Re: [PATCH] drm/i915/bxt: WA for swapped HPD pins in A stepping

["Jindal, Sonika" <sonika.jindal@intel.com>]

On 7/22/2015 5:01 PM, Sivakumar Thulasimani wrote:
>
>
> On 7/22/2015 4:39 PM, Jindal, Sonika wrote:
>>
>>
>> On 7/22/2015 4:03 PM, Sivakumar Thulasimani wrote:
>>>
>>>
>>> On 7/22/2015 3:37 PM, Sonika Jindal wrote:
>>>> As per bspec, on BXT A0/A1, sw needs to activate DDIA HPD logic
>>>> and interrupts to check the external panel connection and DDIC HPD
>>>> logic for edp panel.
>>>>
>>>> v2: For DP, irq_port is used to determine the encoder instead of
>>>> hpd_pin and removing the edp HPD logic because port A HPD is not
>>>> present(Imre)
>>>> v3: Rebased on top of Imre's patchset for enabling HPD on PORT A.
>>>> Added hpd_pin swapping for intel_dp_init_connector, setting encoder
>>>> for PORT_A as per the WA in irq_port (Imre)
>>>>
>>>> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
>>>> ---
>>>>   drivers/gpu/drm/i915/intel_ddi.c  |   12 +++++++++++-
>>>>   drivers/gpu/drm/i915/intel_dp.c   |    4 ++++
>>>>   drivers/gpu/drm/i915/intel_hdmi.c |    9 ++++++++-
>>>>   3 files changed, 23 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
>>>> b/drivers/gpu/drm/i915/intel_ddi.c
>>>> index e2c6f73..d5745e2 100644
>>>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>>>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>>>> @@ -3225,7 +3225,17 @@ void intel_ddi_init(struct drm_device *dev,
>>>> enum port port)
>>>>               goto err;
>>>>           intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
>>>> -        dev_priv->hotplug.irq_port[port] = intel_dig_port;
>>>> +        /*
>>>> +         * On BXT A0/A1, sw needs to activate DDIA HPD logic and
>>>> +         * interrupts to check the external panel connection.
>>>> +         */
>>>> +        if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) <
>>>> BXT_REVID_B0)) {
>>>> +            if (port == PORT_B)
>>>> +                dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
>>>> +            else if (port == PORT_A)
>>>> +                dev_priv->hotplug.irq_port[PORT_C] = intel_dig_port;
>>>> +        } else
>>>> +            dev_priv->hotplug.irq_port[port] = intel_dig_port;
>>>>       }
>>>>       /* In theory we don't need the encoder->type check, but leave it
>>>> just in
>>>> diff --git a/drivers/gpu/drm/i915/intel_dp.c
>>>> b/drivers/gpu/drm/i915/intel_dp.c
>>>> index fcc64e5..71679ef 100644
>>>> --- a/drivers/gpu/drm/i915/intel_dp.c
>>>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>>>> @@ -5785,9 +5785,13 @@ intel_dp_init_connector(struct
>>>> intel_digital_port *intel_dig_port,
>>>>       switch (port) {
>>>>       case PORT_A:
>>>>           intel_encoder->hpd_pin = HPD_PORT_A;
>>>> +        if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
>>>> +            intel_encoder->hpd_pin = HPD_PORT_C;
>>>>           break;
>>>>       case PORT_B:
>>>>           intel_encoder->hpd_pin = HPD_PORT_B;
>>>> +        if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
>>>> +            intel_encoder->hpd_pin = HPD_PORT_A;
>>>>           break;
>>>>       case PORT_C:
>>>>           intel_encoder->hpd_pin = HPD_PORT_C;
>>>> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
>>>> b/drivers/gpu/drm/i915/intel_hdmi.c
>>>> index 70bad5b..94fa716 100644
>>>> --- a/drivers/gpu/drm/i915/intel_hdmi.c
>>>> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
>>>> @@ -1973,7 +1973,14 @@ void intel_hdmi_init_connector(struct
>>>> intel_digital_port *intel_dig_port,
>>>>               intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT;
>>>>           else
>>>>               intel_hdmi->ddc_bus = GMBUS_PIN_DPB;
>>>> -        intel_encoder->hpd_pin = HPD_PORT_B;
>>>> +        /*
>>>> +         * On BXT A0/A1, sw needs to activate DDIA HPD logic and
>>>> +         * interrupts to check the external panel connection.
>>>> +         */
>>>> +        if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
>>>> +            intel_encoder->hpd_pin = HPD_PORT_A;
>>>> +        else
>>>> +            intel_encoder->hpd_pin = HPD_PORT_B;
>>>>           break;
>>>>       case PORT_C:
>>>>           if (IS_BROXTON(dev_priv))
>>> bxt_hpd_irq_setup is not touched here without this being updated i dont
>>> think HPD can be enabled.
>> Now, we swap the hpd_pin, which is being used to enable HPD in
>> bxt_hpd_irq_setup.
>>
> yes, but the hpd_pin which is updated to HPD_PORT_A when enters
> bxt_hpd_setup_irq we are enabling
> only HPD B & C. so it will not enable HPDA. unless i am missing some
> patch i am not seeing code to
> enable HPD A with latest nightly code.
>
Yes, you are missing the patch 1 of this series :)
[PATCH 1/2] drm/i915/bxt: Add HPD support for DDIA

>> Regards,
>> Sonika
>>>
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx