Re: [PATCH] drm/i915: Reudce CHV DPLL min vco frequency to 4.8 GHz

["Purushothaman, Vijay A" <vijay.a.purushothaman@linux.intel.com>]

On 2/27/2015 12:31 AM, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> The current minimum vco frequency leaves us with a gap in our supported
> frequencies at 233-243 MHz. Your typical 2560x1440@60 display wants a
> pixel clock of 241.5 MHz, which is just withing that gap. Reduce the
> allowed vco min frequency to 4.8GHz to reduce the gap to 233-240 MHz,
> and thus allow such displays to work.
>
> 4.8 GHz is actually the documented (at least in some docs) limit of the
> PLL, and we just picked 4.86 GHz originally because that was the lowest
> value produced by the PLL spreadsheet, which obviously didn't consider
> 2560x1440 displays.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>   drivers/gpu/drm/i915/intel_display.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 102b12d..d437a21 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -390,7 +390,7 @@ static const intel_limit_t intel_limits_chv = {
>   	 * them would make no difference.
>   	 */
>   	.dot = { .min = 25000 * 5, .max = 540000 * 5},
> -	.vco = { .min = 4860000, .max = 6700000 },
> +	.vco = { .min = 4800000, .max = 6700000 },
>   	.n = { .min = 1, .max = 1 },
>   	.m1 = { .min = 2, .max = 2 },
>   	.m2 = { .min = 24 << 22, .max = 175 << 22 },

Minor nitpick: typo in patch title

Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>

Thanks,
Vijay
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx