Re: [PATCH v3.5 03/22] drm/i915: use intel_crtc_control everywhere, v3.

[Maarten Lankhorst <maarten.lankhorst@linux.intel.com>]

Having a single path for everything makes it a lot easier to keep
crtc_state->active in sync with intel_crtc->active.

A crtc cannot be changed to active when not enabled, because it means
no mode is set and no connectors are connected.

This should also make intel_crtc->active match crtc_state->active.

Changes since v1:
- Reworded commit message, there's no intel_crtc_toggle.
Changes since v2:
- Change some callers of intel_crtc_control to intel_display_suspend.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c  | 18 ++++++++++--
 drivers/gpu/drm/i915/intel_display.c | 54 +++++++++++++-----------------------
 drivers/gpu/drm/i915/intel_drv.h     |  1 -
 3 files changed, 35 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index a32b669bab89..8bf21e8abd93 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3606,12 +3606,18 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 	 */
 	if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
 	    !crtc->config->pch_pfit.enabled) {
+		bool active = crtc->active;
+
+		if (active)
+			intel_crtc_control(&crtc->base, false);
+
 		crtc->config->pch_pfit.force_thru = true;
 
 		intel_display_power_get(dev_priv,
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
-		intel_crtc_reset(crtc);
+		if (active)
+			intel_crtc_control(&crtc->base, true);
 	}
 	drm_modeset_unlock_all(dev);
 }
@@ -3630,12 +3636,18 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 	 * routing.
 	 */
 	if (crtc->config->pch_pfit.force_thru) {
-		crtc->config->pch_pfit.force_thru = false;
+		bool active = crtc->active;
 
-		intel_crtc_reset(crtc);
+		if (active)
+			intel_crtc_control(&crtc->base, false);
+
+		crtc->config->pch_pfit.force_thru = false;
 
 		intel_display_power_put(dev_priv,
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+
+		if (active)
+			intel_crtc_control(&crtc->base, true);
 	}
 	drm_modeset_unlock_all(dev);
 }
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8d50c4ca561f..7d386561531f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3189,19 +3189,6 @@ static void intel_update_primary_planes(struct drm_device *dev)
 	}
 }
 
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
-	if (!crtc->active)
-		return;
-
-	intel_crtc_disable_planes(&crtc->base);
-	dev_priv->display.crtc_disable(&crtc->base);
-	dev_priv->display.crtc_enable(&crtc->base);
-	intel_crtc_enable_planes(&crtc->base);
-}
-
 void intel_prepare_reset(struct drm_device *dev)
 {
 	/* no reset support for gen2 */
@@ -3213,7 +3200,6 @@ void intel_prepare_reset(struct drm_device *dev)
 		return;
 
 	drm_modeset_lock_all(dev);
-
 	/*
 	 * Disabling the crtcs gracefully seems nicer. Also the
 	 * g33 docs say we should at least disable all the planes.
@@ -6036,26 +6022,29 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
 	enum intel_display_power_domain domain;
 	unsigned long domains;
 
+	if (enable == intel_crtc->active)
+		return;
+
+	if (enable && !crtc->state->enable)
+		return;
+
+	crtc->state->active = enable;
 	if (enable) {
-		if (!intel_crtc->active) {
-			domains = get_crtc_power_domains(crtc);
-			for_each_power_domain(domain, domains)
-				intel_display_power_get(dev_priv, domain);
-			intel_crtc->enabled_power_domains = domains;
+		domains = get_crtc_power_domains(crtc);
+		for_each_power_domain(domain, domains)
+			intel_display_power_get(dev_priv, domain);
+		intel_crtc->enabled_power_domains = domains;
 
-			dev_priv->display.crtc_enable(crtc);
-			intel_crtc_enable_planes(crtc);
-		}
+		dev_priv->display.crtc_enable(crtc);
+		intel_crtc_enable_planes(crtc);
 	} else {
-		if (intel_crtc->active) {
-			intel_crtc_disable_planes(crtc);
-			dev_priv->display.crtc_disable(crtc);
+		intel_crtc_disable_planes(crtc);
+		dev_priv->display.crtc_disable(crtc);
 
-			domains = intel_crtc->enabled_power_domains;
-			for_each_power_domain(domain, domains)
-				intel_display_power_put(dev_priv, domain);
-			intel_crtc->enabled_power_domains = 0;
-		}
+		domains = intel_crtc->enabled_power_domains;
+		for_each_power_domain(domain, domains)
+			intel_display_power_put(dev_priv, domain);
+		intel_crtc->enabled_power_domains = 0;
 	}
 }
 
@@ -6072,8 +6061,6 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
 		enable |= intel_encoder->connectors_active;
 
 	intel_crtc_control(crtc, enable);
-
-	crtc->state->active = enable;
 }
 
 void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -14565,8 +14552,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		plane = crtc->plane;
 		to_intel_plane_state(crtc->base.primary->state)->visible = true;
 		crtc->plane = !plane;
-		intel_crtc_disable_planes(&crtc->base);
-		dev_priv->display.crtc_disable(&crtc->base);
+		intel_crtc_control(&crtc->base, false);
 		crtc->plane = plane;
 
 		/* ... and break all links. */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c24d670529e3..14685abf1b3d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -994,7 +994,6 @@ void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
 void intel_display_suspend(struct drm_device *dev);
 void intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_reset(struct intel_crtc *crtc);
 void intel_crtc_update_dpms(struct drm_crtc *crtc);
 void intel_encoder_destroy(struct drm_encoder *encoder);
 int intel_connector_init(struct intel_connector *);
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx