From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Subject: [PATCH v2 RFC 6/5] drm/i915: Update less state during modeset.
Date: Thu, 23 Apr 2015 08:29:14 +0200 [thread overview]
Message-ID: <5538913A.6020600@linux.intel.com> (raw)
In-Reply-To: <1429701862-22970-1-git-send-email-maarten.lankhorst@linux.intel.com>
No need to repeatedly call update_watermarks, or update_fbc.
For update_watermarks once should be enough after disabling crtc's
and swapping the state.
Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
There is no v1, this patch was added later to the series. :-)
The order in ironlake_crtc_disable is slightly changed with
intel_disable_shared_dpll and ironlake_fdi_pll_disable order changed.
I have no idea if this can cause problems, but it works on my system.
drivers/gpu/drm/i915/intel_display.c | 79 +++++++++++++-----------------------
1 file changed, 28 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2d2ada580b36..16204c525004 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4588,10 +4588,6 @@ intel_post_enable_primary(struct drm_crtc *crtc)
*/
hsw_enable_ips(intel_crtc);
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-
/*
* Gen2 reports pipe underruns whenever all planes are disabled.
* So don't enable underrun reporting before at least some planes
@@ -4646,11 +4642,6 @@ intel_pre_disable_primary(struct drm_crtc *crtc)
if (HAS_GMCH_DISPLAY(dev))
intel_set_memory_cxsr(dev_priv, false);
- mutex_lock(&dev->struct_mutex);
- if (dev_priv->fbc.crtc == intel_crtc)
- intel_fbc_disable(dev);
- mutex_unlock(&dev->struct_mutex);
-
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
@@ -4876,9 +4867,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
- return;
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
@@ -4916,18 +4904,8 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
I915_WRITE(PCH_DPLL_SEL, temp);
}
- /* disable PCH DPLL */
- intel_disable_shared_dpll(intel_crtc);
-
ironlake_fdi_pll_disable(intel_crtc);
}
-
- intel_crtc->active = false;
- intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
}
static void haswell_crtc_disable(struct drm_crtc *crtc)
@@ -4938,9 +4916,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- if (!intel_crtc->active)
- return;
-
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_opregion_notify_encoder(encoder, false);
encoder->disable(encoder);
@@ -4974,16 +4949,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->post_disable)
encoder->post_disable(encoder);
-
- intel_crtc->active = false;
- intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-
- if (intel_crtc_to_shared_dpll(intel_crtc))
- intel_disable_shared_dpll(intel_crtc);
}
static void i9xx_pfit_enable(struct intel_crtc *crtc)
@@ -5603,9 +5568,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
- return;
-
/*
* On gen2 planes are double buffered but the pipe isn't, so we must
* wait for planes to fully turn off before disabling the pipe.
@@ -5639,13 +5601,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
-
- intel_crtc->active = false;
- intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
}
/* Master function to enable/disable CRTC and corresponding power wells */
@@ -12008,11 +11963,21 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
__intel_set_mode_update_planes(dev, state);
for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
if (!needs_modeset(crtc_state))
continue;
+ if (!crtc->state->active)
+ continue;
+
intel_crtc_dpms_overlay_disable(to_intel_crtc(crtc));
dev_priv->display.crtc_disable(crtc);
+
+ intel_crtc->active = false;
+
+ if (intel_crtc_to_shared_dpll(intel_crtc))
+ intel_disable_shared_dpll(intel_crtc);
}
/* crtc->mode is already used by the ->mode_set callbacks, hence we need
@@ -12045,8 +12010,11 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!crtc->state->active)
+ if (!crtc->state->active) {
+ if (needs_modeset(crtc->state))
+ intel_update_watermarks(crtc);
continue;
+ }
update_scanline_offset(to_intel_crtc(crtc));
@@ -12662,6 +12630,7 @@ static int intel_atomic_check_crtc(struct drm_crtc *crtc,
memset(&intel_crtc->atomic, 0, sizeof(intel_crtc->atomic));
intel_crtc->atomic.update_wm = mode_changed;
+ intel_crtc->atomic.disable_fbc = mode_changed;
idx = crtc->base.id;
I915_STATE_WARN(crtc->state->active != intel_crtc->active,
@@ -12763,6 +12732,9 @@ static int intel_atomic_check_crtc(struct drm_crtc *crtc,
break;
}
}
+
+ if (mode_changed)
+ intel_crtc->atomic.update_wm = false;
return 0;
}
@@ -12802,8 +12774,13 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
if (intel_crtc->atomic.wait_for_flips)
intel_crtc_wait_for_pending_flips(crtc);
- if (intel_crtc->atomic.disable_fbc)
- intel_fbc_disable(dev);
+ if (intel_crtc->atomic.disable_fbc &&
+ dev_priv->fbc.crtc == intel_crtc) {
+ mutex_lock(&dev->struct_mutex);
+ if (dev_priv->fbc.crtc == intel_crtc)
+ intel_fbc_disable(dev);
+ mutex_unlock(&dev->struct_mutex);
+ }
if (intel_crtc->atomic.pre_disable_primary)
intel_pre_disable_primary(crtc);
@@ -12841,15 +12818,15 @@ static void intel_finish_crtc_commit(struct drm_crtc *crtc)
intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits);
+ if (intel_crtc->atomic.post_enable_primary)
+ intel_post_enable_primary(crtc);
+
if (intel_crtc->atomic.update_fbc) {
mutex_lock(&dev->struct_mutex);
intel_fbc_update(dev);
mutex_unlock(&dev->struct_mutex);
}
- if (intel_crtc->atomic.post_enable_primary)
- intel_post_enable_primary(crtc);
-
drm_for_each_legacy_plane(p, &dev->mode_config.plane_list)
if (intel_crtc->atomic.update_sprite_watermarks & drm_plane_index(p))
intel_update_sprite_watermarks(p, crtc, 0, 0, 0,
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2015-04-23 6:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-22 11:24 [PATCH RFC 0/5] Convert planes and crtc state updates to atomic maarten.lankhorst
2015-04-22 11:24 ` [PATCH RFC 1/5] drm/i915: Get rid of intel_crtc_disable and related code maarten.lankhorst
2015-04-24 8:46 ` Ander Conselvan De Oliveira
2015-04-22 11:24 ` [PATCH RFC 2/5] drm/i915: Only update required power domains maarten.lankhorst
2015-04-24 8:47 ` Ander Conselvan De Oliveira
2015-04-22 11:24 ` [PATCH RFC 3/5] drm/i915: use intel_crtc_control everywhere maarten.lankhorst
2015-05-04 13:44 ` Daniel Vetter
2015-04-22 11:24 ` [PATCH RFC 4/5] drm/i915: make plane helpers fully atomic maarten.lankhorst
2015-04-23 6:19 ` [PATCH v2 " Maarten Lankhorst
2015-04-24 8:52 ` Ander Conselvan De Oliveira
2015-04-22 11:24 ` [PATCH RFC 5/5] drm/i915: Implement intel_crtc_toggle using atomic state maarten.lankhorst
2015-04-22 14:18 ` Maarten Lankhorst
2015-04-23 6:23 ` [PATCH v2 " Maarten Lankhorst
2015-04-23 6:29 ` Maarten Lankhorst [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5538913A.6020600@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=ander.conselvan.de.oliveira@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox