From: "Jindal, Sonika" <sonika.jindal@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 4/5] drm/i915: Check live status before reading edid
Date: Fri, 10 Jul 2015 10:01:51 +0530 [thread overview]
Message-ID: <559F4AB7.2040401@intel.com> (raw)
In-Reply-To: <20150709172757.GE7410@phenom.ffwll.local>
On 7/9/2015 10:57 PM, Daniel Vetter wrote:
> On Thu, Jul 09, 2015 at 05:34:29PM +0530, Sonika Jindal wrote:
>> Adding this for SKL onwards.
>>
>> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
>
> I think this is the critical piece really, and I'd like to roll it out for
> all platforms. git has the code for all the old ones, so no big deal to
> digg that out. Also we need your fix for the interrupt handling first ofc,
> otherwise this won't work.
>
We have tested this with VLV/CHV too, and it works fine. I'l add those
platforms also in the next version of this patch and change the gen
check in the next patch as well.
> Then we can apply this and give it some good testing before we start
> relying on it with caching hdmi probe status. I know this means that
> things will be slower, but I've been burned a bit too much the last few
> times we've tried this. And I really think we need the most amount of
> testing we can get (hence rolling this out for all platforms). If your
> hpd irq handling bugfix is indeed the bug that will be confirmed quickly,
> otherwise it means back to debugging.
>
>> ---
>> drivers/gpu/drm/i915/intel_hdmi.c | 49 ++++++++++++++++++++++++++++++++++---
>> 1 file changed, 45 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
>> index 1fb6919..769cf4f 100644
>> --- a/drivers/gpu/drm/i915/intel_hdmi.c
>> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
>> @@ -1300,6 +1300,46 @@ intel_hdmi_unset_edid(struct drm_connector *connector)
>> to_intel_connector(connector)->detect_edid = NULL;
>> }
>>
>> +static bool intel_hdmi_live_status(struct intel_digital_port *intel_dig_port)
>> +{
>> + struct drm_device *dev = intel_dig_port->base.base.dev;
>> + struct drm_i915_private *dev_priv = to_i915(dev);
>> + enum port port = intel_dig_port->port;
>> +
>> + if (IS_SKYLAKE(dev)) {
>> + u32 temp = I915_READ(SDEISR);
>> +
>> + switch (port) {
>> + case PORT_B:
>> + return temp & SDE_PORTB_HOTPLUG_CPT;
>> +
>> + case PORT_C:
>> + return temp & SDE_PORTC_HOTPLUG_CPT;
>> +
>> + case PORT_D:
>> + return temp & SDE_PORTD_HOTPLUG_CPT;
>> +
>> + default:
>> + return false;
>> + }
>
> The old code had per-platform helper functions for this instead of a big
> if-ladder. I think that would look better.
>
Hmm, I see g4x_digital_port_connected and ibx_digital_port_connected
which already checks for these bits. We can reuse that here instead.
I'l send the next version.
Thanks,
Sonika
> Also when you digg out these old versions please also cite the commit sha1
> of the patches where we had to last revert this (and explain why it's now
> save).
> -Daniel
>
>> + } else if (IS_BROXTON(dev)) {
>> + u32 temp = I915_READ(GEN8_DE_PORT_ISR);
>> +
>> + switch (port) {
>> + case PORT_B:
>> + return temp & BXT_DE_PORT_HP_DDIB;
>> +
>> + case PORT_C:
>> + return temp & BXT_DE_PORT_HP_DDIC;
>> +
>> + default:
>> + return false;
>> +
>> + }
>> + }
>> + return true;
>> +}
>> +
>> static bool
>> intel_hdmi_set_edid(struct drm_connector *connector)
>> {
>> @@ -1308,15 +1348,16 @@ intel_hdmi_set_edid(struct drm_connector *connector)
>> struct intel_encoder *intel_encoder =
>> &hdmi_to_dig_port(intel_hdmi)->base;
>> enum intel_display_power_domain power_domain;
>> - struct edid *edid;
>> + struct edid *edid = NULL;
>> bool connected = false;
>>
>> power_domain = intel_display_port_power_domain(intel_encoder);
>> intel_display_power_get(dev_priv, power_domain);
>>
>> - edid = drm_get_edid(connector,
>> - intel_gmbus_get_adapter(dev_priv,
>> - intel_hdmi->ddc_bus));
>> + if (intel_hdmi_live_status(hdmi_to_dig_port(intel_hdmi)))
>> + edid = drm_get_edid(connector,
>> + intel_gmbus_get_adapter(dev_priv,
>> + intel_hdmi->ddc_bus));
>>
>> intel_display_power_put(dev_priv, power_domain);
>>
>> --
>> 1.7.10.4
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-07-10 4:31 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-09 12:04 [PATCH 0/5] HDMI optimization series Sonika Jindal
2015-07-09 12:04 ` [PATCH 1/5] drm/i915: add attached connector to hdmi container Sonika Jindal
2015-07-09 12:04 ` [PATCH 2/5] drm/i915: Add HDMI probe function Sonika Jindal
2015-07-09 12:04 ` [PATCH 3/5] drm/i915: Read HDMI EDID only when required Sonika Jindal
2015-07-09 12:04 ` [PATCH 4/5] drm/i915: Check live status before reading edid Sonika Jindal
2015-07-09 17:27 ` Daniel Vetter
2015-07-10 4:31 ` Jindal, Sonika [this message]
2015-07-13 11:05 ` [PATCH] " Sonika Jindal
2015-07-13 14:55 ` Daniel Vetter
2015-07-14 4:46 ` Jindal, Sonika
2015-07-14 7:55 ` Daniel Vetter
2016-07-12 11:39 ` [PATCH 4/5] " David Weinehall
2016-07-13 11:59 ` Daniel Vetter
2016-07-13 12:09 ` Chris Wilson
2016-07-13 12:17 ` Chris Wilson
2016-07-14 17:42 ` David Weinehall
2016-08-01 10:09 ` Chris Wilson
2016-08-02 14:32 ` Chris Wilson
2016-08-02 15:04 ` Jindal, Sonika
2015-07-09 12:04 ` [PATCH 5/5] drm/i915: Set edid from detect only if forced Sonika Jindal
2015-07-09 15:24 ` shuang.he
2015-07-13 10:49 ` [PATCH] drm/i915: Set edid from init and not from detect Sonika Jindal
2015-07-13 11:40 ` Chris Wilson
2015-07-13 11:59 ` Jindal, Sonika
2015-07-13 14:57 ` Daniel Vetter
2015-07-14 3:48 ` Sharma, Shashank
2015-07-14 7:59 ` Daniel Vetter
2015-07-14 8:09 ` Sharma, Shashank
2015-07-14 9:03 ` Daniel Vetter
2015-07-14 11:33 ` Sharma, Shashank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559F4AB7.2040401@intel.com \
--to=sonika.jindal@intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox