From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: akash.goel@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v4 00/11] Added missing changes for Turbo feature on SKL
Date: Thu, 12 Mar 2015 15:08:24 -0700 [thread overview]
Message-ID: <55020E58.3060606@virtuousgeek.org> (raw)
In-Reply-To: <1425620244-12637-1-git-send-email-akash.goel@intel.com>
On 03/05/2015 09:37 PM, akash.goel@intel.com wrote:
> From: Akash Goel <akash.goel@intel.com>
>
> This patch series add the missing changes, required for proper
> functioning of the Turbo feature on SKL. Most of the changes are
> mainly due to the fact that on SKL, the frequency has to be programmed
> in units of 16.66 MHZ and the time period value programmed in Up/Down
> EI & threshold registers, is in units of 1.333 micro seconds.
> In this version, review comments from Chris & Ville have been addressed
> and a new patch has been added to enable the RPS interrupts programming
> for SKL also.
>
> Akash Goel (11):
> drm/i915/skl: Added new macros
> drm/i915/skl: Updated intel_gpu_freq() and intel_freq_opcode()
> drm/i915/skl: Updated the gen6_init_rps_frequencies function
> drm/i915/skl: Updated the gen6_set_rps function
> drm/i915/skl: Restructured the gen6_set_rps_thresholds function
> drm/i915/skl: Updated the gen6_rps_limits function
> drm/i915/skl: Updated the gen9_enable_rps function
> drm/i915/skl: Updated the i915_frequency_info debugfs function
> drm/i915/skl: Updated the act_freq_mhz_show sysfs function
> drm/i915/skl: Enabling processing of Turbo interrupts
> drm/i915/skl: Enable the RPS interrupts programming
>
> drivers/gpu/drm/i915/i915_debugfs.c | 25 ++++--
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/i915_irq.c | 5 --
> drivers/gpu/drm/i915/i915_reg.h | 9 +++
> drivers/gpu/drm/i915/i915_sysfs.c | 4 +-
> drivers/gpu/drm/i915/intel_pm.c | 147 ++++++++++++++++++------------------
> 6 files changed, 105 insertions(+), 86 deletions(-)
It looks like turbo is working, but the pm_rps test is still having a
little trouble. I patched this on top to make it happier, but there are
still problems with the test getting to the expected frequencies, please
check out https://bugs.freedesktop.org/show_bug.cgi?id=89123.
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6696,7 +6696,8 @@ static int chv_freq_opcode(struct drm_i915_private
*dev_pr
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
if (IS_GEN9(dev_priv->dev))
- return (val * GT_FREQUENCY_MULTIPLIER) / GEN9_FREQ_SCALER;
+ return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
+ GEN9_FREQ_SCALER);
else if (IS_CHERRYVIEW(dev_priv->dev))
return chv_gpu_freq(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv->dev))
@@ -6708,7 +6709,8 @@ int intel_gpu_freq(struct drm_i915_private
*dev_priv, int
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
if (IS_GEN9(dev_priv->dev))
- return (val * GEN9_FREQ_SCALER) / GT_FREQUENCY_MULTIPLIER;
+ return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
+ GT_FREQUENCY_MULTIPLIER);
else if (IS_CHERRYVIEW(dev_priv->dev))
return chv_freq_opcode(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv->dev))
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2015-03-12 22:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-06 5:37 [PATCH v4 00/11] Added missing changes for Turbo feature on SKL akash.goel
2015-03-06 5:37 ` [PATCH 01/11] drm/i915/skl: Added new macros akash.goel
2015-03-11 19:12 ` Ville Syrjälä
2015-03-06 5:37 ` [PATCH 02/11] drm/i915/skl: Updated intel_gpu_freq() and intel_freq_opcode() akash.goel
2015-03-06 5:37 ` [PATCH 03/11] drm/i915/skl: Updated the gen6_init_rps_frequencies function akash.goel
2015-03-11 19:12 ` Ville Syrjälä
2015-03-06 5:37 ` [PATCH 04/11] drm/i915/skl: Updated the gen6_set_rps function akash.goel
2015-03-06 5:37 ` [PATCH 05/11] drm/i915/skl: Restructured the gen6_set_rps_thresholds function akash.goel
2015-03-06 5:37 ` [PATCH 06/11] drm/i915/skl: Updated the gen6_rps_limits function akash.goel
2015-03-06 5:37 ` [PATCH 07/11] drm/i915/skl: Updated the gen9_enable_rps function akash.goel
2015-03-11 19:27 ` Jesse Barnes
2015-03-11 19:46 ` Chris Wilson
2015-03-11 20:08 ` Jesse Barnes
2015-03-11 20:39 ` Daniel Vetter
2015-03-06 5:37 ` [PATCH 08/11] drm/i915/skl: Updated the i915_frequency_info debugfs function akash.goel
2015-03-11 20:48 ` Ville Syrjälä
2015-03-06 5:37 ` [PATCH 09/11] drm/i915/skl: Updated the act_freq_mhz_show sysfs function akash.goel
2015-03-06 5:37 ` [PATCH 10/11] drm/i915/skl: Enabling processing of Turbo interrupts akash.goel
2015-03-11 19:23 ` Jesse Barnes
2015-03-06 5:37 ` [PATCH 11/11] drm/i915/skl: Enable the RPS interrupts programming akash.goel
2015-03-06 19:44 ` shuang.he
2015-03-11 21:12 ` Jesse Barnes
2015-03-12 9:14 ` Daniel Vetter
2015-03-12 22:08 ` Jesse Barnes [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55020E58.3060606@virtuousgeek.org \
--to=jbarnes@virtuousgeek.org \
--cc=akash.goel@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox