Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>


On 6/29/2015 5:55 PM, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> The pipe A power well is the "disp2d" well on CHV and pipe B and C wells
> don't even exist. Thereforce we can remove the checks for pipe A vs.
> others and just assume it's always pipe A.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>   drivers/gpu/drm/i915/intel_runtime_pm.c | 47 ++++++++++++++-------------------
>   1 file changed, 20 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 932d963..1bd947a 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -1042,53 +1042,46 @@ out:
>   static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
>   					struct i915_power_well *power_well)
>   {
> +	WARN_ON_ONCE(power_well->data != PIPE_A);
> +
>   	chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
>   }
>   
>   static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
>   				       struct i915_power_well *power_well)
>   {
> -	WARN_ON_ONCE(power_well->data != PIPE_A &&
> -		     power_well->data != PIPE_B &&
> -		     power_well->data != PIPE_C);
> +	WARN_ON_ONCE(power_well->data != PIPE_A);
>   
>   	chv_set_pipe_power_well(dev_priv, power_well, true);
>   
> -	if (power_well->data == PIPE_A) {
> -		spin_lock_irq(&dev_priv->irq_lock);
> -		valleyview_enable_display_irqs(dev_priv);
> -		spin_unlock_irq(&dev_priv->irq_lock);
> +	spin_lock_irq(&dev_priv->irq_lock);
> +	valleyview_enable_display_irqs(dev_priv);
> +	spin_unlock_irq(&dev_priv->irq_lock);
>   
> -		/*
> -		 * During driver initialization/resume we can avoid restoring the
> -		 * part of the HW/SW state that will be inited anyway explicitly.
> -		 */
> -		if (dev_priv->power_domains.initializing)
> -			return;
> +	/*
> +	 * During driver initialization/resume we can avoid restoring the
> +	 * part of the HW/SW state that will be inited anyway explicitly.
> +	 */
> +	if (dev_priv->power_domains.initializing)
> +		return;
>   
> -		intel_hpd_init(dev_priv);
> +	intel_hpd_init(dev_priv);
>   
> -		i915_redisable_vga_power_on(dev_priv->dev);
> -	}
> +	i915_redisable_vga_power_on(dev_priv->dev);
>   }
>   
>   static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
>   					struct i915_power_well *power_well)
>   {
> -	WARN_ON_ONCE(power_well->data != PIPE_A &&
> -		     power_well->data != PIPE_B &&
> -		     power_well->data != PIPE_C);
> -
> -	if (power_well->data == PIPE_A) {
> -		spin_lock_irq(&dev_priv->irq_lock);
> -		valleyview_disable_display_irqs(dev_priv);
> -		spin_unlock_irq(&dev_priv->irq_lock);
> -	}
> +	WARN_ON_ONCE(power_well->data != PIPE_A);
> +
> +	spin_lock_irq(&dev_priv->irq_lock);
> +	valleyview_disable_display_irqs(dev_priv);
> +	spin_unlock_irq(&dev_priv->irq_lock);
>   
>   	chv_set_pipe_power_well(dev_priv, power_well, false);
>   
> -	if (power_well->data == PIPE_A)
> -		vlv_power_sequencer_reset(dev_priv);
> +	vlv_power_sequencer_reset(dev_priv);
>   }
>   
>   /**

-- 
regards,
Sivakumar