From: Ander Conselvan de Oliveira <conselvan2@gmail.com>
To: Matt Roper <matthew.d.roper@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/5] drm/i915: Move vblank evasion to commit (v4)
Date: Fri, 09 Jan 2015 14:20:05 +0200 [thread overview]
Message-ID: <54AFC775.5050809@gmail.com> (raw)
In-Reply-To: <1419360113-10972-3-git-send-email-matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
On 12/23/2014 08:41 PM, Matt Roper wrote:
> Move the vblank evasion up from the low-level, hw-specific
> update_plane() handlers to the general plane commit operation.
> Everything inside commit should now be non-sleeping, so this brings us
> closer to how vblank evasion will behave once we move over to atomic.
>
> v2:
> - Restore lost intel_crtc->active check on vblank evasion
>
> v3:
> - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
> with an intel_crtc->active test; it turns out assert_pipe_enabled()
> grabs some mutexes and can sleep, which we can't do with interrupts
> disabled.
>
> v4:
> - Equivalent to v2; v3 change is now squashed into an earlier patch
> of the series. (Ander).
>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 10 +++++++++
> drivers/gpu/drm/i915/intel_drv.h | 4 ++++
> drivers/gpu/drm/i915/intel_sprite.c | 42 ------------------------------------
> 3 files changed, 14 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 6bd44f3..8d6e710 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -11864,6 +11864,12 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
> intel_update_watermarks(crtc);
>
> intel_runtime_pm_get(dev_priv);
> +
> + /* Perform vblank evasion around commit operation */
> + if (intel_crtc->active)
> + intel_crtc->atomic.evade =
> + intel_pipe_update_start(intel_crtc,
> + &intel_crtc->atomic.start_vbl_count);
> }
>
> static void intel_finish_crtc_commit(struct drm_crtc *crtc)
> @@ -11873,6 +11879,10 @@ static void intel_finish_crtc_commit(struct drm_crtc *crtc)
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> struct drm_plane *p;
>
> + if (intel_crtc->atomic.evade)
> + intel_pipe_update_end(intel_crtc,
> + intel_crtc->atomic.start_vbl_count);
> +
> intel_runtime_pm_put(dev_priv);
>
> if (intel_crtc->atomic.wait_vblank)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index a03bd72..1934156 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -428,6 +428,10 @@ struct skl_pipe_wm {
> * and thus can't be run with interrupts disabled.
> */
> struct intel_crtc_atomic_commit {
> + /* vblank evasion */
> + bool evade;
> + unsigned start_vbl_count;
> +
> /* Sleepable operations to perform before commit */
> bool wait_for_flips;
> bool disable_fbc;
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 6e649de..18be827 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -412,8 +412,6 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
> u32 sprctl;
> unsigned long sprsurf_offset, linear_offset;
> int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> - u32 start_vbl_count;
> - bool atomic_update;
>
> sprctl = I915_READ(SPCNTR(pipe, plane));
>
> @@ -502,8 +500,6 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
> linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> }
>
> - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
> -
> intel_update_primary_plane(intel_crtc);
>
> if (IS_CHERRYVIEW(dev) && pipe == PIPE_B)
> @@ -525,9 +521,6 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
> sprsurf_offset);
>
> intel_flush_primary_plane(dev_priv, intel_crtc->plane);
> -
> - if (atomic_update)
> - intel_pipe_update_end(intel_crtc, start_vbl_count);
> }
>
> static void
> @@ -539,10 +532,6 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> int pipe = intel_plane->pipe;
> int plane = intel_plane->plane;
> - u32 start_vbl_count;
> - bool atomic_update;
> -
> - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
>
> intel_update_primary_plane(intel_crtc);
>
> @@ -553,9 +542,6 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
>
> intel_flush_primary_plane(dev_priv, intel_crtc->plane);
>
> - if (atomic_update)
> - intel_pipe_update_end(intel_crtc, start_vbl_count);
> -
> intel_update_sprite_watermarks(dplane, crtc, 0, 0, 0, false, false);
> }
>
> @@ -626,8 +612,6 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> u32 sprctl, sprscale = 0;
> unsigned long sprsurf_offset, linear_offset;
> int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> - u32 start_vbl_count;
> - bool atomic_update;
>
> sprctl = I915_READ(SPRCTL(pipe));
>
> @@ -711,8 +695,6 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> }
> }
>
> - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
> -
> intel_update_primary_plane(intel_crtc);
>
> I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
> @@ -735,9 +717,6 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
>
> intel_flush_primary_plane(dev_priv, intel_crtc->plane);
> -
> - if (atomic_update)
> - intel_pipe_update_end(intel_crtc, start_vbl_count);
> }
>
> static void
> @@ -748,10 +727,6 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> int pipe = intel_plane->pipe;
> - u32 start_vbl_count;
> - bool atomic_update;
> -
> - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
>
> intel_update_primary_plane(intel_crtc);
>
> @@ -764,9 +739,6 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
>
> intel_flush_primary_plane(dev_priv, intel_crtc->plane);
>
> - if (atomic_update)
> - intel_pipe_update_end(intel_crtc, start_vbl_count);
> -
> /*
> * Avoid underruns when disabling the sprite.
> * FIXME remove once watermark updates are done properly.
> @@ -845,8 +817,6 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> unsigned long dvssurf_offset, linear_offset;
> u32 dvscntr, dvsscale;
> int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> - u32 start_vbl_count;
> - bool atomic_update;
>
> dvscntr = I915_READ(DVSCNTR(pipe));
>
> @@ -921,8 +891,6 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> }
>
> - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
> -
> intel_update_primary_plane(intel_crtc);
>
> I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
> @@ -940,9 +908,6 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
>
> intel_flush_primary_plane(dev_priv, intel_crtc->plane);
> -
> - if (atomic_update)
> - intel_pipe_update_end(intel_crtc, start_vbl_count);
> }
>
> static void
> @@ -953,10 +918,6 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> int pipe = intel_plane->pipe;
> - u32 start_vbl_count;
> - bool atomic_update;
> -
> - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
>
> intel_update_primary_plane(intel_crtc);
>
> @@ -968,9 +929,6 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
>
> intel_flush_primary_plane(dev_priv, intel_crtc->plane);
>
> - if (atomic_update)
> - intel_pipe_update_end(intel_crtc, start_vbl_count);
> -
> /*
> * Avoid underruns when disabling the sprite.
> * FIXME remove once watermark updates are done properly.
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-01-09 12:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 18:41 [PATCH 0/5] i915 atomic plane helper conversion (v5) Matt Roper
2014-12-23 18:41 ` [PATCH 1/5] drm/i915: Refactor work that can sleep out of commit (v6) Matt Roper
2014-12-24 15:59 ` [PATCH 1/5] drm/i915: Refactor work that can sleep out of commit (v7) Matt Roper
2015-01-09 12:09 ` Ander Conselvan de Oliveira
2014-12-23 18:41 ` [PATCH 2/5] drm/i915: Move vblank evasion to commit (v4) Matt Roper
2015-01-09 12:20 ` Ander Conselvan de Oliveira [this message]
2014-12-23 18:41 ` [PATCH 3/5] drm/i915: Clarify sprite plane function names (v4) Matt Roper
2015-01-09 12:24 ` Ander Conselvan de Oliveira
2014-12-23 18:41 ` [PATCH 4/5] drm/i915: Move to atomic plane helpers (v9) Matt Roper
2015-01-09 13:02 ` Ander Conselvan de Oliveira
2014-12-23 18:41 ` [PATCH 5/5] drm/i915: Drop unused position fields (v2) Matt Roper
2014-12-23 22:59 ` shuang.he
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54AFC775.5050809@gmail.com \
--to=conselvan2@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox