From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: [PATCH] drm/i915: Fix module initialisation, v2.
Date: Thu, 27 Aug 2015 15:15:15 +0200 [thread overview]
Message-ID: <55DF0D63.9000308@linux.intel.com> (raw)
In-Reply-To: <20150826081208.GY20434@phenom.ffwll.local>
Set DRIVER_MODESET and DRIVER_ATOMIC by default. The driver is fully atomic.
Remove the legacy suspend/resume, to fix a warning introduced by:
"drm: WARN_ON if a modeset driver uses legacy suspend/resume helpers"
and removing the .get_vblank_timestamp reset to NULL. It's a noop without UMS.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 097d4ba0421c..f0eaa6f8826b 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -364,12 +364,12 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
- i915_resume_legacy(dev);
+ i915_resume_switcheroo(dev);
dev->switch_power_state = DRM_SWITCH_POWER_ON;
} else {
pr_err("switched off\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
- i915_suspend_legacy(dev, pmm);
+ i915_suspend_switcheroo(dev, pmm);
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
}
}
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ce3bd0c713b9..4646fe1a0499 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -679,7 +679,7 @@ static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation)
return 0;
}
-int i915_suspend_legacy(struct drm_device *dev, pm_message_t state)
+int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state)
{
int error;
@@ -812,7 +812,7 @@ static int i915_drm_resume_early(struct drm_device *dev)
return ret;
}
-int i915_resume_legacy(struct drm_device *dev)
+int i915_resume_switcheroo(struct drm_device *dev)
{
int ret;
@@ -1649,7 +1649,7 @@ static struct drm_driver driver = {
*/
.driver_features =
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
- DRIVER_RENDER,
+ DRIVER_RENDER | DRIVER_MODESET,
.load = i915_driver_load,
.unload = i915_driver_unload,
.open = i915_driver_open,
@@ -1658,10 +1658,6 @@ static struct drm_driver driver = {
.postclose = i915_driver_postclose,
.set_busid = drm_pci_set_busid,
- /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
- .suspend = i915_suspend_legacy,
- .resume = i915_resume_legacy,
-
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = i915_debugfs_init,
.debugfs_cleanup = i915_debugfs_cleanup,
@@ -1704,7 +1700,6 @@ static int __init i915_init(void)
* either the i915.modeset prarameter or by the
* vga_text_mode_force boot option.
*/
- driver.driver_features |= DRIVER_MODESET;
if (i915.modeset == 0)
driver.driver_features &= ~DRIVER_MODESET;
@@ -1715,17 +1710,11 @@ static int __init i915_init(void)
#endif
if (!(driver.driver_features & DRIVER_MODESET)) {
- driver.get_vblank_timestamp = NULL;
/* Silently fail loading to not upset userspace. */
DRM_DEBUG_DRIVER("KMS and UMS disabled.\n");
return 0;
}
- /*
- * FIXME: Note that we're lying to the DRM core here so that we can get access
- * to the atomic ioctl and the atomic properties. Only plane operations on
- * a single CRTC will actually work.
- */
if (i915.nuclear_pageflip)
driver.driver_features |= DRIVER_ATOMIC;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8c938451a05e..5c2541ddf212 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2607,8 +2607,8 @@ struct drm_i915_cmd_table {
extern const struct drm_ioctl_desc i915_ioctls[];
extern int i915_max_ioctl;
-extern int i915_suspend_legacy(struct drm_device *dev, pm_message_t state);
-extern int i915_resume_legacy(struct drm_device *dev);
+extern int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state);
+extern int i915_resume_switcheroo(struct drm_device *dev);
/* i915_params.c */
struct i915_params {
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-08-27 13:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-17 10:00 drm/i915: Fix module initialisation Maarten Lankhorst
2015-08-17 10:09 ` Chris Wilson
2015-08-26 7:51 ` Daniel Vetter
2015-08-26 7:57 ` Maarten Lankhorst
2015-08-26 8:12 ` Daniel Vetter
2015-08-27 13:15 ` Maarten Lankhorst [this message]
2015-08-29 21:51 ` [PATCH] drm/i915: Fix module initialisation, v2 shuang.he
2015-08-31 22:13 ` Matt Roper
2015-09-01 10:12 ` Daniel Vetter
2015-09-01 11:51 ` Maarten Lankhorst
2015-09-02 7:53 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DF0D63.9000308@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox