From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: [PATCH v3.6 20/22] drm/i915: Calculate haswell plane workaround, v4.
Date: Tue, 26 May 2015 10:36:14 +0200 [thread overview]
Message-ID: <5564307E.60205@linux.intel.com> (raw)
In-Reply-To: <1432137874-20543-11-git-send-email-maarten.lankhorst@linux.intel.com>
This needs to be a global check because at the time of crtc checking
not all modesets have to be calculated yet. Use intel_crtc->atomic
because there's no reason to keep it in state.
Changes since v1:
- Use intel_crtc->atomic as a place to put hsw_workaround_pipe.
- Make sure quirk only applies to haswell.
- Use first loop to iterate over newly enabled crtc's only.
This increases readability.
Changes since v2:
- Move hsw_workaround_pipe back to crtc_state.
Changes since v3:
- Return errors from haswell_mode_set_planes_workaround.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 109 +++++++++++++++++++++++++----------
drivers/gpu/drm/i915/intel_drv.h | 3 +
2 files changed, 80 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index de13c1c14c93..f6733a777590 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4867,42 +4867,15 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
- /* We want to get the other_active_crtc only if there's only 1 other
- * active crtc. */
- for_each_intel_crtc(dev, crtc_it) {
- if (!crtc_it->active || crtc_it == crtc)
- continue;
-
- if (other_active_crtc)
- return;
-
- other_active_crtc = crtc_it;
- }
- if (!other_active_crtc)
- return;
-
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
static void haswell_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
+ int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->state);
if (WARN_ON(intel_crtc->active))
return;
@@ -4979,7 +4952,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
- haswell_mode_set_planes_workaround(intel_crtc);
+ hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+ if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ }
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -12169,6 +12146,71 @@ static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
return ret;
}
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
+{
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct intel_crtc_state *first_crtc_state = NULL;
+ struct intel_crtc_state *other_crtc_state = NULL;
+ enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+ int i;
+
+ /* look at all crtc's that are going to be enabled in during modeset */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ intel_crtc = to_intel_crtc(crtc);
+
+ if (!crtc_state->active || !needs_modeset(crtc_state))
+ continue;
+
+ if (first_crtc_state) {
+ other_crtc_state = to_intel_crtc_state(crtc_state);
+ break;
+ } else {
+ first_crtc_state = to_intel_crtc_state(crtc_state);
+ first_pipe = intel_crtc->pipe;
+ }
+ }
+
+ /* No workaround needed? */
+ if (!first_crtc_state)
+ return 0;
+
+ /* w/a possibly needed, check how many crtc's are already enabled. */
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ struct intel_crtc_state *pipe_config;
+
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config))
+ return PTR_ERR(pipe_config);
+
+ pipe_config->hsw_workaround_pipe = INVALID_PIPE;
+
+ if (!pipe_config->base.active ||
+ needs_modeset(&pipe_config->base))
+ continue;
+
+ /* 2 or more enabled crtcs means no need for w/a */
+ if (enabled_pipe != INVALID_PIPE)
+ return 0;
+
+ enabled_pipe = intel_crtc->pipe;
+ }
+
+ if (enabled_pipe != INVALID_PIPE)
+ first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+ else if (other_crtc_state)
+ other_crtc_state->hsw_workaround_pipe = first_pipe;
+
+ return 0;
+}
+
/* Code that should eventually be part of atomic_check() */
static int __intel_set_mode_checks(struct drm_atomic_state *state)
{
@@ -12192,7 +12234,10 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
if (ret)
return ret;
- return 0;
+ if (IS_HASWELL(dev))
+ ret = haswell_mode_set_planes_workaround(state);
+
+ return ret;
}
static int
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 665e249ae8bf..d5f38e3d732b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -443,6 +443,9 @@ struct intel_crtc_state {
int pbn;
struct intel_crtc_scaler_state scaler_state;
+
+ /* w/a for waiting 2 vblanks during crtc enable */
+ enum pipe hsw_workaround_pipe;
};
struct intel_pipe_wm {
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-05-26 8:36 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-20 13:38 [PATCH v3 00/22] drm/i915: Convert to atomic, part 2 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 01/22] drm/i915: get rid of put_shared_dpll Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 02/22] drm/i915: get rid of intel_crtc_disable and related code, v2 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 03/22] drm/i915: use intel_crtc_control everywhere, v2 Maarten Lankhorst
2015-05-21 12:33 ` [PATCH v3.5 02.5/22] drm/i915: add intel_display_suspend Maarten Lankhorst
2015-05-22 23:03 ` Matt Roper
2015-05-25 6:47 ` Maarten Lankhorst
2015-05-26 8:31 ` [PATCH v3.6 02.5/22] drm/i915: add intel_display_suspend, v2 Maarten Lankhorst
2015-05-21 12:34 ` [PATCH v3.5 03/22] drm/i915: use intel_crtc_control everywhere, v3 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 04/22] drm/i915: Use drm_atomic_helper_update_legacy_modeset_state, v2 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 05/22] drm/i915: Make __intel_set_mode() take only atomic state as argument Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 06/22] drm/i915: Set mode_changed for audio in intel_modeset_pipe_config() Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 07/22] drm/i915: Use crtc_state->active instead of crtc_state->enable Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 08/22] drm/i915: Zap call to drm_plane_helper_disable Maarten Lankhorst
2015-05-28 1:37 ` Matt Roper
2015-05-28 7:22 ` Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 09/22] drm/i915: calculate primary visibility changes instead of calling from set_config Maarten Lankhorst
2015-05-20 16:04 ` [PATCH v3 10/22] drm/i915: Support modeset across multiple pipes maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 11/22] drm/i915: Use global atomic state for staged pll config, v2 maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 12/22] drm/i915: Use drm_atomic_helper_swap_state in intel_atomic_commit maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 13/22] drm/i915: Swap planes on each crtc separately maarten.lankhorst
2015-05-29 0:56 ` Matt Roper
2015-05-20 16:04 ` [PATCH v3 14/22] drm/i915: Move cdclk and pll setup to intel_modeset_compute_config() maarten.lankhorst
2015-05-29 0:55 ` Matt Roper
2015-06-01 6:31 ` Maarten Lankhorst
2015-05-20 16:04 ` [PATCH v3 15/22] drm/i915: Read hw state into an atomic state struct maarten.lankhorst
2015-05-27 5:30 ` Maarten Lankhorst
2015-05-27 11:26 ` Daniel Vetter
2015-05-29 0:55 ` Matt Roper
2015-06-01 6:35 ` Maarten Lankhorst
2015-05-20 16:04 ` [PATCH v3 16/22] drm/i915: Implement intel_crtc_control using atomic state, v3 maarten.lankhorst
2015-05-21 12:40 ` [PATCH v3.5 16.5/22] drm/i915: Make intel_display_suspend atomic Maarten Lankhorst
2015-05-26 8:33 ` [PATCH v3.6 16.5/22] drm/i915: Make intel_display_suspend atomic, v2 Maarten Lankhorst
2015-05-26 8:35 ` [PATCH v3.6 16/22] drm/i915: Implement intel_crtc_control using atomic state, v4 Maarten Lankhorst
2015-05-29 0:57 ` Matt Roper
2015-06-01 6:39 ` Maarten Lankhorst
2015-05-20 16:04 ` [PATCH v3 17/22] drm/i915: move swap state to the right place maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 18/22] drm/i915: Use crtc->hwmode for vblanks, v2 maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 19/22] drm/i915: Remove use of crtc->config from i915_debugfs.c maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 20/22] drm/i915: Calculate haswell plane workaround, v3 maarten.lankhorst
2015-05-26 8:36 ` Maarten Lankhorst [this message]
2015-05-29 0:58 ` [PATCH v3.6 20/22] drm/i915: Calculate haswell plane workaround, v4 Matt Roper
2015-05-20 16:04 ` [PATCH v3 21/22] drm/i915: Use atomic state for calculating DVO_2X_MODE on i830 maarten.lankhorst
2015-05-20 16:04 ` [PATCH v3 22/22] drm/i915: use calculated state for vblank evasion maarten.lankhorst
2015-05-29 1:23 ` [PATCH v3 00/22] drm/i915: Convert to atomic, part 2 Matt Roper
2015-06-01 8:11 ` Ander Conselvan De Oliveira
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5564307E.60205@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox