Re: [PATCH 07/13 v4] drm/i915: GuC submission setup, phase 1

[Dave Gordon <david.s.gordon@intel.com>]

On 28/07/15 00:12, O'Rourke, Tom wrote:
> On Mon, Jul 27, 2015 at 03:41:31PM -0700, Yu Dai wrote:
>>
>> On 07/24/2015 03:31 PM, O'Rourke, Tom wrote:
>>> [TOR:] When I see "phase 1" I also look for "phase 2".
>>> A subject that better describes the change in this patch
>>> would help.
>>>
>>> On Thu, Jul 09, 2015 at 07:29:08PM +0100, Dave Gordon wrote:
>>>> From: Alex Dai <yu.dai@intel.com>
>>>>
>>>> This adds the first of the data structures used to communicate with the
>>>> GuC (the pool of guc_context structures).
>>>>
>>>> We create a GuC-specific wrapper round the GEM object allocator as all
>>>> GEM objects shared with the GuC must be pinned into GGTT space at an
>>>> address that is NOT in the range [0..WOPCM_SIZE), as that range of GGTT
>>>> addresses is not accessible to the GuC (from the GuC's point of view,
>>>> it's permanently reserved for other objects such as the BootROM & SRAM).
>>> [TOR:] I would like a clarfication on the excluded range.
>>> The excluded range should be 0 to "size for guc within
>>> WOPCM area" and not 0 to "size of WOPCM area".
>>
>> Nope, GGTT range [0..WOPCM_SIZE) should be excluded from GuC usage.
>> BSpec clearly says, from 0 to WOPCM_TOP-1 is for BootROM, SRAM and
>> WOPCM. From WOPCM_TOP and above is GFX DRAM. Be note that, that GGTT
>> space is still available to any gfx obj as long as it is not
>> accessed by GuC (OK to pass through GuC).
>>
> [TOR:] Should we take a closer look at the pin offset bias
> for guc objects?  GUC_WOPCM_SIZE_VALUE is not the full size
> of WOPCM area.

I'm inclined to set the bias to GUC_WOPCM_TOP, and then define that as 
the sum of GUC_WOPCM_OFFSET_VALUE and GUC_WOPCM_SIZE_VALUE. That seems 
to be what the BSpec pages "WriteOnceProtectedContentMemory (WOPCM) 
Management" and "WOPCM Memory Map" suggest, although I think they're 
pretty unclear on the details :(

Do you (both) agree this would be the right value?

[snip]

>>>> +	/* If GuC scheduling is enabled, setup params here. */
>>> [TOR:] I assume from this "GuC scheduling" == "GuC submission".
>>> This is a little confusing.  I recommend either reword
>>> "GuC scheduling" or add comment text to explain.
>>
>> For now, yes the GuC scheduling is only doing the 'submission' work
>> because of the current kernel in-order queue. If we have client
>> direct submission enabled, there WILL BE GuC scheduling inside
>> firmware according to the priority of each queue etc.
>>
>> Thanks,
>> Alex

I changed the line above to "GuC submission", while the one a few lines 
further down now says:

	/* Unmask this bit to enable the GuC's internal scheduler */

to make it quite clear that we're not referring to the host-based GPU 
scheduler curently in review.

.Dave.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx