From: "Michel Dänzer" <michel@daenzer.net>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@intel.com>,
Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
DRI Development <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH 2/3] drm/radeon: Switch to drm_vblank_on/off
Date: Thu, 28 May 2015 16:11:53 +0900 [thread overview]
Message-ID: <5566BFB9.1000100@daenzer.net> (raw)
In-Reply-To: <20150527094144.GT12971@phenom.ffwll.local>
On 27.05.2015 18:41, Daniel Vetter wrote:
> On Wed, May 27, 2015 at 06:21:24PM +0900, Michel Dänzer wrote:
>> On 27.05.2015 18:04, Daniel Vetter wrote:
>>> These should be functionally equivalent to the older per/post modeset
>>> functions, except that they block out drm_vblank_get right away.
>>> There's only the clock adjusting code (outside of pageflips) in
>>> readone which uses drm_vblank_get. But that code doesn't synchronize
>>> against concurrent modesets and instead handles any such races by
>>> waiting for the right vblank to arrive with a short timetout.
>>>
>>> The longer-term plan here is to switch all kms drivers to
>>> drm_vblank_on/off so that common code like pending event cleanup can
>>> be done there, while drm_vblank_pre/post_modeset will be purely
>>> drm internal for the old UMS ioctl.
>>>
>>> Note that the kerneldoc for pre/post_modeset is wrong since as Michel
>>> Dänzer correctly pointed out it works if only using pre/post_modeset.
>>> The trouble that lead to this comment is the very old version of
>>> drm_vblank_off to clear out pending events when disabling a pipe,
>>> which did seem to wreak havoc with the trick used by pre/post_modeset.
>>> Michel also expressed dissatisfaction with intel folks pushing new
>>> interfaces with bogus justifications. I still maintain that having a
>>> consistent set of vblank behaviour across kms drivers, separate from
>>> any old UMS functions is a useful goal.
>>>
>>> Cc: Michel Dänzer <michel.daenzer@amd.com>
>>> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
>>
>> Can you describe at least one tangible benefit this change provides for
>> the radeon driver?
>>
>> Because I'm afraid that this might cause subtle breakage, and since we
>> don't have any rigorous tests for this like in intel-gpu-tools (yet?),
>> it might be painful to track it down.
>>
>> So, I'd like to have a good reason for taking the risk.
>
> right now at most a bit of code to clean out pending events on modeset
> disable, for somewhat consistent behaviour with other drivers. But in
> general it's fairly ill-defined what happens with vblank events.
Yeah, while that's nice to have, I don't think it makes too much
difference in practice.
Anyway, I'm giving this patch a spin, and it does indeed cause userspace
fallout, at least with DRI3/Present enabled, because the vblank and
pageflip ioctls now return -EINVAL while the CRTC is off. However, it
looks like fixing that up might not be too bad, so I'm cautiously
optimistic for this change. But I'd like some more time for testing and
fixing userspace.
--
Earthling Michel Dänzer | http://www.amd.com
Libre software enthusiast | Mesa and X developer
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-05-28 7:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 9:04 [PATCH 1/3] drm/nouveau: Use drm_vblank_on/off consistently Daniel Vetter
2015-05-27 9:04 ` [PATCH 2/3] drm/radeon: Switch to drm_vblank_on/off Daniel Vetter
2015-05-27 9:21 ` Michel Dänzer
2015-05-27 9:41 ` Daniel Vetter
2015-05-28 7:11 ` Michel Dänzer [this message]
2015-05-28 8:38 ` Daniel Vetter
2015-05-28 9:03 ` Michel Dänzer
2015-07-14 8:13 ` Michel Dänzer
2015-05-27 9:04 ` [PATCH 3/3] drm/irq: Make drm_vblank_pre/post_modeset internal Daniel Vetter
2015-05-29 16:50 ` [PATCH 1/3] drm/nouveau: Use drm_vblank_on/off consistently Mario Kleiner
2015-05-29 17:19 ` Daniel Vetter
2015-05-29 17:23 ` Mario Kleiner
2015-05-29 17:35 ` Daniel Vetter
2015-06-05 19:40 ` Mario Kleiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5566BFB9.1000100@daenzer.net \
--to=michel@daenzer.net \
--cc=daniel.vetter@intel.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox