missed the changes attached. so adding rb tag

Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>


On 5/5/2015 7:02 PM, Jani Nikula wrote:
> On Tue, 05 May 2015, Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> wrote:
>> two points
>> 1) The eDP spec says Audio is optional so it is allowed to have audio,
>> but i am yet to come across any eDP panel that supports Audio.
>> 2) Also, there is no support for audio in DDI A port as well :)
>>
>> So please change the check to
>>
>> if (!is_edp(encoder))
> Because the actual limitation we have is "no audio on port A" instead of
> "no audio on eDP", I insist we check for port A. Patch below.
>
> BR,
> Jani.
>
>
>  From ca5d2444065ac91db3ad6cfcdbf8a012a4d44556 Mon Sep 17 00:00:00 2001
> From: Jani Nikula <jani.nikula@intel.com>
> Date: Thu, 9 Apr 2015 12:41:53 +0300
> Subject: [PATCH] drm/i915/dp: there is no audio on port A
> Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
> Cc: Jani Nikula <jani.nikula@intel.com>
>
> The eDP port A register on PCH split platforms has a slightly different
> register layout from the other ports, with bit 6 being either alternate
> scrambler reset or reserved, depending on the generation. Our
> misinterpretation of the bit as audio has lead to warning.
>
> Fix this by not enabling audio on port A, since none of our platforms
> support audio on port A anyway.
>
> v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani)
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958
> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
>   drivers/gpu/drm/i915/intel_dp.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index caeb6ed99ad2..b61bf9b2f76f 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1361,7 +1361,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>   
>   	pipe_config->has_dp_encoder = true;
>   	pipe_config->has_drrs = false;
> -	pipe_config->has_audio = intel_dp->has_audio;
> +	pipe_config->has_audio = intel_dp->has_audio && port != PORT_A;
>   
>   	if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
>   		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
> @@ -2234,8 +2234,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
>   	int dotclock;
>   
>   	tmp = I915_READ(intel_dp->output_reg);
> -	if (tmp & DP_AUDIO_OUTPUT_ENABLE)
> -		pipe_config->has_audio = true;
> +
> +	pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A;
>   
>   	if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
>   		if (tmp & DP_SYNC_HS_HIGH)

-- 
regards,
Sivakumar