From: Michel Thierry <michel.thierry@intel.com>
To: "Goel, Akash" <akash.goel@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v6 08/19] drm/i915/gen8: Add 4 level switching infrastructure and lrc support
Date: Thu, 30 Jul 2015 10:36:20 +0100 [thread overview]
Message-ID: <55B9F014.5000507@intel.com> (raw)
In-Reply-To: <55B9A497.3080409@intel.com>
On 7/30/2015 5:14 AM, Goel, Akash wrote:
> On 7/29/2015 9:53 PM, Michel Thierry wrote:
>> @@ -1512,12 +1522,15 @@ static int gen8_emit_bb_start(struct
>> drm_i915_gem_request *req,
>> * Ideally, we should set Force PD Restore in ctx descriptor,
>> * but we can't. Force Restore would be a second option, but
>> * it is unsafe in case of lite-restore (because the ctx is
>> - * not idle). */
>> + * not idle). PML4 is allocated during ppgtt init so this is
>> + * not needed in 48-bit.*/
>> if (req->ctx->ppgtt &&
>> (intel_ring_flag(req->ring) &
>> req->ctx->ppgtt->pd_dirty_rings)) {
>> - ret = intel_logical_ring_emit_pdps(req);
>> - if (ret)
>> - return ret;
>> + if (GEN8_CTX_ADDRESSING_MODE(req->i915) == LEGACY_32B_CONTEXT) {
> Sorry for the late comment.
> For consistency, better to use 'USES_FULL_48BIT_PPGTT' macro only here,
> as that will also imply the same thing i.e. which type of Context
> addressing mode is being used.
>
> Best regards
> Akash
>
Ack. I'm changing it to if (!USES_FULL_48BIT_PPGTT(req->i915)).
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-07-30 9:36 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-29 16:23 [PATCH v6 00/19] 48-bit PPGTT Michel Thierry
2015-07-29 16:23 ` [PATCH v6 01/19] drm/i915: Remove unnecessary gen8_clamp_pd Michel Thierry
2015-07-30 3:06 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 02/19] drm/i915/gen8: Make pdp allocation more dynamic Michel Thierry
2015-07-30 3:18 ` Goel, Akash
2015-08-05 15:31 ` Daniel Vetter
2015-08-05 15:49 ` Michel Thierry
2015-08-05 15:51 ` Michel Thierry
2015-08-06 12:28 ` Daniel Vetter
2015-07-29 16:23 ` [PATCH v6 03/19] drm/i915/gen8: Abstract PDP usage Michel Thierry
2015-07-30 10:02 ` [PATCH v7 " Michel Thierry
2015-07-31 4:11 ` Goel, Akash
2015-08-05 15:33 ` Daniel Vetter
2015-07-29 16:23 ` [PATCH v6 04/19] drm/i915/gen8: Generalize PTE writing for GEN8 PPGTT Michel Thierry
2015-07-30 4:46 ` Goel, Akash
2015-07-30 9:31 ` Michel Thierry
2015-07-30 10:02 ` [PATCH v7 " Michel Thierry
2015-07-31 4:00 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 05/19] drm/i915/gen8: Add dynamic page trace events Michel Thierry
2015-07-30 3:48 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 06/19] drm/i915/gen8: Add PML4 structure Michel Thierry
2015-07-30 4:01 ` Goel, Akash
2015-07-30 9:31 ` Michel Thierry
2015-07-30 10:04 ` [PATCH v7 " Michel Thierry
2015-07-31 4:35 ` Goel, Akash
2015-07-31 12:12 ` [PATCH v8 " Michel Thierry
2015-07-31 17:35 ` Goel, Akash
2015-08-03 8:34 ` Michel Thierry
2015-08-03 8:52 ` [PATCH v9 " Michel Thierry
2015-08-03 9:20 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 07/19] drm/i915/gen8: implement alloc/free for 4lvl Michel Thierry
2015-07-30 10:05 ` [PATCH v7 " Michel Thierry
2015-07-31 4:20 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 08/19] drm/i915/gen8: Add 4 level switching infrastructure and lrc support Michel Thierry
2015-07-30 4:14 ` Goel, Akash
2015-07-30 9:36 ` Michel Thierry [this message]
2015-07-30 10:06 ` [PATCH v7 " Michel Thierry
2015-07-31 4:23 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 09/19] drm/i915/gen8: Pass sg_iter through pte inserts Michel Thierry
2015-07-30 4:19 ` Goel, Akash
2015-08-03 8:52 ` [PATCH v9 " Michel Thierry
2015-07-29 16:23 ` [PATCH v6 10/19] drm/i915/gen8: Add 4 level support in insert_entries and clear_range Michel Thierry
2015-07-30 4:50 ` Goel, Akash
2015-08-03 8:53 ` [PATCH v9 " Michel Thierry
2015-08-03 9:23 ` Goel, Akash
2015-08-05 15:46 ` Daniel Vetter
2015-08-05 16:13 ` Michel Thierry
2015-07-29 16:23 ` [PATCH v6 11/19] drm/i915/gen8: Initialize PDPs and PML4 Michel Thierry
2015-07-30 4:56 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 12/19] drm/i915: Expand error state's address width to 64b Michel Thierry
2015-07-30 5:09 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 13/19] drm/i915/gen8: Add ppgtt info and debug_dump Michel Thierry
2015-07-30 5:20 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 14/19] drm/i915: object size needs to be u64 Michel Thierry
2015-07-30 5:22 ` Goel, Akash
2015-07-29 16:23 ` [PATCH v6 15/19] drm/i915: batch_obj vm offset must " Michel Thierry
2015-07-30 5:23 ` Goel, Akash
2015-08-05 16:01 ` Daniel Vetter
2015-08-05 16:14 ` Michel Thierry
2015-08-06 12:30 ` Daniel Vetter
2015-07-29 16:24 ` [PATCH v6 16/19] drm/i915/userptr: Kill user_size limit check Michel Thierry
2015-07-30 5:25 ` Goel, Akash
2015-07-29 16:24 ` [PATCH v6 17/19] drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset Michel Thierry
2015-07-30 5:39 ` Goel, Akash
2015-08-05 15:58 ` Daniel Vetter
2015-08-05 16:14 ` Michel Thierry
2015-08-06 12:47 ` Daniel Vetter
2015-08-06 16:27 ` Michel Thierry
2015-08-07 7:55 ` Daniel Vetter
2015-07-29 16:24 ` [PATCH v6 18/19] drm/i915/gen8: Flip the 48b switch Michel Thierry
2015-07-30 5:49 ` Goel, Akash
2015-07-30 10:09 ` [PATCH v7 " Michel Thierry
2015-07-31 12:13 ` [PATCH v8 " Michel Thierry
2015-07-31 12:19 ` Chris Wilson
2015-07-31 12:35 ` Michel Thierry
2015-07-31 17:21 ` Goel, Akash
2015-07-29 16:24 ` [PATCH v6 19/19] drm/i915: Save some page table setup on repeated binds Michel Thierry
2015-07-30 11:26 ` [PATCH v6 00/19] 48-bit PPGTT Chris Wilson
2015-07-30 11:52 ` Michel Thierry
2015-07-30 12:13 ` Chris Wilson
2015-07-30 19:02 ` Chris Wilson
2015-08-03 9:51 ` Michel Thierry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55B9F014.5000507@intel.com \
--to=michel.thierry@intel.com \
--cc=akash.goel@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).