From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 10/10] drm/i915: Only run commit when crtc is active.
Date: Mon, 14 Sep 2015 12:02:18 +0200 [thread overview]
Message-ID: <55F69B2A.3030004@linux.intel.com> (raw)
In-Reply-To: <20150910155156.GK2767@phenom.ffwll.local>
Op 10-09-15 om 17:51 schreef Daniel Vetter:
> On Thu, Sep 10, 2015 at 04:08:05PM +0200, Maarten Lankhorst wrote:
>> The crtc->active guards are no longer needed now that all state
>> updates are outside the commit.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> This looks actually complicated, so I'll punt. Merged most of the other
> patches from your series, thanks.
It's very easy, but needs previous patches to be applied, the fixup patch for intel_update_primaries and the update primary plane state outside commit_primary_plane patch.
With all state updates in commit gone, only hw state is still updated.
Each commit_plane has a line with if (!crtc->state->active) return; eg its a noop when crtc is inactive. Same for begin/finish crtc_commit.
Hence it could be changed to
if (crtc->state->active)
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
When planes_changed = false, there is no plane state for the current crtc. The other function of begin_crtc_commit is updating pipe config for a fastset.
If neither are required, there's no hw state to update, so commit_planes_on_crtc would do vblank evasion for no reason. It can be skipped.
Maybe it's easier to understand if I split this up in 2 patches. One to make the crtc->state->active changes, another to add the planes_changed || update_pipe changes.
> -Daniel
>> ---
>> drivers/gpu/drm/i915/intel_display.c | 16 ++++++----------
>> drivers/gpu/drm/i915/intel_sprite.c | 3 ---
>> 2 files changed, 6 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index f41ca558ba3b..dc696ec5f228 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -13135,7 +13135,9 @@ static int intel_atomic_commit(struct drm_device *dev,
>> if (!modeset)
>> intel_pre_plane_update(intel_crtc);
>>
>> - drm_atomic_helper_commit_planes_on_crtc(crtc_state);
>> + if (crtc->state->active && (crtc->state->planes_changed ||
>> + to_intel_crtc_state(crtc->state)->update_pipe))
>> + drm_atomic_helper_commit_planes_on_crtc(crtc_state);
>>
>> if (put_domains)
>> modeset_put_power_domains(dev_priv, put_domains);
>> @@ -13445,9 +13447,6 @@ intel_commit_primary_plane(struct drm_plane *plane,
>>
>> crtc = crtc ? crtc : plane->crtc;
>>
>> - if (!crtc->state->active)
>> - return;
>> -
>> dev_priv->display.update_primary_plane(crtc, fb,
>> state->src.x1 >> 16,
>> state->src.y1 >> 16);
>> @@ -13476,8 +13475,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc,
>> intel_update_watermarks(crtc);
>>
>> /* Perform vblank evasion around commit operation */
>> - if (crtc->state->active)
>> - intel_pipe_update_start(intel_crtc);
>> + intel_pipe_update_start(intel_crtc);
>>
>> if (modeset)
>> return;
>> @@ -13493,8 +13491,7 @@ static void intel_finish_crtc_commit(struct drm_crtc *crtc,
>> {
>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>>
>> - if (crtc->state->active)
>> - intel_pipe_update_end(intel_crtc);
>> + intel_pipe_update_end(intel_crtc);
>> }
>>
>> /**
>> @@ -13677,8 +13674,7 @@ intel_commit_cursor_plane(struct drm_plane *plane,
>> intel_crtc->cursor_bo = obj;
>>
>> update:
>> - if (crtc->state->active)
>> - intel_crtc_update_cursor(crtc, state->visible);
>> + intel_crtc_update_cursor(crtc, state->visible);
>> }
>>
>> static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
>> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
>> index 9553859ca151..9c13d8156135 100644
>> --- a/drivers/gpu/drm/i915/intel_sprite.c
>> +++ b/drivers/gpu/drm/i915/intel_sprite.c
>> @@ -927,9 +927,6 @@ intel_commit_sprite_plane(struct drm_plane *plane,
>>
>> crtc = crtc ? crtc : plane->crtc;
>>
>> - if (!crtc->state->active)
>> - return;
>> -
>> if (state->visible) {
>> intel_plane->update_plane(plane, crtc, fb,
>> state->dst.x1, state->dst.y1,
>> --
>> 2.1.0
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2015-09-14 10:02 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-10 14:07 [PATCH 00/10] Nuke some legacy state Maarten Lankhorst
2015-09-10 14:07 ` [PATCH 01/10] drm/i915: Use atomic plane state in the primary plane update Maarten Lankhorst
2015-09-14 13:27 ` Ville Syrjälä
2015-09-14 13:40 ` Maarten Lankhorst
2015-09-14 13:54 ` Ville Syrjälä
2015-09-14 14:23 ` Daniel Vetter
2015-09-14 14:31 ` Ville Syrjälä
2015-09-10 14:07 ` [PATCH 02/10] drm/i915: Use the plane state in intel_crtc_info Maarten Lankhorst
2015-09-10 14:07 ` [PATCH 03/10] drm/i915: Use the atomic state in intel_update_primary_planes Maarten Lankhorst
2015-09-10 15:32 ` Daniel Vetter
2015-09-10 15:43 ` Ville Syrjälä
2015-09-10 16:31 ` Daniel Vetter
2015-09-10 16:34 ` Ville Syrjälä
2015-09-14 9:02 ` Daniel Vetter
2015-09-14 9:41 ` [fixup PATCH] drm/i915: Only commit active planes when updating planes during reset Maarten Lankhorst
2015-09-14 13:12 ` Daniel Vetter
2015-09-10 14:07 ` [PATCH 04/10] drm/i915: Use atomic state when changing cursor visibility Maarten Lankhorst
2015-09-10 15:46 ` Ville Syrjälä
2015-09-10 14:08 ` [PATCH 05/10] drm/i915: Remove legacy plane updates for cursor and sprite planes Maarten Lankhorst
2015-09-10 15:38 ` Daniel Vetter
2015-09-10 14:08 ` [PATCH 06/10] drm/i915: Update legacy primary state outside the commit hook Maarten Lankhorst
2015-09-10 15:41 ` Daniel Vetter
2015-09-14 9:52 ` Maarten Lankhorst
2015-09-14 13:13 ` Daniel Vetter
2015-09-14 13:16 ` Maarten Lankhorst
2015-09-14 14:26 ` Daniel Vetter
2015-09-23 14:08 ` Maarten Lankhorst
2015-09-10 14:08 ` [PATCH 07/10] drm/i915: Do not handle a null plane state Maarten Lankhorst
2015-09-10 14:08 ` [PATCH 08/10] drm/i915: Use crtc->state for duplication Maarten Lankhorst
2015-09-10 15:46 ` Daniel Vetter
2015-09-10 15:49 ` Daniel Vetter
2015-09-10 14:08 ` [PATCH 09/10] drm/i915: Kill off a user of update_state_fb Maarten Lankhorst
2015-09-10 15:50 ` Daniel Vetter
2015-09-14 9:56 ` Maarten Lankhorst
2015-09-10 14:08 ` [PATCH 10/10] drm/i915: Only run commit when crtc is active Maarten Lankhorst
2015-09-10 15:51 ` Daniel Vetter
2015-09-14 10:02 ` Maarten Lankhorst [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F69B2A.3030004@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox