public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Jindal, Sonika" <sonika.jindal@intel.com>
To: Sonika Jindal <sonika.jindal@intel.com>,
	intel-gfx <intel-gfx@lists.freedesktop.org>,
	vandana.kannan@intel.com
Subject: Re: [PATCH] drm/i915/bxt: edp1.4 Intermediate Freq support
Date: Wed, 03 Jun 2015 10:49:57 +0530	[thread overview]
Message-ID: <556E8E7D.9080509@intel.com> (raw)
In-Reply-To: <1432642813-6917-1-git-send-email-sonika.jindal@intel.com>

Hi Vandana,

Can you please review the v6 of this patch?

This was rebased recently on top of your patch:
  commit b6dc71f38a84e36c5445b95f9f7a2dac6b25636f
  Author: Vandana Kannan <vandana.kannan@intel.com>
  Date:   Wed May 13 12:18:52 2015 +0530

       drm/i915/bxt: Port PLL programming BUN

Thanks,
Sonika

On 5/26/2015 5:50 PM, Sonika Jindal wrote:
> BXT supports following intermediate link rates for edp:
> 2.16GHz, 2.43GHz, 3.24GHz, 4.32GHz.
> Adding support for programming the intermediate rates.
>
> v2: Adding clock in bxt_clk_div struct and then look for the entry with
> required rate (Ville)
> v3: 'clock' has the selected value, no need to use link_bw or rate_select
> for selecting pll(Ville)
> v4: Make bxt_dp_clk_val const and remove size (Ville)
> v5: Rebased
> v6: Removed setting of vco while rebasing in v5, adding it back
>
> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>(v4)
> ---
>   drivers/gpu/drm/i915/intel_ddi.c |   39 ++++++++++++++++----------------------
>   drivers/gpu/drm/i915/intel_dp.c  |    7 ++++++-
>   2 files changed, 22 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index cacb07b..2a2518d 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1334,6 +1334,7 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
>
>   /* bxt clock parameters */
>   struct bxt_clk_div {
> +	int clock;
>   	uint32_t p1;
>   	uint32_t p2;
>   	uint32_t m2_int;
> @@ -1343,14 +1344,14 @@ struct bxt_clk_div {
>   };
>
>   /* pre-calculated values for DP linkrates */
> -static struct bxt_clk_div bxt_dp_clk_val[7] = {
> -	/* 162 */ {4, 2, 32, 1677722, 1, 1},
> -	/* 270 */ {4, 1, 27,       0, 0, 1},
> -	/* 540 */ {2, 1, 27,       0, 0, 1},
> -	/* 216 */ {3, 2, 32, 1677722, 1, 1},
> -	/* 243 */ {4, 1, 24, 1258291, 1, 1},
> -	/* 324 */ {4, 1, 32, 1677722, 1, 1},
> -	/* 432 */ {3, 1, 32, 1677722, 1, 1}
> +static const struct bxt_clk_div bxt_dp_clk_val[] = {
> +	{162000, 4, 2, 32, 1677722, 1, 1},
> +	{270000, 4, 1, 27,       0, 0, 1},
> +	{540000, 2, 1, 27,       0, 0, 1},
> +	{216000, 3, 2, 32, 1677722, 1, 1},
> +	{243000, 4, 1, 24, 1258291, 1, 1},
> +	{324000, 4, 1, 32, 1677722, 1, 1},
> +	{432000, 3, 1, 32, 1677722, 1, 1}
>   };
>
>   static bool
> @@ -1390,22 +1391,14 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>   		vco = best_clock.vco;
>   	} else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
>   			intel_encoder->type == INTEL_OUTPUT_EDP) {
> -		struct drm_encoder *encoder = &intel_encoder->base;
> -		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +		int i;
>
> -		switch (intel_dp->link_bw) {
> -		case DP_LINK_BW_1_62:
> -			clk_div = bxt_dp_clk_val[0];
> -			break;
> -		case DP_LINK_BW_2_7:
> -			clk_div = bxt_dp_clk_val[1];
> -			break;
> -		case DP_LINK_BW_5_4:
> -			clk_div = bxt_dp_clk_val[2];
> -			break;
> -		default:
> -			clk_div = bxt_dp_clk_val[0];
> -			DRM_ERROR("Unknown link rate\n");
> +		clk_div = bxt_dp_clk_val[0];
> +		for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) {
> +			if (bxt_dp_clk_val[i].clock == clock) {
> +				clk_div = bxt_dp_clk_val[i];
> +				break;
> +			}
>   		}
>   		vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2;
>   	}
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index abd442a..bd0f958 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -91,6 +91,8 @@ static const struct dp_link_dpll chv_dpll[] = {
>   		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
>   };
>
> +static const int bxt_rates[] = { 162000, 216000, 243000, 270000,
> +				  324000, 432000, 540000 };
>   static const int skl_rates[] = { 162000, 216000, 270000,
>   				  324000, 432000, 540000 };
>   static const int chv_rates[] = { 162000, 202500, 210000, 216000,
> @@ -1170,7 +1172,10 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
>   static int
>   intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
>   {
> -	if (IS_SKYLAKE(dev)) {
> +	if (IS_BROXTON(dev)) {
> +		*source_rates = bxt_rates;
> +		return ARRAY_SIZE(bxt_rates);
> +	} else if (IS_SKYLAKE(dev)) {
>   		*source_rates = skl_rates;
>   		return ARRAY_SIZE(skl_rates);
>   	} else if (IS_CHERRYVIEW(dev)) {
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-06-03  5:19 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-07  4:22 [PATCH 1/3] drm/i915: Sink rate read should be saved in deca-kHz Sonika Jindal
2015-05-07  4:22 ` [PATCH 2/3] drm/i915: Rename dp rates array as per platform Sonika Jindal
2015-05-07  8:35   ` Ville Syrjälä
2015-05-07 13:19     ` Daniel Vetter
2015-05-07  4:22 ` [PATCH 3/3] drm/i915/bxt: edp1.4 Intermediate Freq support Sonika Jindal
2015-05-07  8:41   ` Ville Syrjälä
2015-05-07  8:57     ` Jindal, Sonika
2015-05-07 11:06       ` [PATCH] " Sonika Jindal
2015-05-07 15:34         ` Ville Syrjälä
2015-05-08  5:34           ` Sonika Jindal
2015-05-08 12:26             ` Ville Syrjälä
2015-05-11  7:51               ` Sonika Jindal
2015-05-11  9:51                 ` Daniel Vetter
2015-05-14 13:30                 ` shuang.he
2015-05-26  9:21               ` Sonika Jindal
2015-05-26  9:48                 ` Daniel Vetter
2015-05-26  9:57                   ` Jani Nikula
2015-05-26  9:59                     ` Daniel Vetter
2015-05-26 10:21                       ` Jindal, Sonika
2015-05-26 12:20                         ` Sonika Jindal
2015-06-03  5:19                           ` Jindal, Sonika [this message]
2015-06-03  6:31                           ` Kannan, Vandana
2015-06-03  8:00                             ` Jani Nikula
2015-05-26  9:54                 ` Jani Nikula
2015-05-08 19:30             ` shuang.he
2015-05-08  7:39         ` shuang.he
2015-05-07 19:04   ` [PATCH 3/3] " shuang.he
2015-05-07  8:10 ` [PATCH 1/3] drm/i915: Sink rate read should be saved in deca-kHz Jani Nikula
2015-05-07  8:34   ` Ville Syrjälä
2015-05-07  8:29     ` [PATCH] " Sonika Jindal
2015-05-07  8:58       ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=556E8E7D.9080509@intel.com \
    --to=sonika.jindal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=vandana.kannan@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox