1673,23 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
>   	if (IS_VALLEYVIEW(dev)) {
>   		intel_hdmi->write_infoframe = vlv_write_infoframe;
>   		intel_hdmi->set_infoframes = vlv_set_infoframes;
> +		intel_hdmi->infoframe_enabled = vlv_infoframe_enabled;
>   	} else if (IS_G4X(dev)) {
>   		intel_hdmi->write_infoframe = g4x_write_infoframe;
>   		intel_hdmi->set_infoframes = g4x_set_infoframes;
> +		intel_hdmi->infoframe_enabled = g4x_infoframe_enabled;
>   	} else if (HAS_DDI(dev)) {
>   		intel_hdmi->write_infoframe = hsw_write_infoframe;
>   		intel_hdmi->set_infoframes = hsw_set_infoframes;
> +		intel_hdmi->infoframe_enabled = hsw_infoframe_enabled;
>   	} else if (HAS_PCH_IBX(dev)) {
>   		intel_hdmi->write_infoframe = ibx_write_infoframe;
>   		intel_hdmi->set_infoframes = ibx_set_infoframes;
> +		intel_hdmi->infoframe_enabled = ibx_infoframe_enabled;
>   	} else {
>   		intel_hdmi->write_infoframe = cpt_write_infoframe;
>   		intel_hdmi->set_infoframes = cpt_set_infoframes;
> +		intel_hdmi->infoframe_enabled = cpt_infoframe_enabled;
>   	}
>   
>   	if (HAS_DDI(dev))
> 

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2014-11-10 16:10 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-05 22:26 [PATCH 1/6] drm/i915: factor out compute_config from __intel_set_mode v3 Jesse Barnes
2014-11-05 22:26 ` [PATCH 2/6] drm/i915: use compute_config in set_config v3 Jesse Barnes
2014-11-07  9:41   ` Ander Conselvan de Oliveira
2014-11-07 16:59     ` Jesse Barnes
2014-11-07 21:11     ` [PATCH] drm/i915: use compute_config in set_config v4 Jesse Barnes
2014-11-10 16:09       ` Ander Conselvan de Oliveira
2014-11-05 22:26 ` [PATCH 3/6] drm/i915/hdmi: fetch infoframe status in get_config v2 Jesse Barnes
2014-11-10 16:09   ` Ander Conselvan de Oliveira [this message]
2014-11-11 15:00   ` Daniel Vetter
2014-11-11 15:19     ` Ville Syrjälä
2014-11-11 15:23       ` Daniel Vetter
2014-11-11 15:59         ` Jesse Barnes
2014-11-05 22:26 ` [PATCH 4/6] drm/i915: check for audio and infoframe changes across mode sets v2 Jesse Barnes
2014-11-10 16:09   ` Ander Conselvan de Oliveira
2014-12-01 10:25   ` Jani Nikula
2014-12-01 16:04     ` Jesse Barnes
2014-12-01 16:09       ` Chris Wilson
2014-12-01 16:30         ` Daniel Vetter
2014-12-01 16:37           ` Chris Wilson
2014-12-01 17:23             ` Daniel Vetter
2014-12-01 17:35               ` Jani Nikula
2014-12-01 19:26                 ` Daniel Vetter
2014-12-01 16:16     ` Daniel Vetter
2014-12-01 17:22       ` Jesse Barnes
2014-11-05 22:26 ` [PATCH 5/6] drm/i915: update pipe size at set_config time Jesse Barnes
2014-11-10 16:09   ` Ander Conselvan de Oliveira
2014-11-11 15:08     ` Daniel Vetter
2014-11-05 22:26 ` [PATCH 6/6] drm/i915: calculate pfit changes in set_config v2 Jesse Barnes
2014-11-06  8:43   ` [PATCH 6/6] drm/i915: calculate pfit changes in shuang.he
2014-11-10 16:20   ` [PATCH 6/6] drm/i915: calculate pfit changes in set_config v2 Ander Conselvan de Oliveira
2014-11-10 16:32     ` Jesse Barnes
2014-11-06  9:04 ` [PATCH 1/6] drm/i915: factor out compute_config from __intel_set_mode v3 Chris Wilson
2014-11-06 14:34   ` Daniel Vetter
2014-11-10 16:08 ` Ander Conselvan de Oliveira
  -- strict thread matches above, loose matches on Subject: below --
2014-10-30 18:53 [PATCH 1/6] drm/i915: factor out compute_config from __intel_set_mode v2 Jesse Barnes
2014-10-30 18:54 ` [PATCH 3/6] drm/i915/hdmi: fetch infoframe status in get_config v2 Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5460E331.2070604@gmail.com \
    --to=conselvan2@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jbarnes@virtuousgeek.org \
    --cc=shuang.he@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox