From: Sunil Kamath <sunil.kamath@intel.com>
To: Animesh Manna <animesh.manna@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>,
intel-gfx@lists.freedesktop.org,
Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Subject: Re: [SKL-DMC-BUGFIX 3/5] drm/i915/skl: Do not disable cdclk PLL if csr firmware is present.
Date: Tue, 04 Aug 2015 16:56:28 +0530 [thread overview]
Message-ID: <55C0A164.9030908@intel.com> (raw)
In-Reply-To: <1438619136-18268-4-git-send-email-animesh.manna@intel.com>
On Monday 03 August 2015 09:55 PM, Animesh Manna wrote:
> While display engine entering into low power state no need to disable
> cdclk pll as CSR firmware of dmc will take care. If pll is already
> enabled firmware execution sequence will be blocked. This is one
> of the criteria for dmc to work properly.
>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Damien Lespiau <damien.lespiau@intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Sunil Kamath <sunil.kamath@intel.com>
> Signed-off-by: Animesh Manna <animesh.manna@intel.com>
> Signed-off-bt: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index af0bcfe..ef2ef4d 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5675,10 +5675,13 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
> if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
> DRM_ERROR("DBuf power disable timeout\n");
>
> - /* disable DPLL0 */
> - I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
> - if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
> - DRM_ERROR("Couldn't disable DPLL0\n");
> + if (dev_priv->csr.dmc_payload) {
> + /* disable DPLL0 */
> + I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) &
> + ~LCPLL_PLL_ENABLE);
> + if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
> + DRM_ERROR("Couldn't disable DPLL0\n");
> + }
>
> intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
> }
Right bug fix.
Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-08-04 11:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 16:25 [SKL-DMC-BUGFIX 0/5] SKL PC10 entry fixes Animesh Manna
2015-08-03 16:25 ` [SKL-DMC-BUGFIX 1/5] drm/i915/gen9: Removed byte swapping for csr firmware Animesh Manna
2015-08-04 3:46 ` Nagaraju, Vathsala
2015-08-04 5:55 ` Animesh Manna
2015-08-05 9:01 ` Daniel Vetter
2015-08-06 9:20 ` Animesh Manna
2015-09-11 15:29 ` Mika Kuoppala
2015-09-14 7:35 ` [REGRESSION] " Daniel Vetter
2015-09-17 9:36 ` Mika Kuoppala
2015-08-04 11:24 ` [SKL-DMC-BUGFIX 1/5] " Sunil Kamath
2015-08-03 16:25 ` [SKL-DMC-BUGFIX 2/5] drm/i915/skl: Making DC6 entry is the last call in suspend flow Animesh Manna
2015-08-04 11:25 ` Sunil Kamath
2015-08-05 9:07 ` Daniel Vetter
2015-08-05 9:05 ` Daniel Vetter
2015-08-06 9:17 ` Animesh Manna
2015-08-06 10:50 ` [PATCH " Animesh Manna
2015-08-06 13:18 ` [SKL-DMC-BUGFIX " Daniel Vetter
2015-08-06 14:38 ` Animesh Manna
2015-08-06 15:38 ` Daniel Vetter
2015-10-12 13:32 ` Imre Deak
2015-10-12 15:43 ` [PATCH] drm/i915: Disable DC6 for now Rodrigo Vivi
2015-10-13 1:24 ` Hindman, Gavin
2015-08-03 16:25 ` [SKL-DMC-BUGFIX 3/5] drm/i915/skl: Do not disable cdclk PLL if csr firmware is present Animesh Manna
2015-08-04 11:26 ` Sunil Kamath [this message]
2015-08-05 9:12 ` Daniel Vetter
2015-08-06 9:03 ` Animesh Manna
2015-08-06 11:23 ` Animesh Manna
2015-10-12 13:37 ` Imre Deak
2015-10-12 14:07 ` Imre Deak
2015-10-12 14:46 ` Patrik Jakobsson
2015-10-12 15:11 ` Imre Deak
2015-08-03 16:25 ` [SKL-DMC-BUGFIX 4/5] drm/i915/skl: Block disable call for pw1 if dmc " Animesh Manna
2015-08-04 11:27 ` Sunil Kamath
2015-08-05 9:14 ` Daniel Vetter
2015-08-06 8:57 ` Animesh Manna
2015-10-12 13:45 ` Imre Deak
2015-08-03 16:25 ` [SKL-DMC-BUGFIX 5/5] drm/i915/skl: Removed csr firmware load in resume path Animesh Manna
2015-08-04 11:20 ` Sunil Kamath
2015-08-04 11:33 ` Animesh Manna
2015-08-06 9:49 ` Animesh Manna
2015-10-12 14:02 ` Imre Deak
2015-08-03 18:47 ` [SKL-DMC-BUGFIX 0/5] SKL PC10 entry fixes Zanoni, Paulo R
2015-08-04 11:31 ` Sunil Kamath
2015-08-04 13:14 ` Zanoni, Paulo R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C0A164.9030908@intel.com \
--to=sunil.kamath@intel.com \
--cc=animesh.manna@intel.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rajneesh.bhardwaj@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox